The Creality Falcon2 Pro is an enclosed blue-diode laser engraver and cutter available in 22W, 40W and 60W versions. It is a strong choice for supervised work on wood, plywood, leather, cardboard and suitable opaque acrylic, but it is not a substitute for a CO2 laser on clear acrylic or a fiber laser for serious bare-metal marking. The 40W model is the sensible middle ground for many buyers; choose the 22W for general engraving and moderate cutting, or the 60W when thicker stock and fewer cutting passes justify the extra cost and operating demands.
What is the Creality Falcon2 Pro?
The Falcon2 Pro is a desktop CNC-style laser machine: the laser head moves across a work area while a focused beam engraves or cuts the material below it. Unlike Creality’s open-frame Falcon2, the Pro integrates an enclosure, camera-based positioning and safety systems intended to make the machine easier to contain and supervise.
As an Amazon Associate I earn from qualifying purchases.
All three versions use a 455 ± 5 nm blue diode laser. The nominal optical-power choices are 22W, 40W and 60W. The 40W and 60W configurations may include a separate 1.6W module for finer engraving, depending on the exact regional bundle. Creality’s documentation hub and the relevant product listing should be checked before purchase because package contents vary.
It is better understood as an enclosed, high-power craft and small-production laser than as a “laser printer.” The beam can ignite material, produce smoke and damage the machine or its optics if unsuitable stock is used.
#1 Best Overall
- 【Ideal for Cutting Professional】-Newest Creality Falcon2 Pro integrated enclosure 60W laser engraver machine, with intelligent two adjustable beams, high output power, high containment safety, intelligent focus, accurate positioning, one key control, wide applicability characteristics. Based on the above, the laser cutter and engraver machine's speed to rapidly realize mass production is perfectly suited for professional players and sole traders.
- 【Native 60W Output & 500+mm/s Engraving Speed】-Creality Falcon2 Pro 60W laser engraver power up to 240000mW, works of utility upgraded again! It can cut through 0.2mm stainless steel, 22mm basswood, and 30mm black acrylic in a single pass. With engraving speeds exceeding 500mm/s, it enables high-efficiency batch production and significantly reduces processing time. The powerful laser system tackles projects that lower-powered machines cannot handle, helping bring your creative ideas to life with speed and precision.
- 【Built-in Camera with Intelligent Focus】-Creality Falcon2 Pro 60W laser engraver machine with practical large space batch automatic positioning function, built-in a camera above the center of the product in the shield, USB connected to the computer, preview into the picture intuitive and efficient, significantly improve the success rate of creation. Compared with others, users no longer need to manually measure the distance between different works, and can be operated intelligently with one key!
- 【Class 1 Certified & Several Security Protections】-Creality Falcon2 Pro 60W laser engraver is equipped with a flame detector, dual wire limit switch, safety lock, emergency stop button, and laser detection cover five safety features. In addition, Transparent design, a full metal frame, fully enclosed structure, covered with fireproof fiber cover, to isolate smoke, dust and noise during the creation process, allowing you to devote yourself to your work!
- 【10 Min Quick Install & Easy cleaning】-Falcon2 pro 60W laser engraver machine is shipped in an over unit (80% assembled), you only need to spend 10 minutes or less to install and test the machine when you receive it. The bottom of the drawer is designed to organize the debris during the creation process. After the creation process is finished, you only need to pull out the drawer and pour out the debris, making the cleaning very convenient and less frequent, which is perfect for small studios.
Falcon2 Pro 22W vs. 40W vs. 60W
| Feature | 22W | 40W | 60W |
|---|---|---|---|
| Laser type | Blue diode | Blue diode | Blue diode |
| Nominal optical power | 22W | 40W | 60W |
| Nominal work area | 400 × 415 mm | 400 × 415 mm | 400 × 400 mm according to Creality’s FAQ |
| 1.6W detail module | Generally not included | Included with relevant bundles | Included with relevant bundles |
| Best suited to | Engraving and moderate cutting | Faster, deeper cutting with a detail option | Maximum cutting capacity in the family |
| Main compromise | More cutting passes | Higher cost and heat load | Highest cost and material-management demands |
Creality’s published dimensions are approximately 664 × 570 × 328.4 mm. Listed approximate weights are 18.04 kg for the 22W, 18.56 kg for the 40W and 18.87 kg for the 60W. The documentation specifies 100–240V, 50–60Hz input compatibility and a recommended operating temperature of 5°C–35°C. Allow additional room for exhaust tubing, air-assist equipment, loading material and cleaning.
Because Creality’s FAQ and some product pages differ on the 60W bed dimension, confirm the exact specification for the regional model you are buying rather than assuming every Falcon2 Pro has the same workspace.
Which version should you buy?
- Choose the 22W if your work is mainly engraving, thin wood, leather, cardboard and other moderate cutting. It is the lowest-power entry point and makes sense when speed is secondary.
- Choose the 40W if thicker wood or plywood, faster production and a balance between price and cutting power matter. It is the most broadly sensible option for many makers and small businesses.
- Choose the 60W if maximum diode cutting power is the priority and you accept higher cost, more demanding ventilation, greater heat and more testing. It remains a blue-diode machine, not a 60W CO2 laser.
What can the Falcon2 Pro engrave and cut?
Creality lists cardboard, wood, bamboo, rubber, leather, fabric, acrylic and plastic among the compatible material categories. That list needs interpretation: a material category is not a guarantee that every product within it is safe or suitable.
Good starting materials
Wood, plywood, paperboard, leather and dark or opaque acrylic are the most obvious use cases. Blue diode light is absorbed more effectively by dark surfaces than by transparent ones, so black, colored or coated acrylic is generally more practical than clear acrylic.
Materials requiring caution
“Plastic” is too broad to be a safe instruction. Different plastics melt, ignite or release hazardous gases. Do not process PVC, vinyl or unknown plastic. Identify the exact material and consult its safety data before lasering it.
Transparent acrylic is a poor match for a blue diode because much of the light can pass through it. If clear-acrylic cutting is a primary requirement, a CO2 laser is usually the more appropriate technology.
Rank #2
- Commercial-Grade 60W Power: Built for serious makers, workshops and growing businesses, the Falcon2 Pro 60W delivers exceptional cutting power and high-speed engraving for wood, acrylic, leather and more, helping you complete demanding projects faster with professional-quality results.
- 3-Level Adjustable Power (60W/40W/22W): Switch seamlessly between 60W, 40W and 22W laser output to match different materials and applications. Maximize cutting performance with full power or reduce output for finer engraving, greater precision and less material scorching—all with one machine.
- 60W + 1.6W Dual Laser System: The powerful 60W laser handles heavy-duty cutting and engraving, while the integrated 1.6W laser enables precise positioning and fine engraving. Together they deliver greater flexibility, improved accuracy and a smoother workflow across a wide range of projects.
- Fully Enclosed Class 1 Safety: Work confidently with a fully enclosed Class 1 design that minimizes laser exposure while improving smoke containment. Features including a protective viewing window, emergency stop and intelligent safety monitoring help create a safer workspace.
- Professional HD Camera Workflow: The built-in HD camera provides accurate material positioning, live preview and batch engraving alignment, reducing setup time while improving production efficiency and engraving consistency.
Bare reflective metals are not normal cutting targets for the Falcon2 Pro. Painted, anodized, coated or marking-compound-treated metal may be markable under suitable conditions, but that is different from directly engraving or cutting bare steel or aluminum. Treat claims about metal carefully: a manufacturer reference to a thin stainless-steel result does not make the machine a general-purpose metal cutter.
Recommended Free Tools
How powerful is the 60W version in practice?
Creality’s Canadian 60W listing advertises cutting up to 22 mm basswood and 0.2 mm stainless steel in one pass under stated conditions. These are manufacturer claims, not universal results. The stainless-steel reference should not be interpreted as ordinary deep cutting of bare metal.
Actual results depend on optical power, material species, density, thickness, moisture, focus, flatness, air assist, speed, power, passes, lens cleanliness, ventilation and ambient conditions. Even a high-power model may need multiple passes for production-quality cuts, and a maximum-depth cut may have more charring or a less desirable edge than a slower, shallower job.
Separate three expectations:
- Maximum claim: a published result achieved under particular conditions.
- Beginner expectation: straightforward engraving and cutting of thin, known materials after testing.
- Production expectation: repeatable results established through a material library, consistent stock, clean optics, reliable airflow and regular inspection.
There is no universal best setting. Build a test grid for every new material and thickness, varying speed, power and passes before committing valuable stock.
Enclosure, camera and air assist
Enclosure
The enclosure helps contain the beam and smoke and makes the Falcon2 Pro easier to supervise than an open-frame engraver. It does not eliminate fire risk, toxic emissions or the need for ventilation.
Creality identifies the machine as Class 1 under FDA classification in relevant documentation and commercial material. That classification applies to the intended enclosed configuration. The manual warns that radiation at the aperture can exceed Class 1 if enclosure assumptions are defeated or the machine is altered.
Rank #3
- 【Ideal for Professional Cutting – 2025 Upgraded Falcon2 Pro S】The 2025 newest Creality Falcon2 Pro S 22W laser engraver features a fully integrated enclosure, enhanced safety containment, Z-Axis Auto Focus, Auto Cut Through path compensation, precise camera positioning, and one-key intelligent control. Designed for high efficiency and wide material compatibility, it is perfectly suited for professional makers, small studios, and sole traders seeking reliable batch production.
- 【22W Output & 600mm/s High-Speed Cutting】Falcon2 Pro S laser engraver delivers a powerful 22W optical output (Class 1, up to 120000mW machine power), capable of one-pass cutting 15mm basswood, 10mm black acrylic, and even 0.1mm thin metal sheets. With an upgraded cutting speed of up to 500mm/s, it enables true high-speed batch processing that lower-power machines simply can’t achieve.
- 【Built-in Camera with Intelligent Auto Focus】Creality 22W laser engraver and cutter machine with practical large space batch automatic positioning function, built-in a camera above the center of the product in the shield, USB connected to the computer, preview into the picture intuitive and efficient, significantly improve the success rate of creation. Compared with others, users no longer need to manually measure the distance between different works, and can be operated intelligently with one key!
- 【Class 1 Certified &Several Security Protections】-Creality Falcon2 Pro S 22W laser engraver for wood and metal is equipped with a flame detector, dual wire limit switch, safety lock, emergency stop button, and laser detection cover five safety features. In addition, Transparent design, a full metal frame, fully enclosed structure, covered with fireproof fiber cover, to isolate smoke, dust and noise during the creation process, allowing you to devote yourself to your work!
- 【10-Minute Setup & Easy Cleaning Design】Shipped 80% pre-assembled, the Falcon2 Pro S can be installed and tested in 10 minutes or less. A built-in debris drawer collects cutting residue during operation, simply pull it out and empty after use, reducing cleaning frequency and making it ideal for compact workshops and small studios.
Camera positioning
The built-in camera is useful for aligning artwork to an existing object, placing designs on scraps or irregular stock and reducing material waste. The 60W product page describes a 360° visual-positioning camera covering the workspace.
Camera positioning is not an automatic precision guarantee. Calibration, perspective, reflections, lighting and material placement can introduce errors. Warped or moving stock can defeat even a correctly calibrated camera. Use the camera to position the job, then perform a frame or low-power outline check before engraving.
Camera menus and workflows can differ between Falcon Design Space, LightBurn and LaserGRBL, as well as between firmware versions. Follow the instructions for the selected software rather than assuming their labels are identical.
The Tool Desk
Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Air assist and exhaust
Air assist is a core operating component, not merely a performance accessory. It helps clear smoke from the cut, reduce flare-ups, improve edge quality and limit soot on the workpiece. Exhaust performs a different job: it removes contaminated air from the enclosure. Filtration recirculates air through a purifier and depends on suitable, maintained filters; it does not make every emission harmless.
Connect the supplied silicone tube to the laser module as directed to reduce lens contamination. Smoke buildup, inadequate airflow and dirty optics can all reduce cutting performance.
Software: Creality, LightBurn or LaserGRBL?
The documented software options include LightBurn, LaserGRBL and Creality’s own software ecosystem, including Falcon Design Space on relevant product pages. Windows and macOS are supported in the official documentation, with common formats including JPEG, JPG, PNG, BMP, SVG and DXF.
Rank #4
- 【Ideal for Professional Cutting –Upgraded Falcon2 Pro S】The newest Creality Falcon2 Pro S 40W laser engraver features a fully integrated enclosure, enhanced safety containment, Z-Axis Auto Focus, Auto Cut Through path compensation, precise camera positioning, and one-key intelligent control. Designed for high efficiency and wide material compatibility, it is perfectly suited for professional makers, small studios, and sole traders seeking reliable batch production.
- 【40W Output & 600mm/s High-Speed Cutting】Falcon2 Pro S laser engraver delivers a powerful 40W optical output (Class 1, up to 240000mW machine power), capable of one-pass cutting 20mm basswood, 30mm black acrylic, and even 0.1mm thin metal sheets. With an upgraded cutting speed, it enables true high-speed batch processing that lower-power machines simply can’t achieve.
- 【Built-in Camera with Intelligent Auto Focus】This creality falcon 40W laser engraver and cutter machine with practical large space batch automatic positioning function, built-in a camera above the center of the product in the shield, USB connected to the computer, preview into the picture intuitive and efficient, significantly improve the success rate of creation. Compared with others, users no longer need to manually measure the distance between different works, and can be operated intelligently with one key!
- 【Class 1 Certified & Several Security Protections】Creality Falcon2 Pro S 40W laser engraver is equipped with a flame detector, dual wire limit switch, safety lock, emergency stop button, and laser detection cover five safety features. In addition, Transparent design, a full metal frame, fully enclosed structure, covered with fireproof fiber cover, to isolate smoke, dust and noise during the creation process, allowing you to devote yourself to your work!
- 【10-Minute Setup & Easy Cleaning Design】Shipped 80% pre-assembled, the Falcon2 Pro S can be installed and tested in 10 minutes or less. A built-in debris drawer collects cutting residue during operation, simply pull it out and empty after use, reducing cleaning frequency and making it ideal for compact workshops and small studios.
- LightBurn: the strongest choice for complex layouts, vector preparation, material libraries, camera workflows and repeat production. It is paid software, and current licensing should be checked directly with LightBurn.
- LaserGRBL: a lower-cost or free starting point for many jobs, but generally less polished for complex layout and camera-assisted production.
- Creality software: potentially approachable for beginners and first-party support, but verify the current release’s operating-system support and camera features.
Before buying, confirm the exact machine profile, firmware compatibility and camera workflow for the software you intend to use.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchSetup and first project
- Assemble the machine according to the instructions for the exact 22W, 40W or 60W model.
- Place it on a stable surface with room for ventilation, loading and maintenance.
- Install the chosen software and connect the machine.
- Complete activation, firmware or device-setup steps if requested.
- Import or create the artwork.
- Set the material, focus, speed, power, passes and air assist.
- Run a material-test grid rather than relying on a generic online setting.
- Use the camera and then frame the job or run a low-power outline to verify placement.
- Start the job while remaining present.
- Stop immediately for flame, abnormal movement, smoke buildup or an alarm.
- Let the workpiece and machine cool before removal, then clean residue and inspect the lens and tray.
Safety: what Class 1 does and does not mean
Do not operate the Falcon2 Pro unattended. Keep the enclosure intact, never bypass interlocks or sensors, do not look directly at the beam and do not touch the moving system or laser module during operation. Keep the work area free of debris and have an appropriate fire extinguisher available.
Vent smoke outdoors through a properly designed system or use suitable filtration. The enclosure does not make unknown materials safe. Inspect the work continuously for flame or flare-ups.
Removing the bottom tray, raising the machine for oversized work or installing a rotary attachment can introduce laser-light leakage. Creality’s compatibility table should be checked for the exact model and accessory. Such a setup is not simply the same as ordinary enclosed flat-stock operation.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Maintenance
With the machine powered off:
- Clean the laser module and machine body with an anti-static brush or dry cloth as directed.
- Inspect and clean the lens, camera lens, tray and surrounding surfaces.
- Remove debris and check the air-assist tubing and airflow path.
- Inspect cables, connectors, enclosure panels and safety sensors.
- Look for smoke buildup or residue inside the enclosure.
- Keep software and firmware compatible with the selected workflow.
- Run a test cut after maintenance, a module change or any setup that could affect focus or alignment.
Never connect or disconnect the laser module while powered on.
Free tools Windows power users keep installed
One-click scans. No signup required.
Common problems and recovery
Flame or flare-up
Stop the job immediately. Keep the enclosure closed unless emergency intervention requires otherwise. If safe, disconnect power and use an appropriate extinguisher if the flame does not go out. Do not restart until the material, tray, lens and airflow path have been inspected. Common causes include excessive power, low speed, contaminated or resinous wood, poor air assist, debris and unsuitable material.
Best Value
- 【FDA Safety】With a 360° visual enclosed design, the Falcon2 Pro S laser engraving machine not only giving you a clean and quiet working environment, but also allowing you observe the processing from any angle and protact your eyes from laser radiation. The Laser Class 1, Laser Output Level: 22000mW
- 【Smart Auto Focus】Smart Auto Focus: One-click auto-focus instantly adjusts to the optimal height for any material, ensuring sharp, precise results without manual effort—ideal for smooth, efficient engraving every time.
- 【Powerful & High Speed Engraving】Falon2 Pro S 22w laser engraver enables rapid engraving and cutting of materials like 15mm basswood, 10mm black acrylic, and 0.1mm thin metal in a single pass, with speeds up to 25,000mm/min for enhanced efficiency
- 【Falcon Design Space】Falcon Design Space is easy to use, free, and powerful, and the Falcon2 Pro S also can be used with popular engraving software such as LaserGRBL and LightBurn. It supports Windows and Mac OS systems.
- 【Pilot Technology with Precise Positioning】Falcon 2 Pro S laser cutter has a built-in top camera with pilot technology & visual assistance for accurate alignment and full-frame functionality. Support real-time preview and one click picture output, effortlessly handles various shapes objects engraving or batch processing.
Poor cutting despite high power
Check focus, material flatness, lens contamination, tubing, material density, speed, pass count and the selected optical-power mode. The material may simply absorb 455 nm light poorly; do not assume the laser module has failed.
Sooty or smoky edges
Possible causes include insufficient air assist, excessive power, low speed, poor exhaust or unsuitable material. Clean the optics and run a test matrix before changing hardware.
Camera alignment errors
Clean the camera lens, confirm the correct workspace dimensions, recalibrate if necessary, flatten the material and frame the design. Reflections and unusual lighting can distort the view.
Unexpected movement or alarm
Creality’s FAQ describes a protective response in which abnormal movement can turn off the laser, stop the motors, blink the indicator and sound the buzzer rapidly. Stop the job and check for obstructions, tray placement, cable problems, enclosure sensors and the software connection before restarting.
Alternatives by technology
| Technology | Best for | Trade-off |
|---|---|---|
| Open-frame diode | Lower-cost entry and oversized stock | More exposure, smoke and shielding responsibility |
| Hybrid diode/IR | Blue-diode work plus more flexible metal marking | May have a smaller work area or higher cost |
| CO2 | Clear acrylic, thicker acrylic and stronger general cutting | More space, ventilation, maintenance and infrastructure |
| Fiber | Direct metal marking and engraving | Poor fit for ordinary wood-and-craft work and usually much more expensive |
Choose a CO2 system if clear acrylic, deep cutting or throughput dominates your requirements. Choose a hybrid diode/IR system if metal marking is important and a smaller bed is acceptable. Choose fiber when metal is the primary workpiece.
Buying checklist
- Identify the exact optical-power variant and regional bundle.
- Confirm whether the 1.6W module is included.
- Verify the model-specific work area, especially for the 60W version.
- Budget for air assist, exhaust or filtration, a suitable work surface, materials and fire-safety equipment.
- Confirm your computer’s operating-system compatibility and preferred software.
- Provide a stable workspace larger than the machine footprint.
- Verify rotary-accessory compatibility before buying it.
- Do not choose the Falcon2 Pro if you primarily need clear-acrylic cutting, direct deep metal work, unattended production or a large pass-through bed.
Verdict
The Falcon2 Pro is a capable enclosed diode platform for makers, sign businesses and small-batch producers who mainly work with wood, plywood, leather, cardboard and suitable opaque acrylic. Its enclosure and camera improve the workflow, but they do not replace ventilation, material testing, fire monitoring or operator supervision.
The 40W Falcon2 Pro is the rational default for buyers who want a balance of cutting power and cost. The 22W is sufficient for engraving and moderate cutting, while the 60W is for buyers who genuinely need the family’s maximum diode cutting capacity and understand its limitations. None of these versions should be judged as a CO2 or fiber-laser replacement.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
