Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallFor metal on a scroll saw, choose a blade specifically rated for the metal and thickness you plan to cut, then check its tooth count, dimensions and end style against your saw. There is no documented universal winner: the available product specifications do not compare cutting speed, finish, lifespan or price under controlled conditions. The practical shortlist below matches documented blades to their stated uses rather than ranking them as tested.
How to choose a metal-cutting scroll saw blade
- Check the saw’s blade fitting. Confirm whether it accepts plain-end or pin-end blades and verify the blade length required by the saw. Do not assume that every scroll saw blade fits every machine.
- Match the maker’s thickness guidance. Use the blade maker’s stated workpiece range as a starting point. A finer, higher-TPI blade is listed for thinner stock; lower-TPI options are listed for thicker stock.
- Check material compatibility. A recommendation for non-ferrous metal or soft sheet metal does not establish suitability for steel. Use the specific blade’s material guidance.
- Consider detail and entry holes. Blade width and thickness, as well as TPI, affect what details and turns a blade can handle. For interior cuts, check the blade listing’s drill-bit guidance for the entry hole.
The figures below are manufacturer or seller specifications, not independent performance tests. Treat them as product-selection guidance, not a promise of a particular speed, finish or blade life.
Metal-cutting blades and their stated ranges
| Blade | End and dimensions | Stated thickness or material guidance | Best fit based on listed specifications |
|---|---|---|---|
| Super Sharps #2/0M | Pinless; 61 TPI | PS Wood Machines lists use up to 1/16 inch thick. | Thinner stock where a high tooth count is appropriate. |
| Super Sharps #2M | Pinless; 30 TPI | PS Wood Machines lists use up to 1/8 inch thick. | Stock within the listed range when a mid-range tooth count suits the cut. |
| Super Sharps #6M | Pinless; 20 TPI | PS Wood Machines lists use up to 3/16 inch thick. | Thicker stock within the listed range. |
| Olson MC48500 | Size 7; 30 TPI; 0.019-inch kerf | Peachtree Woodworking Supply lists minimum material thickness of 3/32 inch and minimum metal thickness of 0.100 inch. | A dedicated metal-blade candidate; verify the product listing and compatibility before ordering. |
| Olson MC48700 | Size 9; 25 TPI; 0.022-inch kerf | Peachtree Woodworking Supply lists minimum material thickness of 1/8 inch and minimum metal thickness of 0.120 inch. | A dedicated metal-blade candidate for work meeting the seller’s stated minimums. |
| Flying Dutchman Iron Man | Plain-end, five-inch blades in multiple sizes | The listing gives width, thickness and TPI by size; consult that listing for the selected size’s details. | Consider when a plain-end five-inch blade fits the saw and the chosen size matches the work. |
The Olson minimum-thickness figures above are reproduced from a seller listing; they are not a tested thickness range. Olson’s 2024 catalog separately identifies blade numbers 3/0–5 for cutting cold rolled steel, copper, brass, aluminum sheet and bronze. Check the current chart and the specific blade number rather than applying that material list to every Olson blade.
When a Moto Saw blade is the right choice
Dremel’s MS53 is a specific 3.9-inch, pin-end blade with 25 TPI and a listed blade thickness of 0.025 inch. Dremel describes it for soft, thin sheet metals and says it fits the Moto Saw blade-change design. It is not a general replacement for standard five-inch blades; choose it only if your saw uses the compatible Moto Saw fitting and the material matches Dremel’s stated scope.
#1 Best Overall
- 5 Inch plain end spiral scroll saw blade in all directions and have 360 cutting capability
- Cutting speed and finish depend on material thickness and number of teeth per inch
- Use for cutting all types of materials and cut intricate curves and joints including wood, plastic, wax, non-ferrous metals, plaster, bone, horn, etc. For use in power scroll saws and hand-held fret and jewelers saw frames. - you never have to turn the work piece.
- Scroll saw blades are made of high carbon steel, hardened and tempered to stay sharp longer.
- Pack quantity: 12 Pack
Can a general-purpose scroll saw blade cut metal?
Some general blade families are described for non-ferrous metals, but that is not the same as a dedicated metal-cutting designation. Bosch describes its plain-end and pin-end product families for wood, plastics and non-ferrous metals, with different listed TPI variants. Match the exact variant and fitting to the saw, and do not extend the non-ferrous-metal recommendation to steel.
Likewise, Olson’s 2024 catalog names cold rolled steel, copper, brass, aluminum sheet and bronze for universal blade numbers 3/0–5. That catalog statement applies to the stated range, not automatically to every blade in the brand’s line.
Rank #2
- Spiral scroll saw blades plain end are made of high carbon steel, hardened, and tempered to be more durable
- The spiral plain end scroll saw blade in all directions and has 360 cutting capability
- Scroll saw blades spiral are used for cutting most materials and intricate curves and joints, including wood, plastic, wax, non-ferrous metals, plaster, bone, and horn
- Plain end spiral scroll saw blades are used in power scroll saws, hand-held fret, and jewelers saw frames. Don't need to turn the workpiece
- 12Pcs x #1 spiral scroll saw blade/ Each Set
What the available specifications do—and do not—tell you
The listed products differ in stated TPI, thickness guidance, material scope and end style, so they can be shortlisted by fit. The available sources do not provide controlled comparisons of cutting speed, cut quality, durability or price. They also do not establish a universal speed setting, lubricant or coolant requirement, or a complete operating and safety procedure. Follow the instructions for your saw, blade and workpiece rather than inferring those details from tooth count alone.
Quick Recap
Best Value
- Spiral scroll saw blades plain end are made of high carbon steel, hardened, and tempered to be more durable
- The spiral plain end scroll saw blade in all directions and has 360 cutting capability
- Scroll saw blades are used for cutting most materials and intricate curves and joints, including wood, plastic, wax, non-ferrous metals, plaster, bone, and horn
- Plain end spiral scroll saw blades are used in power scroll saws, hand-held fret, and jewelers saw frames. Don't need to turn the workpiece
- 12Pcs x #3 spiral scroll saw blade/ Each Set
Rank #4
- 5 Inch plain end spiral scroll saw blade in all directions and have 360 cutting capability
- Cutting speed and finish depend on material thickness and number of teeth per inch
- Use for cutting all types of materials and cut intricate curves and joints including wood, plastic, wax, non-ferrous metals, plaster, bone, horn, etc. For use in power scroll saws and hand-held fret and jewelers saw frames. - you never have to turn the work piece.
- Scroll saw blades are made of high carbon steel, hardened and tempered to stay sharp longer.
- Pack quantity: 12 Pack
Rank #3
- The product is Easy installation and easy handling, easy to use and highly durable
- Scroll Saw Blade for precise sawing of hard/soft wood, plastic, copper and other soft metals
- Made from corrosion-resistant SK5 Japanese carbon steel for increased strength and longevity
- For machines that require 5in. pin end blades.
- Perfect Replacement For WEN 3921 3922, Dremel, TACKLIFE, Shop Fox, SKIL, Rikon, Sears Craftsman, Penn State, Delta, Ryobi SC165VS and all 15in. and 16in
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
