Gas may power a home’s furnace or boiler, water heater, range or cooktop, oven, clothes dryer, fireplace, or space heater. These are possibilities, not a checklist of appliances that are gas-fired in every home: fuel and setup vary by building and by appliance. Check the unit’s label or manual, or ask the landlord or installer, to confirm what a specific appliance uses.
Which home appliances might use gas?
Natural gas or propane can fuel appliances for heating, hot water, cooking, laundry, and supplemental heat. Some homes also receive heating or hot water from shared building equipment, so an apartment may use gas even if there is no gas appliance inside the unit.
As an Amazon Associate I earn from qualifying purchases.
Furnaces, boilers, and space heaters
A furnace or boiler may burn natural gas or propane to heat the home. Gas-fired space heaters and some wall heaters can provide heat in a room or smaller area. The fuel and venting arrangement depend on the specific unit.
Water heaters
A water heater may be gas- or propane-fired. Some units use natural-draft venting; others use powered or direct venting. A shared building system may heat water for multiple apartments.
#1 Best Overall
- Electrochemical sensor technology detects CO gas
- Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included); Install on a wall of your home or place on a tabletop
- Green LED indicates power to the carbon monoxide detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide
- Event Memory records the last time carbon monoxide was detected or when the unit was last tested
Ranges, cooktops, and ovens
Gas ranges and cooktops burn fuel for cooking, and ovens can also be gas-fired. Configurations differ: a range may have a gas cooktop and an electric oven. Appearance alone does not confirm the fuel for every part of an appliance.
Clothes dryers
Some clothes dryers use gas; others use a different energy source. Check the appliance label or manual rather than assuming the fuel from the dryer’s location or appearance.
Rank #2
- Keep your family safe with this easy to use plug in carbon monoxide alarm; It works with any standard outlet and also has a battery backup for continuous monitoring of Carbon Monoxide levels, even if there's a power failure
- Features an advanced electrochemical carbon monoxide sensor that accurately detects carbon monoxide levels, no matter where the detector is placed in the room
- Simple to use, with a single test/silence button; a loud 85 decibel alarm sounds when Carbon Monoxide levels reach dangerous levels. Low battery signal mute, quiets low battery signal for upto 8 hours
- To ensure complete protection make sure to place one on each level of your home and in each bedroom
- 7 year limited warranty; Equipped with end of life signal chirp, so you know when it’s time to replace the unit for safety
Fireplaces
A fireplace may use gas or propane, but fireplaces can also use other fuels. Confirm the fuel from the unit’s label or documentation.
Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problemsHow can you tell whether a particular appliance uses gas?
- Read the appliance label. Look for the fuel type on the unit’s rating plate or identification label.
- Check the manual. The manufacturer’s documentation identifies the intended fuel and may explain the venting arrangement.
- Ask the landlord, installer, or building manager. This is especially useful in apartments, where heating or hot water may come from shared equipment rather than an appliance in the unit.
Do not rely on a general list of gas-capable appliances to identify a specific unit. Fuel configuration varies, and the sources available do not establish how common each setup is in apartments or houses.
Rank #3
- Easy Installation - simply plug-in to a standard, 120V outlet in your home
- 2-AA battery backup provides protection during a power outage
- 85-decibel alarm announces when carbon monoxide is detected
- Peak Level Memory records the last time carbon monoxide was detected or when the unit was last tested
- Test-Hush Button makes testing the detector or silencing false alarms easy
Why venting and carbon monoxide safety matter
Fuel-burning appliances need correct installation and exhaust venting. The U.S. Department of Energy notes that combustion exhaust can include carbon monoxide, water vapor, and nitrogen oxides; a faulty appliance, leaking flue, or backdraft can bring combustion products indoors. A direct-vent sealed-combustion appliance draws air from outside and sends exhaust outside, reducing backdrafting risk.
The U.S. Fire Administration describes carbon monoxide (CO) as colorless and odorless. It recommends installing and maintaining CO alarms inside the home, outside each separate sleeping area, and on every level. Follow alarm instructions and applicable local guidance for placement. An alarm is not a substitute for safe installation, maintenance, or repair.
Rank #4
- Electrochemical sensor technology detects CO gas
- Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included)
- Conveniently designed & portable: simple to install on a wall of your home or place on a tabletop
- Green LED indicates power to the smoke detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide
- Peak Level Memory records the last time carbon monoxide was detected or when the unit was last tested
- Keep dryer, furnace, stove, and fireplace exhaust vents clear of snow and debris.
- Have suspected venting or appliance problems assessed by a qualified local professional.
The ENERGY STAR guidance cited for certified homes calls for measures such as power or direct venting, lower-risk placement, or testing for proper operation for certain combustion appliances. That is a requirement for its certified-home program, not a universal statement of local building codes.
Quick Recap
Best Value
- Keep your family safe with this easy to use, battery operated carbon monoxide alarm; Battery powered alarms provide continuous monitoring of CO levels, even if there's a power failure
- Features an advanced electrochemical carbon monoxide sensor that accurately detects carbon monoxide levels, no matter where the detector is placed in the room.The alarm sequence should last 5-6 seconds. If it does not alarm, make sure fresh batteries are correctly installed, and test it again. If the unit still does not alarm, replace it immediately
- A loud 85 decibel alarm sounds when CO levels reach dangerous , Battery Replaceable - Yes
- To ensure complete protection make sure to place one on each level of your home and in each bedroom
- 5-year limited warranty; Equipped with end of life signal chirp, so you know when it’s time to replace the unit for safety
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
