Recommended Free Tools
If your Trane furnace will not start, blows cool air, cycles repeatedly, or enters lockout, begin with the thermostat, power, and air filter. These homeowner checks can resolve simple issues; ignition, gas, electrical, venting, and safety-control faults require a qualified HVAC technician. If a carbon monoxide alarm sounds or you smell strong, persistent gas, leave the home and call for emergency help from outside.
Before troubleshooting: know when to leave
If a carbon monoxide alarm sounds
Go outside to fresh air immediately, call emergency services, and do not reenter until responders say it is safe. Do not use the furnace again until trained personnel have inspected it. The U.S. Consumer Product Safety Commission (CPSC) says, “Never ignore an alarming CO alarm!” CPSC carbon monoxide questions and answers.
If you smell gas
A strong, persistent gas odor is a reason to leave immediately. Do not operate switches or try to find the leak while inside. Once you are at a safe location, contact emergency services and follow their instructions. Trane’s furnace troubleshooting guidance.
Start with three homeowner checks
- Thermostat: Set the mode to Heat and raise the setpoint above the room temperature. If the thermostat uses batteries, check them and replace them if needed. For a furnace that runs but does not heat, set the fan to Auto rather than On.
- Power: Check that the furnace switch is on and inspect the home’s circuit breaker. If the breaker trips again, do not keep resetting it; arrange professional service.
- Air filter and airflow: Check whether the filter is dirty and whether return-air vents are blocked. If replacing the filter, use the size and type specified for your furnace or shown on the existing filter. Trane describes 30–90 days (about 1–3 months) as a typical filter replacement range, with the interval varying by filter quality and conditions; it is not a universal schedule. Trane filter guidance.
Furnace error codes, filter dimensions, and compatible parts vary by model. Use the owner’s manual for your unit and the thermostat manual for thermostat codes; do not infer a diagnosis from a general code list.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →#1 Best Overall
- Important Note: Qty on the Envoriwise box says 1 but it means 1 pack of 2. The label also does not have the complete size on the outer box and is printed as 22.7x20x4.7 , but it is printed correctly as 22.7x20.7x4.7 on the air filter.
If the furnace will not turn on
Check the thermostat mode and setpoint, batteries if applicable, furnace switch, and circuit breaker. If the furnace remains off after those checks—or the breaker trips again—contact an HVAC professional rather than opening the unit or attempting electrical repairs. Trane guidance for a furnace that will not turn on.
If it clicks or tries to ignite but does not light
Thermostat settings, power, a dirty filter, or gas supply can be involved, but clicking or repeated ignition attempts can also point to a fault that needs diagnosis. Trane describes the flame sensor as “a safety device that detects a flame”: when it does not detect flame, it signals the control board to stop gas flow. Do not attempt to clean or replace the ignitor or flame sensor based on a general troubleshooting guide. Have a qualified technician inspect ignition and gas-related faults. Trane ignition troubleshooting.
Rank #2
- Atomic Compatible is made to fit Trane FLRQB5AH23M11 Envirowise Quikbox Cabinet EQBFM235A0AH11
- Size: 22.7x20.7x4.7 inch filters
- 2 Filters - No Assembly Required
- MERV 11
- Made in USA
If the furnace runs but blows cool air
Confirm that the thermostat is set to Heat and that its fan setting is Auto, not On; the On setting can circulate air even when the furnace is not heating. Inspect the filter and replace it if dirty, using the correct size and type. If the furnace still blows cool air, a technician may need to assess airflow, ignition, flame sensing, or another system fault. Trane guidance for a furnace not blowing hot air.
If it starts and stops repeatedly or enters lockout
A restricted filter or airflow problem can contribute to overheating and shutdown. Repeated cycling or lockout can also involve ignition, fuel, venting, burners, controls, or safety switches. Replace a dirty filter if appropriate, but do not repeatedly reset the furnace or bypass a safety control. A hard lockout needs professional diagnosis and repair; contact an HVAC technician if the problem continues. Trane lockout guidance and Trane short-cycling guidance.
Rank #3
- Perfectly Compatible：Our FLRQB5AH23M11 Merv 13 filter measures 22.7" x 20.7" x 4.7" and is perfectly compatible with Trane 22.7 x 20 x 4.7 / 23x20x5 FLRQB5AH23M11 QwikBox EnviroWise Filters FLRQB5AH FLRQB5AH23 ,TFM235B0AH0, EQBFM235A0AH11 and other 22.7 x 20 x 4.7 inch air filter.
- MERV 13 Efficient Filtration：The FLRQB5AH23M13 MERV 13 air filter for Trane adopting advanced filtration technology, the filtration performance is upgraded to a MERV 13 ,which can efficiently 𝖿𝗂𝗅𝗍𝖾𝗋 𝗈𝗎𝗍 𝟫𝟫.𝟫𝟩% 𝗈𝖿 𝗉𝖺𝗋𝗍𝗂𝖼𝗅𝖾𝗌 𝖺𝗌 𝗌𝗆𝖺𝗅𝗅 𝖺𝗌 𝟢.𝟥 𝗆𝗂𝖼𝗋𝗈𝗇𝗌，𝗉𝗋𝗈𝗏𝗂𝖽𝗂𝗇𝗀 your family with fresher air
- Higher Quality:Our 22.7x20.7x4.7 air filter for trane is made of high-quality materials according to OEM American original production standards.Besides,the FLRQB5AH23M11 Merv 13 filter lasts up to 6-12 months, providing you and your family with a higher level of fresh indoor air !
- Easy Installation: The FLRQB5AH23M13 22.7"x20"x4.70 merv 13 filter is easy to install and replace.All you need to do is open the 22.7x20.7x4.7 merv 13 air filter up on the outside and put the pleats in the frame and snap the clips in place, and you can easily enjoy a higher quality of life in just 2 minutes! In addition, our detail page has a detailed description for your reference.
- Sincere ：You will receive 2 packs 22.7x20.7x4.7 filter for trane FLRQB5AH23M11 air filter . In addition , if any questions about the FLRQB5AH23M11 merv 13 filter we will immediately to help you out.
If the blower behaves oddly
A fan setting of On can keep the blower running without heat; switching it to Auto is a reasonable first check. Also inspect the filter and make sure return vents are not blocked. If the blower still behaves abnormally or the furnace cycles repeatedly, have a professional check for a switch, motor, control-board, or other fault rather than attempting component repairs. Trane blower troubleshooting.
Quick Recap
Best Value
- Remarkable Filtration: Our MERV 11 (comparable to MPR 1000 - MPR 1200 & FPR 7) rating ensures that this 17.5x27x5 air filter effectively captures dust, pollen, pet dander, and other airborne particles, providing you with cleaner and healthier indoor air.
- Perfect Fit: Specifically designed to fit Trane BAYFTFR17M, BAYFTFR17M2, FLR06069, FLRQB5FR17M11, TRN1727T1, HTRN1727T1, this 17.5x27x5 furnace filter is a reliable replacement that maintains the integrity of your HVAC system.
- Longer Lifespan: With a durable construction, our 17.5x27x5 filter is built to withstand regular use and maintain its efficiency for up to 12 months, saving you both time and money.
- Enhanced Airflow: The advanced design of this 17.5x27x5 AC filter ensures optimal airflow throughout your home, promoting efficient cooling and heating performance while keeping energy costs in check.
- Easy Installation: Our 17.5x27x5 HVAC filter is user-friendly and hassle-free to install. Simply replace your old filter with this high-performance option and enjoy cleaner and fresher air in no time.
Rank #4
- FLRQB5FR17M11 Compatibility: The FLRQB5FR17M11 Merv13 Air Filter actual size is 16.7 x 26 x 4.7 inch, which can compatible with Trane FLRQB5FR17M11 TFM175B0FR0 FLRQB5FR17M13 air filter, for QwikBox EnviroWise filters FLRQB5FR FLRQB5FR17 DTRFLRQB5FR17M11 FLRQB5FR17M11 furnace filter
- Upgraded Merv 13 Filter: The FLRQB5FR17M11 16.7 x 26 x 4.7 MERV 13 filter is a expandable filter.The FLRQB5FR17M11 furnace filter has upgraded its filter paper material from the original Merv 11 filter to Merv 13 filter, increasing the filtration area and improving the filtration effect. FLRQB5FR17M11 can filter up to 95% of smaller and more impurities
- Upgraded design: FLRQB5FR17M11 furnace filter 2 units adopt a foldable design, occupying small space and can be stored at any time. The shell adopts a diamond design to fix the product, and the filter paper is wrapped with steel wire to increase stability and folding effect, thereby improving the service life of the product. Our FLRQB5FR17M11 filter can be used for up to 6 months
- Easy to install: FLRQB5FR17M11 16.7 x 26 x 4.7 filters are two sets of FR filters, not AH filters. The FLRQB5FR17M11 filter compatible with Trane does not require assembly and can be directly removed from the particleboard frame. The FLRQB5FR furnace filter can then be placed in a QuikBox filter cabinet of the same size
- Package List: After you receive 2 FLRQB5FR17M11 merv 13 filters measuring 16.7 x 26 x 4.7, if you have any questions, we will do our best to help you solve the problem. We hope our products can bring you fresher air
Preventive safety and maintenance
- Install carbon monoxide alarms on every level of the home and outside sleeping areas. CPSC advises using alarms with battery backup or battery power and testing them monthly. Follow the alarm manufacturer’s placement and operating instructions. CPSC carbon monoxide alarm guidance.
- Have heating systems, including vents, inspected and serviced annually by a trained technician, as CPSC recommends. CPSC heating-system service guidance.
- Use the furnace manual for model-specific filter and maintenance requirements; a general replacement interval cannot account for every filter, home, or operating condition.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
