To replace a vacuum cleaner belt, unplug the machine, fit a belt made for its exact model, clear the brushroll area, and follow the model’s belt path and reassembly instructions. Belt access and routing differ between vacuums, so treat the steps below as a general sequence—not a universal repair procedure.
Before you start: confirm the belt and the cause
Switch off and unplug the vacuum before examining or servicing it. The Eureka AirSpeed User Manual warns: “Turn off and unplug vacuum cleaner before performing maintenance to the vacuum cleaner.” Let the brush area cool if the vacuum has just been used.
Find the model number and use the manual or manufacturer’s parts lookup to identify the replacement belt and the correct access procedure. Belts are not universal: a part number listed for one model should not be assumed to fit another. BISSELL’s CleanView instructions direct owners to model-specific replacement belts, while Hoover UK’s guidance identifies parts for particular models.
A broken, cracked, cut, visibly worn, stretched, or slipping belt can need replacement. A brushroll that stops turning or changes in pickup or sound can also point to a blockage or another issue, so inspect the roller and its surroundings rather than assuming the belt is the only cause.
Recommended Free Tools
#1 Best Overall
- PERFECT UNIVERSAL COMPATIBILITY：These 3031120 belt Compatibility With Perfectly fits Bissell style 7/9/10/12/14/16，Suitable for most Bissell vacuum cleaner models series ：2252, 2254,1793,1792,2259,22543,2256 ,82H1, 2191U,2191,2260,21K3,22C1, 3522, 3545, 35451, 35455, 3590, 35931, 3574, 3575, 3576, 3590,3591,3593, 3910,3920, 3594, 3990, 4104, 44M3, 46E5, 6390W, 6579, 6582, 6583, 6584,6585, 8975,6590,6594, 6596, 71Y7, 82G7, 92L3P, 92L3,1797,1331,1831,1825, 2258,2487 ,2488, 2490,82H1,1739 ,2019, 68C7,98N4 ,2491, 2492, 2739, 2190,1240,1700,2692 etc
- INCOMPATIBILITY：These vacuum belt incompatible with Part Number 1413, 1797, 1816, 1981, 2112, 3576, 61C5, 6584, 6585, 9595, 9595A, 23T7T, 35831, 68C71, 98NA1, 23T7-V, 68C7-U
- EASY TO INSTALL： Just remove the screw to lift off brush plate, remove the roller and the old belt, then attach the new belt to the motor pulley and the roller. With the belt in place, push and slide the roller into the unit, making sure that the roller is in the correct place. If the belt is too tight to install, please stop the installation
- PREMIUM QUALITY：Our vacuum cleaner belts are made from high-quality rubber, offering durability and flexibility. The belt has a 14.72-inch perimeter. Please verify the belt length of your vacuum for accurate fitment before purchasing
- 2 PIECES REPLACEMENT VACUUM CLEANER BELT FOR BISSELL： With frequent use of the vacuum cleaner, the belt will wear out. Replace your 3031120 vacuum belt every 3 to 6 months to keep your vacuum cleaning performance. These 3031120 vacuum belt fits for Bissell vacuum styles 7, 9, 10, 12, 14, 16
Steps to change a vacuum belt
- Unplug the vacuum. Do not open the brushroll area while the machine is connected to power.
- Expose the brushroll. Turn or lay the vacuum as its manual directs, then release the brushroll cover using that model’s latches, locking bar, or screws. Cover designs vary: BISSELL’s cited CleanView procedure removes seven screws with a Phillips-head screwdriver, while a Hoover procedure uses a locking bar and removes the top cover. These are examples, not general fastener instructions. BISSELL CleanView procedure · Hoover procedure.
- Remove the brushroll if the manual calls for it, then take off the old belt. Keep track of the roller’s ends, caps, and orientation so they can be reseated correctly.
- Clear and inspect the area. Remove hair, thread, carpet fibers, and other debris from the brushroll, motor pulley, and belt area. Check the roller for damage and confirm it turns freely by hand. Obstructions can keep a brush roller from moving and may contribute to a rubber-burning smell; Panasonic’s troubleshooting advice recommends checking for string, carpet fiber, and hair.
- Fit the replacement belt along the model’s specified path. Put it on the motor pulley and the designated section of the brushroll, following the manual’s orientation. For example, the Eureka AirSpeed manual describes placing the belt over the motor shaft and stretching the other end over the floor brush between the bristles. Dyson DC01 instructions use a different fitting approach. Do not transfer one model’s routing to another. Eureka AirSpeed User Manual · Dyson DC01 belt instructions.
- Reseat and check the brushroll. Align its ends and caps as the manual specifies. Rotate it by hand several times; it should move smoothly, and the belt should remain centered and untwisted.
- Close the cover and secure its fasteners. Refit every screw, latch, or locking part removed during access before reconnecting power.
When to stop and troubleshoot further
If the brushroll still will not turn freely by hand after debris is removed and the belt is fitted correctly, do not force it or run the vacuum with the cover open. Recheck the model’s assembly instructions and inspect the roller and pulley for damage. If you cannot identify the correct belt path or the parts do not reseat as shown in the manual, stop and consult the manufacturer’s model-specific guidance or a qualified repair service.
A rubber-burning smell is a reason to switch off, unplug, and inspect for an obstructed roller or a stuck or broken belt—not a reason to keep running the vacuum to test it. Changed sound or poor pickup alone does not establish that the belt is at fault.
Rank #2
- WIDE COMPATIBILITY: These vacuum belts 303 1120 are compatible with Bissell CleanView Swivel Rewind Pet Vacuum (2256, 2254, 22543, 22548, 2255, 2739, 2258, 22547, 22549, 2252, 2316, 2488, 2486, 2487, 2492, 2490, 2489, 24899, 2491, 1243, 1819, 1820, 1822, 1825, 1838, 9595R, 1319, 1331); PowerForce Helix/Turbo Bagless (2191, 2191U, 2190, 1700, 1701, 2691, 2692, 1240, 12B1, 68C7, 3920, 1739, 6582, 6584); PowerLifter Swivel Pet(1792, 1793, 2259, 2260, 1309), part #2031093 #32074 #3031123 #160412
- WIDE COMPATIBILITY: These fit for bissell belt 7/9/10 p/n 3031120 also compatible with Bissell Powergroom Helix Rewind/Swivel Pet Vacuum(98N4, 4104W, 4104, 41041, 4104R, 22528); PowerClean Vacuum(2256K, 2494, 92L3P, 1330K, 62X5); PowerRease Swivel Rewind Pet Vacuum 2253
- DIMENSION: The perimeter of our fit for bissell 3031120 belt is 14.72 inches. In order to choose the right belt for your vacuum, please check the length of the fit for bissell vacuum belt 7/9/10 p/n 3031120 from your own machine before purchasing.
- REPLACEMENT CYCLE: Replace your 3031120 belts every 3 to 6 months to keep your vacuum cleaning performance
- These 3031120 vacuum belt fits for Bissell vacuum styles 7, 9, 10, 12, 14, 16
How often should a vacuum belt be replaced?
Follow the maintenance schedule for the exact model. Hoover UK recommends replacing the belt at least once per year for models covered by its advice page; that interval should not be applied automatically to other vacuums. Other reviewed instructions emphasize inspection or replacement when wear or slipping is evident, and maintenance schedules differ by model. Hoover UK belt guidance · Eureka AirSpeed User Manual.
Quick Recap
Best Value
- WIDE COMPATIBILITY: These vacuum belts 303 1120 are compatible with Bissell CleanView Swivel Rewind Pet Vacuum (2256, 2254, 22543, 22548, 2255, 2739, 2258, 22547, 22549, 2252, 2316, 2488, 2486, 2487, 2492, 2490, 2489, 24899, 2491, 1243, 1819, 1820, 1822, 1825, 1838, 9595R, 1319, 1331); PowerForce Helix/Turbo Bagless (2191, 2191U, 2190, 1700, 1701, 2691, 2692, 1240, 12B1, 68C7, 3920, 1739, 6582, 6584); PowerLifter Swivel Pet(1792, 1793, 2259, 2260, 1309), part #2031093 #32074 #3031123 #160412
- INCOMPATIBILITY: These style 7/9/10 p/n 3031 120 belts are incompatible with Bissell model 1413, 1797, 1816, 1831, 1981, 2112, 3576, 61C5, 6584, 6585, 9595, 23T7T, 35831, 68C71, 98NA1, 23T7-V, 68C7-U. If the belt is too tight to install, please stop the installation.
- DIMENSION: The perimeter of our style 7/9/10 p/n 3031120 belt is 14.72 inches. In order to choose the right belt for your vacuum, please check the length of the vacuum belt 7/9/10 from your own machine before purchasing.
- REPLACEMENT CYCLE: Replace your 3031120 belts every 3 to 6 months to keep your vacuum cleaning performance
- Replacement belt fits for Bissell Vacuum Styles 7, 9, 10, 12, 14, 16
Rank #4
- 【Compatibility】 Vacuum belt compatible with Bissell vacuum cleaner model 2252, 2260, 2259, 1793, 1792, 2254, 22543, 21K3, 22C1, 3522, 3545, 35451, 35455, 3590, 35931, 3574, 3575, 3576, 3590, 3591, 3593, 3910, 3920, 3594, 3990, 4104, 44M3, 46E5, 6390W, 6579, 6582, 6583, 6584, 6585, 8975, 6590, 6594, 6596, 71Y7, 82G7, 82H1, 92L3P, 92L3. Fits for Bissell Vacuum Styles 7, 9, 10, 12, 14, 16
- 【High Material】The style 7/9/10 belt for Bissell is made of high quality rubber, durable and flexible, long lasting reliability. These vacuum parts can keep your vacuum machine working in prime condition
- 【Replace Regularly】Replace your 3031120 belts for Bissell vacuum every 3 to 6 months to ensure your machine cleaning performance
- 【Easy to install】It is Simply remove the broken belt from your vacuum head and replace this new one in the original position, reactivate your vacuum cleaner
- 【What You Get】 3* Replacement Belts 3031120, you can quickly replace it and get your machine working again when the belts break，If you have any questions please contact us anytime
Rank #3
- COMPATIBILITY: Compatible with Eureka Sanitaire Commercial Vacuum model SC679, SC684, SC688, SC689, SC886, SC887, SC888, SC889, SC899, SC9050D, 1934, 1950, 6426, 6436, AC2094, AM688, AU887, BC2137, C2031, C2032, C2094, C2095, C2132, C2133, C2194, C4046, C4047, C4446, EP888, EP899, EP9025, HC2135, HD2094, HE4046, HE679, HE688, LC2356, MC679, ML1000, ML1200, NC2031, S634, S635, S639, S645, S647, S649, S661, S663, S670, S675, S677, S9020, SC6484, SC678, SC685, SC695, SC881, SC882, SC883, TC2032
- 30563A 30563B BELT: The vacuum belt has also described as part number 30563A, 30563B, style type RD, 52100, 52100B, 52100C, 52100D, these vacuum cleaner belts fit for all Eureka and Sanitaire upright vacuums with the round tube type belt
- PREMIUM QUALITY: Made of high quality rubber, the upright vacuum belt for sanitaire vacuum parts is safe, durable and flexible. These belts keep your vacuum machine working in prime condition
- EASY TO REPLACE: 10 Pack Replacement Belts. Simply remove the damaged belt from your vacuum head and replace this new drive belt in the original position, bring your vacuum cleaner back to life
- REPLACEMENT CYCLE: For optimum performance, replace your vacuum parts every 3 to 6 months to keep your machine cleaning performance
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
