PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteFor a small patch on a hard, washable surface, scrub with detergent and water, then dry it completely. The lasting fix is to stop the moisture—repair the leak, reduce condensation, or correct the water intrusion. Moldy porous materials such as carpet and ceiling tiles may need to be removed. The U.S. Environmental Protection Agency (EPA) does not recommend bleach as a routine mold-cleanup method.
First, decide whether it is safe to clean yourself
Estimate the affected area and look for the source of moisture before disturbing the growth. EPA guidance says occupants can usually handle areas smaller than about 10 square feet. Use additional caution and consider a qualified remediation professional when the area is larger, water damage is extensive, the water was sewage or otherwise contaminated, or mold may be inside an HVAC system. Do not run an HVAC system you suspect is contaminated; it could distribute mold through the building.
People with asthma, allergies, other respiratory symptoms, or other health concerns should consult a health professional before starting cleanup. EPA lists allergic reactions, asthma, and respiratory complaints among potential effects associated with mold exposure.
How to remove mold from a small hard surface
- Stop the water. Repair the plumbing leak, roof or wall intrusion, or recurring condensation. Dry wet materials and the surrounding area.
- Protect yourself. Wear gloves and goggles. EPA recommends goggles without ventilation holes. Protective equipment does not make a large, contaminated, or HVAC-related cleanup appropriate for do-it-yourself work.
- Scrub with detergent and water. Work the solution into the hard surface, following the cleaner’s label directions. Routine cleanup does not require a specialized mold-killing product.
- Remove residue and dry thoroughly. Remaining moisture supports new growth, so dry the surface and nearby materials completely.
- Check the area again. The moisture problem should be fixed, visible mold and moldy odors should be gone, and a follow-up inspection should show no renewed water damage or growth.
Choose the method by material
| Material or situation | Recommended approach | Why it matters |
|---|---|---|
| Hard, washable surfaces | Scrub with detergent and water; dry completely. | Growth can generally be removed from the surface when the substrate is intact. |
| Carpet, ceiling tiles, and other porous materials | Remove and discard when moldy; ask a restoration specialist about valuable or sentimental items. | Mold can grow inside pores and crevices where complete cleaning is difficult or impossible. |
| Large area, extensive water damage, contaminated water, or suspected HVAC contamination | Stop work and obtain qualified professional guidance. | These conditions increase the chance of hidden contamination or spread. |
Should you use bleach to clean mold?
EPA says biocides such as chlorine bleach are not recommended for routine mold cleanup. Dead mold can still trigger allergic reactions, so killing it does not replace physical removal. If a disinfectant or biocide is used for a situation where it is appropriate, ventilate the area and exhaust air outdoors. Never mix bleach with an ammonia-containing cleaner.
#1 Best Overall
- BRIGHTER RESULTS INSTANTLY: Noticeably brightens indoor and outdoor surfaces, removing black mold and mildew stains as you watch, with no scrubbing or pressure washing required for fast, visible results
- NO SCRUBBING REQUIRED: Avoid the hassle and backbreaking work of scrubbing tough stains; the PRO formula lifts mold and mildew stains on contact so you simply apply, watch and rinse where needed
- 2X STRONGER FORMULA: The PRO formula is 2X stronger than the standard 30 SECONDS Outdoor Cleaner, made for your toughest black mold and mildew stains and messes on both indoor and outdoor surfaces
- OUTDOOR AND INDOOR USE: Use on siding, fences, decks, concrete floors, brick walls, drywall, wood, kitchen surfaces, bathroom tile and grout, bathtub soap scum and showers where mold and mildew can grow
- REMOVES BLACK MOLD STAINS & MORE: Targets stubborn black mold and mildew stains on a wide range of surfaces, giving a brighter, cleaner result indoors and outdoors without scrubbing or pressure washing
How to prevent mold from returning
Control moisture quickly
Dry wet or damp materials within 24–48 hours when possible. Repair plumbing leaks and other water problems promptly. Maintain gutters, make sure exterior grading directs water away from the foundation, and keep air-conditioning drip pans and drain lines clear.
Manage indoor humidity
EPA suggests keeping relative humidity below 60% if possible, ideally between 30% and 50%. An inexpensive indoor digital hygrometer (humidity meter) can show relative humidity in a room; it measures conditions but cannot repair a leak or remove existing mold. Use air conditioning or a dehumidifier when appropriate.
Rank #2
- GET RID OF STUBBORN MOLD AND MILDEW STAINS: Our instant spray cleaner removes the stains left behind from black mold and mildew. They tend to leave behind ugly staining that can go deep below the surface; Our professional-strength spray is specifically formulated to eliminate discoloration caused by mold and mildew
- USING RMR-86: To safely and conveniently eliminate indoor mold and mildew stains and odors using RMR-86, proper ventilation and PPE should be used for each application
- SAFE TO USE ON MULTIPLE SURFACES: Easily remove stubborn stains from decks, wood, vinyl siding, drywall, concrete floors, brick walls, kitchen surfaces, and other areas where mold and mildew tend to grow
- FAST-ACTING SPRAY: Our powerful, fast-acting mold stain remover spray begins working instantly to target deeply embedded stains that linger on surfaces and hard-to-reach areas
- NO SCRUBBING NEEDED: Simply spray our ready-to-use formula on the affected area and watch the stains disappear right before your eyes!
Stop condensation
When condensation appears on windows, walls, or pipes, dry it and address the underlying moisture. In bathrooms, run an exhaust fan or open a window during and after bathing, and clean recurring damp areas more often.
Do not cover mold
Do not paint or caulk over mold. Clean and dry the surface first; coatings applied over mold are likely to peel and can hide continuing damage.
Rank #3
- Eliminates & Helps Prevent Mold: Targets existing mold at the source and leaves behind an invisible barrier that helps prevent future growth.
- EPA-Registered Solution: Registered with the U.S. Environmental Protection Agency for mold control when used as directed.
- Bleach-Free, Odorless, VOC-Free: Contains no bleach, ammonia, or volatile organic compounds, helping maintain healthy indoor air quality.
- Safe on Most Surfaces: Works on drywall, wood, tile, grout, concrete, fabric, and other common building materials.
- Versatile Use: Ideal for bathrooms, kitchens, basements, attics, laundry rooms, vehicles, and outdoor surfaces such as decks and patios.
How to tell whether the cleanup worked
- The leak, intrusion, or condensation source has been corrected.
- Wet materials are fully dry.
- Visible mold has been removed from cleanable surfaces, and moldy porous items have been appropriately discarded or professionally restored.
- Moldy odors are absent.
- A follow-up inspection finds no new water damage or mold growth.
The EPA’s homeowner guidance emphasizes that cleaning without fixing the water problem usually leads to recurrence. Its page “How do I get rid of mold?” was last updated September 8, 2026; the agency states, “If you clean up the mold, but don’t fix the water problem, then, most likely, the mold problem will come back.”
Quick Recap
Rank #4
- KILLS MOLD: EPA-registered formula kills mold and helps control mold and mildew on hard, nonporous surfaces when used as directed
- CLEANS AND DISINFECTS: Ready-to-use disinfectant cleaner provides non-acid cleaning performance while disinfecting treated hard, nonporous surfaces
- INHIBITS MILDEW GROWTH: Helps inhibit the growth of mold and mildew and the odors they cause when applied according to label directions.
- BLEACH-FREE FORMULA: Bleach-free cleaner deodorizes treated surfaces and leaves behind a fresh scent
- READY-TO-USE SPRAY: 32 fl oz trigger bottle is designed for household, commercial and industrial cleaning applications
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
