For a standard removable shelf, open the refrigerator door fully, gently lift the shelf at the front, and slide it out while supporting its weight. If you mean the glass panel directly above the crisper drawers, remove the drawers first and release the shelf tabs; that assembly varies by model. Do not force a shelf that resists, and avoid lifting a hooked shelf all the way up because it can dent the refrigerator’s rear wall on some models.
First identify which shelf you are removing
Samsung refrigerators use different shelf designs. An ordinary shelf is typically held by hooks that fit into notches. The glass panel over the fruit and vegetable drawers is a separate crisper-cover assembly and may attach to a drawer divider or water-filter housing.
| Shelf type | How it releases | What to check |
|---|---|---|
| Ordinary hooked shelf | Gently lift the front and slide the shelf out. | Support the shelf and avoid lifting it fully; on some models that can dent the rear wall. |
| Glass shelf above the crisper drawers | Remove both drawers, press the release tabs at the divider or water-filter housing, then lift and pull the shelf out. | This procedure describes a particular Samsung French door assembly. Confirm the design in your model’s manual. |
Remove an ordinary refrigerator shelf
- Open the refrigerator door fully so you can access the shelf and its supports.
- Hold the front of the shelf, gently lift it, and slide it toward you. Do not lift it fully: Samsung cautions that the rear wall can be dented on some models.
- Keep the shelf supported as it clears the rails. Tempered glass is heavy, so use care while carrying it.
Remove the glass shelf above the crisper drawers
These steps apply to the specific bottom-glass-shelf assembly described in Samsung Gulf’s instructions for French door refrigerators. Shelf appearance and release details differ by model.
- Slide out both fruit and vegetable drawers, angling each slightly toward the center as you remove it.
- Locate the tabs on both sides of the drawer divider or water-filter housing. Press them to separate the shelf from the housing.
- Lift the shelf slightly while pulling it out. If needed, angle one side downward to help it clear the refrigerator; stop if it resists rather than forcing it.
- Set the shelf on a clean, flat surface. If you are separating the glass from its frame for cleaning, release the retainer clips at the rear corners as directed for your assembly.
Reinstall the shelf and check that it is seated
Ordinary hooked shelf
- Hold the shelf at an angle with its front higher than its back.
- Fit the top hook into its notch, then lower the shelf so the bottom hook seats in its notch.
- Check that the shelf is correctly oriented and seated before placing food on it.
Crisper-cover assembly
Reinstall the glass shelf and drawers by reversing the removal steps. Make sure the shelf is fully seated in its supports before loading it.
#1 Best Overall
- ONLY for DA97-12650A Right Side Samsung Door Shelf! NOT for DA97-12657A Left Door Bin: Right side refrigerator replacement shelves ONLY for DA97-12650A, AP5620330, 2692337, PS4176653, DA63-07104A, DA63-06963A Samsung fridge door shelves. Notice: the replacement for Samsung french door refrigerator is NOT universal fridge door bin for Samsung, it ONLY for the part numbers we listed and ONLY fit for the upper slot on the right refrigerator-side door. It will Not fit for the bottom slots or the freezer-side door. Please check your part number, fridge models and slot location before purchase.
- How to Confirm Compatibility Before Purchasing: Step 1: Confirm Model Number: Find your fridge's model and serial number on the bottom left exterior or inside the top compartment. Ensure it matches the listed compatible models. Step 2: Correct Placement: Only for upper shelves of right side (Note: It will NOT fit the bottom slots or the freezer-side door). Step 3: Check Dimensions: Please refer to the detailed size in our 2nd image and measure the dimensions of the refrigerator bin in all directions (must include the side latches). Important Notice: Deviation of any side must be less than 1/8" or it will not fit! Double-check your measurements to ensure compatibility before purchasing.
- Fits These Models We Listed: Please Double-Check Compatibility! RF26HFPNBSR/AA, RF260BEAEBC/AA, RF260BEAESG/AA, RF260BEAESL/EM, RF260BEAESP/AA, RF260BEAESR/AA, RF260BEAEWW/AA; RF261BEAEBC/AA, RF261BEAESG/AA, RF261BEAESP/AA, RF261BEAESR/AA, RF261BEAEWW/AA, RF261BIAESR/AA; RF263BEAEBC/AA, RF263BEAEBC/CL, RF263BEAEBC/PE, RF263BEAESP/AA, RF263BEAESR/AA, RF263BEAEWW/AA, RF263TEAEBC/AA, RF263BEAESG/AA, RF263TEAESG/AA, RF263TEAESP/AA, RF263TEAESR/AA, RF263TEAEWW/AA. Notice: NOT for RF265/RF262 series.
- Come with 5 PCS Fridge Magnets: The bin for Samsung fridge shelf replacement with 5 PCS cute fridge magnets. The refrigerator magnets for Samsung rf260beaesr parts are print with varied exquisite fruit patterns, which can decorate your kitchen or office and makes your life more interesting.
- Premium Quality: DA97-12650A door shelf for Samsung refrigerator door bin is manufactured with premium materials, for durability, pollution-free, safe, hygienic and exact fit. Easy to install and clean, save your time and money.
Handle glass safely and clean it carefully
- Support the shelf during removal, transport, and cleaning. Samsung warns that glass can break and cause injury.
- Do not rinse cold glass with warm or hot water. Let it reach room temperature first, then use lukewarm water.
- For separated panes, Samsung Gulf recommends water and mild detergent or glass cleaner, followed by drying with a clean, lint-free cloth.
What to do if the shelf will not come out
Do not pry or pull harder. The release method and shelf geometry are model-specific, and a Samsung manual notes that shelf appearance differs by model. Find the refrigerator’s model code and consult its manual before trying another release method. If a retainer clip is damaged, Samsung’s bottom-shelf guidance says the clip is not replaced individually; the shelf must be replaced as an assembly. Verify the exact model compatibility before sourcing a replacement.
Sources: Samsung Gulf: Steps to Remove the Bottom Glass Shelf in a Samsung French Door Fridge (updated March 6, 2025); Samsung Support US: refrigerator shelf and drawer removal and cleaning guide.
Quick Recap
Rank #4
- Compatible Samsung Refrigerator door shelf: Refrigerator door shelf bin DA63-08645A for Samsung refrigerator door shelf RT18M6213SG/AA-00, RT18M6213SG/AA-01, RT18M6213SG/AA-02, RT18M6213SG/AA-03, RT18M6213SG/AA-04, RT18M6215SR/AA-00, RT18M6215SR/AA-01, RT18M6215SR/AA-02, RT18M6215WW/AA-00, RT18M6215WW/AA-01, RT18M6215WW/AA-02, RT18M6215WW/AA-03, RT18M6215WW/AA-04, RT18M6213WW/AA-00, RT18M6213WW/AA-01, RT18M6213WW/AA-02, RT18M6213WW/AA-03, RT18M6213WW/AA-04, RT18M6213SR/AA-00, RT18M6213SR/AA-01, RT18M6213SG/AA-00, RT18M6213SG/AA-01, RT18M6213SG/AA-02, RT18M6213SG/AA-03, RT18M6213SG/AA-04
- Rt18m6215sg Door Shelves Part Number: Da63-08645a refrigerator 24'' door bin compatible with Samsung refrigerator door shelf part numbers: PD00044855, 4864777, AP6241328, PS12082570, EAP12082570 PD00044855, 4864777, AP6241328, PS12082570, EAP12082570
- Easy to Install: Our door bin snaps into place in seconds and is engineered as the perfect shelf for rt18m6215sr, fully replacing the original samsung rt18m6215sr fridge door shelf .Simply align and push to secure your new rt18m6215sr aa door shelf, giving you a snug, wobble-free fit every time—no tools required!
- Upgrade Quality: samsung rt18m6215sr fridge door shelf Better materials and precise dimensions have higher strength and toughness than OEM.
- Purchase Note: DA63-08645A jumbo door shelf bin for refrigerator lower door bin, length 23.9 in, width 6.6 in, and height 3.9 in. Before purchasing the DA63-08645A refrigerator door, please take a ruler and measure the dimensions of your refrigerator box against the dimensions provided by us. (If the size deviation is too large, please check whether the model is correct.)
Rank #3
- 【Upgraded DA97-20647A Glass Shelf Replacement】Upgraded Samsung DA97-20647A Glass Shelf Made of 9H hardness Tempered Glass, which is scratch resistant, break-resistant, stronger and tougher than ordinary materials. 3mm thick strengthened glass has good load-bearing performance and can bear the weight of 30KG. Glass shelf frame on both sides is made of food grade material, which is durable and safe. Meet /exceed OEM standard, each of them has been strictly tested.
- 【DA97-20647A Refrigerator Glass Shelf Compatible Part Number】Refrigerator Glass Shelf Replaces Part Numbers: DA97-20647A, AP6995361, PS16224585. Note: This DA97-20647A Glass Shelf for Samsung is installed on the Refrigerator section (Upper) of the Samsung refrigerator. Samsung Refrigerator Shelf does not fit the Freezer-Side, please verify your part number and size is correct for your model before ordering.
- 【DA97-20647A Refrigerator Glass Shelf Compatible Model Number】DA97-20647A Refrigerator Glass Shelf Replacement Replaces Model Numbers: RS28A5F61SG/AA, RS27T5202SR/AA, RS28A500ASR/AA, RS28A500ASG/AA, RS27T5200WW/AA, RS28A5F61SR/AA, RS27T5561SG/AA, RS27T5561SR/AA, RS27T5201SR/AA, RS27T5200SR/AA, RS27T5200SG/AA, RS27T5200SR/AA-00, RS27T5200SG/AA-00, RS27T5200WW/AA-00, RS27T5201SR/AA-00, RS27T5201SR/AA-01, RS27T5201SR/AA-02, RS27T5561SR/AA-00, RS27T5561SR/AA-01, RS27T5561SR/AA-02, RS27T5561SG/AA-00, RS28A500ASR/AA-00, RS28A500ASG/AA-00, RS28A5F61SR/AA-00, RS28A5F61SG/AA-00.
- 【 Food Grade Material 】DA97-20647A Refrigerator Glass Shelf is made of food grade material. Samsung Refrigerator Shelf has good corrosion resistance, is not susceptible to food debris, moisture and other substances erosion, but also provides additional storage space for the refrigerator, so that users can more effectively organize and sort storage of food and other items.
- 【Easy To Install】Easy to install the part yourself, just slide the DA97-20647A Glass Shelf in. One end has a lip, it goes in to the rear. Providing ample storage space for your keep fresh items, saves your time and money. If you are not sure whether the product is compatible with your refrigerator, please feel free to contact us, we will help you confirm it.
Rank #2
- Purchase Notes: Many replacement parts look the same with DA97-12935A door bin, but wont fit your model please check your model or check with us before you buy, Avoid buying mistakes, cause unnecessary trouble
- Premium Quality: DA97-12935A door shelf. We use high-quality, environmentally friendly materials to design, manufacture, Pollution-free, safe, hygienic and healthy, Easy to install, saving time and money, Please use it with confidence
- Part Number: DA97-12935A, AP5651846, PS5575404, EAP5575404, 3377713. This bin is for both the left and right side door. Ultra replacement door shelf basket bin for Samsung refrigerator
- Fits models: If your model number is not listed below it will NOT fit your refrigerator. RF220NCTABC/AA,RF220NCTASP/AA, RF220NCTASR/AA, RF220NCTAWW/AA, RF221NCTABC/AA, RF221NCTASP/AA, RF221NCTAWW/AA, RF220NCTASG/AA
- Quality After Sale: If the goods you receive are found to be damaged or other quality problems, please let me know. We will definitely give you a satisfactory answer.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.




