PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteThis rolling workbench doubles as a tablesaw outfeed table and is designed to store over the saw, using the same floor footprint. The sample build measures 61½ × 32⅛ × 39³⁄₁₆ inches with its casters down, but the plan calls for measuring your own saw and adapting the dimensions before you build.
What the plan is designed to do
WOOD Magazine describes the project as “a combination workbench and outfeed table.” When the bench is not in use, its intended storage position is over the tablesaw, helping a small shop or garage make better use of floor space. The plan is linked from WOOD Magazine’s project page; the downloadable plan identifies its copyright as 2007.
Sample dimensions and saw-fit checks
The published sample bench is 61½ inches wide × 32⅛ inches deep × 39³⁄₁₆ inches high with the casters down. These are dimensions for the example build, not a guarantee of fit with another saw. The example is based on a contractor-style saw with a 30-inch fence.
Before laying out the bench, measure the saw’s length, height and maximum width. Include the saw table, wings, extensions and rear fence rail in the width measurement. The plan’s positioning guidance is to allow one inch above the saw and one inch at each side when the bench is parked over it; it specifies no front-to-back clearance. Follow the plan’s instructions for removing the blade guard, rip fence and miter gauge before placing the bench over the saw.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
#1 Best Overall
- RACK AND PINION FENCE RAILS - Ensures fence stays parallel to blade for fast smooth, and accurate cuts
- INTEGRATED FOLDING STAND - Legs quickly fold in to provide portability and convenient storage
- PARALLEL BLADE ALIGNMENT - Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
- 4x4 CUTTING CAPACITY - Cuts material up to 4x4 at 90 degrees
- 2-47° BEVEL CAPACITY - Cuts between 2 positive stops at 0 and 45 degrees with quick release lever
How the rolling bench is equipped
The base uses four 4-inch swivel casters with brakes. Confirm that any casters you select have mounting plates and load ratings suitable for your finished bench; the cited plan passage does not give those specifications.
The worksurface is a ¾-inch plywood panel that can be flipped or replaced when it becomes worn. The parts list also includes maple, pine, laminated stock and birch plywood, along with flathead wood screws, levelers with T-nuts, bolts, washers, lock nuts, eyebolts, a steel bar and two ½-inch schedule 40 steel pipes. The plan calls for a stack dado set and ¾-inch round-over and 45-degree chamfer router bits.
Rank #2
- Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
- Patented material support, can be used for narrow rip cuts.
- 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials
- Onboard storage system provides easy access to the Blade Guard Assembly, fence, riving knife, miter gauge, wrenches, push stick, and cord wrap when not in use.
- Rolling stand designed for easy set up and breakdown with excellent stability of the portable table saw. Telescoping fence rails retract to create a small, portable package. Flip over ripping fence allows for narrow rip cuts
Get the plan and adapt it before cutting
- Open the WOOD Magazine project page and use its linked download to access the plan. The page listed the download when checked October 4, 2026, but access may change.
- Measure the saw, including its table, wings, extensions and rear fence rail. Compare those measurements with the plan’s stated one-inch overhead and side clearances and its zero front-to-back clearance.
- Customize the bench dimensions to your saw and shop layout before cutting stock. Check both its stored position over the saw and the working space needed when using it as a bench or outfeed support.
- Review the plan’s parts and hardware requirements, and verify the dimensions and load capacity of the casters and other purchased components for your build.
What to compare with other outfeed-table layouts
When evaluating a different design, compare how its dimensions fit your saw, how much floor space it occupies in use and storage, whether it serves as a general work surface, how it moves or locks in place, and what clearance it requires around the saw. Those are practical fit-and-layout questions; the project page does not report comparative performance testing of alternative designs.
Quick Recap
Best Value
- 2-1/2-INCH MAX. DEPTH OF CUT - Corded table saw delivers up to 2-1/2-inch maximum cutting depth at 0 degrees to cut up to 3x material in a single pass
- RACK AND PINION FENCE RAILS - For quick fence adjustments; system ensures fence stays parallel to blade for fast, smooth, accurate cuts
- EXPANSIVE RIP CAPACITY - Table saw delivers 24.5-inch blade right and 12-inch blade left rip capacity to easily rip down sheets of plywood and other sheet materials
- POWERFUL 15A MOTOR - Power for a range of applications like ripping down sheets of plywood, cross-cutting 2x4s for framing, cutting dado joints, and more
- COMPACT SIZE - Portable for easy transportation and storage
Rank #4
- Site-Pro Modular Guarding System allows for tool-free adjustments of the guarding
- 24.5 in. of rip capacity for ripping 4x8 plywood or OSB sheets
- Rack & pinion telescoping fence rails make fence adjustments fast, smooth, and accurate
- Compact size for easy transportation and storage
- Metal roll cage base for jobsite durability
Rank #3
- POWERFUL AND PRECISE: This 10-inch single bevel compound miter saw features a 15-Amp motor delivering high power for effortless cuts. The power saw generates a no-load speed up to 5,000 RPM, ensuring precise cuts for all your woodworking projects.
- USER-FRIENDLY DESIGN: The miter saw includes an improved miter scale and controls for accurate adjustments. Its large table saw 10 inch provides better material support, and the vice clamping system secures the workpiece for precision and safety.
- LIGHTWEIGHT AND PORTABLE: Weighing only 24 lbs, this second generation power saw is easy to maneuver and transport to any job site. The compact design allows for easy storage and increased portability without sacrificing power or performance.
- VERSATILE CUTTING CAPABILITIES: With a 0-52° miter angle range left and right and an adjustable bevel range of 0-45° left, this compound miter saw offers flexibility. Adjustable bevel stops ensure precision cuts for various woodworking applications.
- GO FOR THE METABO HPT EXPERIENCE: This durable miter saw comes with the Metabo HPT 5-year warranty. Choose our durable Japanese-engineered power tools to carry out all your professional-grade work, get more at the Metabo HPT store.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
