Free tools Windows power users keep installed
One-click scans. No signup required.
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
The right TV cord cover is the one that fits your cable bundle and the full route, suits your wall surface, and can be finished to blend into the room. Measure before choosing: an on-wall raceway hides cords from view, but it is not a substitute for an in-wall wiring method.
How to choose a cord cover for a wall-mounted TV
Start with the actual installation, not a product label. A short, straight run may need only a simple channel; a route that turns around a TV or follows a longer section of wall may need corner fittings or additional sections. Compare the cover’s usable dimensions with the cords you intend to route, and check that the kit includes fittings for the turns in your path.
- Measure the route: Trace the path from the TV to the outlet or other endpoint, including vertical and horizontal sections and any corners. Choose a kit that covers the route; if a channel can be cut, follow its product instructions.
- Check cable capacity: Count and measure the cables that need to fit inside. Products designed for one cord may not accommodate a bundle.
- Match the mounting method to the wall: Adhesive installation depends on a suitable, prepared surface. Uneven walls or heavier cable loads may call for screw mounting, if the product supports it.
- Plan the finish and future access: Paintability can help a cover blend in, while a channel that opens readily may be useful if you expect to add or change cables.
- Confirm the intended use: An on-wall cover conceals and protects cords on the surface. It should not be treated as a method for running building wiring inside a wall.
On-wall cord cover examples
These products illustrate different use cases described by Legrand. The available product information does not establish comparative quality or support a tested “best overall” choice.
| Product | What the manufacturer says | What to check for your setup |
|---|---|---|
| Wiremold C30 48-inch Flat Screen TV Cord Cover Kit | Legrand describes the C30 as a paintable, on-wall TV cord cover. Its page lists a 48-inch length and says the channel can be cut to fit. Legrand says it is intended to protect electrical cords and low-voltage wiring and cabling, and that it is not NRTL listed. Legrand product page | Measure the complete route, verify the cable bundle fits, and confirm the supplied fittings suit the corners in your path. |
| Wiremold CordMate II CMK50 | Legrand describes this as an adhesive-backed, paintable on-wall kit for multiple low-voltage cords, wires, and cables. Its product-page Q&A says the kit contains four 30-inch sections and fittings; listed straight-section dimensions are 1 inch by 1/2 inch. Legrand product page | Compare the listed section dimensions with your cable bundle and route. Check that the wall surface is suitable for adhesive mounting. |
These are sourced examples, not hands-on recommendations. Current retailer prices and availability are not established here.
Recommended Free Tools
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Yecaye TV Cord Hider, 42in Cord Cover Wall Mounted, W1.18in H0.6in, White
- Bye bye messy TV wires! Hung your TV up but the HDMI and Internet cords are dangling down. The clutter of wires is really hard to look at. The wires are directly exposed and inadvertent touch can be easily tangled with the cords, a potential electrical hazard. Don't want something bulky and not in a position to put the wires behind the wall, so the Yecaye TV cord hider is a good option
- Good for length for TV walls! Whether you have a high or low hanging wall mounted TV, the Yecaye CMC02 cord hider will work well for your wall mounted TV hidden wire needs. You can use three cable raceways separately or directly splice three cable raceways together seamlessly
- Easy to use in tight spaces! Yecaye TV cord hider is designed to be more suitable for flexible and comfortable installation or cable change under the TV or other small spaces. It namely can slide on or snap on directly so as to choose a comfortable way to complete the cord cover wall installation in different installation spaces
- Large capacity for 3-4 wires! Our cable hider can hold 3-4 wires depending on most TV wire sizes and number of wires. Our cord cover is suitable for hiding various wires under TV, such as HDMI cable, TV power cable, Ethernet cable. The cable hider internal length is 1.1in and internal width is 0.52in. Please measure the number of wires you need to hide first when choosing our cord covers
- Easy tool-free use! It's so easy to use TV cord hider to install. Pre-adhesive tape is applied and installation is completed with just one peel and stick. This cord cover wall are also no other troublesome accessories to fix, and you can seamlessly connect the cord hider
Can you paint a TV cable raceway?
Both example kits are described by Legrand as paintable, so painting may help an on-wall cover blend with the room. Confirm paint compatibility and preparation requirements in the instructions for the specific product. Paintability does not resolve fit: the channel still needs to accommodate the cable bundle, and the kit needs fittings for the route.
How to install an adhesive cord cover safely
The reviewed installation guide recommends adhesive mounting on smooth, flat surfaces such as painted walls, tile, glass, and wood. It advises cleaning the area and allowing the adhesive time to set before loading the channel. These are that guide’s product instructions, not universal code requirements.
Rank #2
Sale
Delamu Cord Hider, 157in Wire Covers for Cords on Wall, Premium Cable Hider Cord Covers for Wires, Cable Management Wire Hiders for TV, Cable Raceway Kit, W0.95 H0.55in, White
- Passing the UL94 V-0 Rating test, a plastics flammability standard released by Underwriters Laboratories of the United States, UL94 V-0 Rating is defined as Burning stops within 10 seconds on a vertical part allowing for drops of plastic that are not inflames, which means it's safer than ordinary materials because of the higher flame retardancy and brings greater security to your daily use
- Upgraded Snap Structure for Easier Setup: Delamu TV Cord Hider is SUPER EASY to set up. Delamu wall cable hiders for dorm essentials feature Attach & Snap design, making installation easier with click-on-and-off technology that makes opening & closing a snap. Organizing the clutter of cables in your home or office will be easier with our TV cord hider for wall mounted TV
- Organize Messy Cables Neatly: Use the Delamu wall cord hider for home office essentials, a cord covers for 2-4 wires on wall that will make your house look neat, to hide and organize conspicuous cords in your home and office. After installing Delamu cable cover management, you'll love having a tidy home or office with more room to move around, and Delamu wire hider wall will turn out to be your favorite wall cable cover raceway set
- Premium PVC: Delamu TV cord hiders are not just empty words. Delamu wall cable cover management uses high-quality plastic material. Our TV cable hiders are sturdier, unbreakable, free of impurities, no color differences, etc. Cord organizer is even easier when you choose Delamu wire covers wire hiders for cord management
- Simple and Easy Installation: No need for professional help, with its easy-to-use cord concealer instructions, all the messy wire problems in your space can be solved with Delamu home office essentials wire covers for cords on wall. With just one small change, your living room gets a new look. With the Delamu TV cord hider wall, this is possible! You can't go wrong when you choose Delamu TV cord hider for wall mounted TV
- Check the route and surface. Confirm the channel and fittings fit the measured path, and that the wall is smooth, flat, clean, and dry if you are using adhesive.
- Prepare and mount as directed. Follow the specific product guide for cleaning, adhesive placement, alignment, and setting time before adding cables.
- Use screws only as appropriate. The reviewed guide describes screw mounting for uneven surfaces or heavier cable loads. Before drilling, take care to avoid water pipes and electrical wires; if you cannot establish a safe drilling path, stop and consult a qualified professional.
- Route only cables the cover is intended to protect. Follow the product’s stated use and instructions. If your plan involves building wiring inside a wall, get advice from a qualified electrician rather than treating an on-wall cover as an in-wall solution.
What a cord cover can—and cannot—do
A surface-mounted raceway organizes visible cords along the wall and can make them less conspicuous. Its intended use and listing status matter. Legrand states that the C30 is not NRTL listed and is designed only to protect electrical cords and low-voltage wiring and cabling. Do not interpret that product description as approval to conceal building wiring inside a wall. For any installation involving building wiring or uncertainty about safe routing, consult the product instructions or a qualified electrician.
Quick Recap
SaleBestseller No. 2
Bestseller No. 4
Rank #4
ZhiYo 42.5in Cord Covers for 1-2 Wires on Wall, 1" W x 0.4" H, Beige
- Durable Flame-Retardant Cord Hider: Made from flame-retardant PVC material, this cable raceway features a premium texture and odorless design for reliable wire management. A safe and sturdy solution for hiding TV cords in homes with kids or pets
- Medium Size for 1-2 Cords: Sized for 1 standard power cord + 1 speaker wire, or 1 HDMI +1 Cat6. Note: DO NOT use for 2 thick extension cords. This TV Cord Hider Dimensions: 0.96in (Width) x 0.41in (Height). Complete Kit: Includes 3 Self-Adhesive Cable Raceways (14.2" Each, 42.5" Total)
- Wall Cord Concealer or Floor Wire Cover: The ZhiYo Cable Hider has a decorative curved profile, perfect to hide wires along wall or conceal floor wires; Each 14.2" section is ideal for typical wall-mounted TV cable management. For longer runs, seamlessly connect all three cable channels to create a 42.5" total length.
- Tool-Free Installation: With a strong self-adhesive backing, simply peel & stick the pre-applied tape to a smooth, dust-free surface. The wall wire hider can slide on or snap on directly for access. Our tv wire covers for wall can be drilled through and affixed by screws if needed. Enhance your living room with a small and simple change
- Cuttable and Paintable: If you need to DIY, you can use a saw to cut, then sand down the cut edge with fine sandpaper; To paint, simply sand the surface with fine sandpaper and apply two coats of paint; Note: Rigid PVC is only suitable for flat and and hard floors. The 2cm staggering of the cover and the base of the cord cover wall can help the vertical connection from end to end
Rank #3
Sale
Delamu TV Cord Hider, Cord Covers for 2-3 Wires on Wall, Paintable Cable Hider Wire Covers for Cords, Easier Setup Wire Hiders for TV on Wall, Cable Cover Management to Hide Wires, W0.94H0.47in, White
- Passing the UL94 V-0 Rating test, a plastics flammability standard released by Underwriters Laboratories of the United States, UL94 V-0 Rating is defined as Burning stops within 10 seconds on a vertical part allowing for drops of plastic that are not inflames, which means it's safer than ordinary materials because of the higher flame retardancy and brings greater security to your daily use
- Organize Messy Cables Neatly: Use the Delamu TV cord hider, a cord covers for wires on wall that will make your house look neat, to hide and organize conspicuous wires in your home and office. After installing Delamu TV cord hider wall, you'll love having a tidy home or office with more room to move around, and Delamu TV cable cover raceway will turn out to be your favorite TV cord hider
- 4 Pcs -White TV Cord Hiders Wall: Delamu cable management includes 4 Pcs cable cover raceways. The innovative design of TV cable hider wall, cord cover allows for seamless end-to-end connections, creating a continuous and neat channel to hide unsightly wires along your wall for a clean & attractive look
- Upgraded Snap Structure for Easier Setup: Delamu TV cord hider, wire hider is SUPER EASY to set up. Delamu cord covers wire covers for cords on wall feature Attach & Snap design, making installation easier with click-on-and-off technology that makes opening & closing a snap. Organizing the clutter of wires in your home or office will be easier with our TV cord hider for wall mounted TV
- Simple and Easy Installation: No need for professional help, with its easy-to-use cord hider instructions, all the messy wire problems in your space can be solved with Delamu TV wire hider wire covers for cords. With just one small change, your living room gets a new look. With the Delamu TV wire hider for wall, this is possible! You can't go wrong when you choose Delamu wall TV cord hider for cable management
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallCrashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteSpecial offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
