Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
The best kegerator conversion kit is the one that fits your refrigerator, keg connection, and desired tap count—not simply the kit with the most parts. Before buying, choose a tower or door-mounted faucet, confirm whether your keg needs a US Sankey D, ball-lock, or pin-lock coupler, and verify what the kit actually includes.
What to check before choosing a kit
A conversion kit connects a keg to a faucet and supplies the hardware needed to dispense beer. Kits vary, so compare the parts list rather than assuming every package includes a tank, regulator, coupler, lines, or drip tray.
- Mount: A tower sits on top of the refrigerator; a door-mount setup passes a faucet shank through the door or sidewall.
- Keg connection: The cited standard commercial-keg kits use US Sankey D couplers. Homebrew kegs may need ball-lock or pin-lock hardware instead.
- Tap count: Match the number of faucets and couplers to the number of kegs you plan to serve, and check that the gas distribution suits that setup.
- Included components: Look for the faucet and mount or shank, beer line, gas line, coupler, regulator, CO2 tank, and any cleaning or drip-tray items. Check whether a listed tank is supplied empty.
- Appliance fit: Measure usable interior space for the keg and coupler, and confirm there is room for the mount and its hardware. The cited sources do not establish a universal refrigerator or keg fit dimension.
Choose the mount that suits your refrigerator
Tower-mounted kit
A tower is mounted on top of the refrigerator, with the faucet attached to the tower and the beverage line running inside to the keg. The Kegworks tower instructions depict a tower, faucet, beer line, US Sankey coupler, gas line, double-gauge CO2 regulator, and a 5-pound tank as kit components. Treat that list as specific to the depicted kit, not a guarantee about other listings. See Kegworks’ tower conversion instructions.
Door- or sidewall-mounted kit
This arrangement places a shank through the refrigerator door or sidewall, with the faucet on the exterior and the keg inside. Kegworks’ instructions for the depicted door-mount kit specify a 7/8-, 15/16-, or 1-inch opening for the shank. Those are product-specific instructions, not universal hole sizes. The same instructions warn not to drill into the refrigerator’s back wall. Check the appliance layout and the current kit manual before drilling. Read the door-mount instructions.
Recommended Free Tools
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the CO2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use; simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
Match the coupler to the keg
Do not order on the assumption that every keg uses the same fitting. The cited commercial-keg examples use US Sankey D couplers, while Kegco lists distinct Ultimate Tower kit configurations for ball-lock and pin-lock homebrew kegs. Confirm the connection on your actual keg before choosing a kit or replacement coupler.
- US Sankey D: Used by the cited Kegerators.com two-keg tower kit and the Kegco Deluxe Tower kit.
- Ball-lock or pin-lock: Separate Kegco Ultimate Tower kit listings illustrate these homebrew connection options.
Compare documented kit examples
These listings illustrate differences in mount, tap count, and included hardware; they are examples, not an independent ranking or performance test. Verify the current product listing and compatibility before purchase.
Rank #2
BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser
| Kit | Documented configuration | What to verify |
|---|---|---|
| Kegerators.com Standard Tower Kegerator Conversion Kit (2 keg), model 2FTCK | Double-faucet stainless-steel tower, dual-gauge dual-outlet CO2 regulator, two US Sankey D couplers, and two faucets. | Confirm refrigerator fit, the exact parts included in the current listing, and whether the gas distribution suits your intended setup. |
| Kegco Deluxe Tower Kegerator Conversion Kit with 5 lb CO2 Tank | Product listing describes a dual-gauge regulator, American D system coupler, and 5 lb CO2 tank. | Confirm the coupler matches your keg and review the complete current package contents. |
| Kegco Ultimate Tower kit with ball-lock coupler and kit with pin-lock coupler | Separate listings show ball-lock and pin-lock configurations. | Choose only the connection type that matches your keg; check the listing for the remaining components. |
| Kegworks Add-a-Line Kit for Single Faucet Conversion Kit | Listing describes a faucet, D-system US Sankey coupler, two-way CO2 distribution bar, and other parts for adding another tap. | Check compatibility with your existing faucet, keg connection, regulator, and gas setup. |
How the conversion is assembled
The precise procedure depends on the refrigerator and kit. Use the product manual, and inspect the appliance construction before making holes. The following is the general connection sequence shown by the cited Kegworks instructions, not a substitute for the specific manual.
- Prepare the mount. Center and secure the tower on top of the refrigerator, or install the shank through the approved door or sidewall opening. For a door-mount kit, follow its specified hole size and do not drill into the back wall.
- Attach the faucet. Fit the faucet to the tower or shank using the kit’s fittings.
- Connect the beverage line. Run the beer line between the keg coupler and the faucet shank, then secure the connections as directed.
- Connect the gas line. Connect the regulator to the coupler with the gas line according to the kit instructions.
- Follow the manual to pressurize and check the system. Use the specified setup procedure and verify connections before serving.
When a kit is a good fit
A conversion kit can be a practical route if you already have a refrigerator or freezer that can accommodate the keg and can accept the chosen mount. It is not automatically a cheaper or easier choice for every appliance: the available evidence does not establish a universal cost comparison, and installation depends on the refrigerator’s construction and the kit’s requirements. Kegworks describes conversion as “an easy and cost effective way to get the beer flowing at home,” but that is the vendor’s promotional wording rather than an independently established result.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Quick Recap
Bestseller No. 1
Bestseller No. 2
Best Value
BACOENG Double Faucet Tower Beer Kegerator Conversion Kit with Dual Gauge Regulator, No Tank Stainless Steel Keg Tower
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and Co2 volume and adjust Co2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what's left in the Co2 tank, so you don't run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L D System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length.
- INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you'll need to quickly and easily convert your refrigerator into a high-performance draft beer dispenser
Rank #4
BACOENG 1-Tap Kegerator Kit, Complete Beer Tap Kit for Refrigerator with Stainless Steel Tap Probe and Hose & Parts, Keg Tap Kit for Home Bars, Parties, Commercial Use
- 1. DUAL GAUGE REGULATOR: This unit weighs about 3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
- 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
- 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets.
Rank #3
BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank
- 1. DUAL GAUGE REGULATOR: It comes with an appropriate pressure dial that features the style of a knob for regulating pressure. With a weight of 3 pounds, the unit comes with rubber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI.
- 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole.
- 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4" in length, which makes it easy to use on any surface.
- 5. STANDARD METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4" in length, which makes it easy to use on any surface.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
