October DealsAmazon USOctober deal check: compare before you payAmazon US: current deals, useful picks and tech finds.Check DealsSlow PC?RecommendedPC slow today? Run a repair scan before it gets worseResolve common Windows issues and optimize system performance.Scan NowOctober DealsAmazon USDeal season is back - check today's better picksAmazon US: current deals, useful picks and tech finds.See Picks×
Skip to content
Bettesworth Construction
appliance maintenance

How to Clean a Samsung Washing Machine Filter: Front-Load and Top-Load Guide

Samsung washer filters differ by type and model. Learn how to clean an applicable front-load pump filter, follow the right maintenance interval, and avoid confusing it with top-load lint or hose mesh filters.

By Bettesworth Construction Team 3 min read
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

For many Samsung front-load washers, cleaning the pump (debris) filter means draining leftover water through the emergency hose, removing and brushing the filter, checking the pump impeller, and reinstalling everything securely. First identify which filter your washer has: the front-load pump filter, a model-specific top-load lint filter, and the water-supply hose mesh filter are different parts with different instructions.

Identify the filter before you start

The access panel and procedure depend on the filter type and washer model. Do not use front-load pump-filter instructions to remove a top-load lint filter or the water-hose mesh filter.

Filter What it does Where this guide applies
Pump or debris filter Catches lint and small foreign objects in water as it drains. Samsung’s cited US and Canadian guidance describes this filter on applicable front-load models; Samsung US says its top-load washers do not have this pump filter. [Samsung US; Samsung Canada]
Top-load lint filter Collects lint on models equipped with one. Some Samsung top-load models have a lint filter, but not all. Its location and cleaning method are model-specific. [Samsung Australia]
Water-hose mesh filter Screens incoming water at the supply hose connection. This is separate from the pump filter and has its own cleaning procedure. [Samsung Australia]

If the panel, filter, or removal method on your washer does not match the steps below, stop and consult the user manual for your exact model or Samsung support.

Clean the pump filter on an applicable front-load washer

Have a towel, a shallow container, and a clean small soft-bristle brush ready. Residual water may spill even if the washer has already drained.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
DC97-16991A Washer Drain Pump Filter Replacement for Samsung Washer Coin Trap Leak Proof WF42H5000AW WF42H5000AW/A2 WF42H5200AW/A2 WF45K6500AW/A2 WF45M5500A/WF45M5100A W45R6100A WF50K7500A
  • DC97-16991A Washer Drain Pump Filter Part Number: DC97-16991A, AP5586931, 2813211, PS4222025.
  • Washer Coin Trap Filter Replacement Model: W45R6100A WF50K7500AW WF45K6500AW/A2 WF361BVBEWR/A2 WF363BTBEUF/A2 WF365BTBGSF/A2 WF365BTBGWR/A2 WF42H5000AW WF42H5000AW/A2 WF42H5100AW/A2 WF42H5200AF/A2 WF42H5200AP/A2 WF42H5200AW/A2 WF42H5400AF/A2 WF42H5400AW/A2
  • Drain Pump Filter Traps Lint Fit for: WF42H5500AF/A2 WF42H5600AP WF42H5600AP/A2 WF42H5600AW/A2 WF42H5700AG/A2 WF435ATGJRA/A2 WF455ARGSWR/A2 WF511ABR/XAA WF511ABWX/AA WF520ABP/XAA WF520ABP/XAC WF520ABW/XAA WF56H9100AG/A2 WF56H9100AW/A2 WF56H9110CW/A2 WF45M5500A / WF45M5100A
  • DC97-16991A Fit for Samsung Washer Filter Replacement Model: WF56H9100AV/A2 WF457ARGSWR/AA WF221ANG/XAA WF431ABP/XAA WF431ABW/XAA WF455ARGSGR/AA WF448AAP/XAC WF448AAP/XAA WF438AAR/XAA WF448AAE/XAA WF210ANW/XAA WF395BTPASU/A1 WF393BTPARA/A1 WF220ANW/XAC WF220ANW/XAA WF393BTPAWR/A2 WF393BTPAWR/A1 WF457ARGSG WF405ATPAWR/AA WF405ATPAWR/A2 WF45B6300AW
  • If your Samsung washer is leaking when you use it again after cleaning the original filter with a lock, consider replacing this non lock filter! Avoiding flooding in your home.
  1. Turn off the washer and prepare for hot water. Unplug it where your model’s instructions direct. If it has just finished a hot Self Clean, Pure Cycle, or Sanitize cycle, Samsung US advises waiting one hour for the water to cool before draining. [Samsung US; Samsung Australia]
  2. Open the pump-filter access panel. On applicable front-load models, it is commonly near the lower front. Place the towel and shallow container beneath the emergency drain hose.
  3. Drain through the emergency hose. Hold the hose and twist off its cap, then let the water flow into the container. The washer may still contain residual water after the hose stops draining. [Samsung US; Samsung Canada]
  4. Remove the filter. Once the water has drained, twist the filter counterclockwise. Depending on the model, the knob may require a push-and-turn motion, similar to opening a medicine bottle.
  5. Clean the filter and check the housing. Brush debris from the filter with a small toothbrush or another soft-bristle brush. Check that the drain-pump impeller in the housing is free of debris; Samsung Canada also advises cleaning the recess. [Samsung US; Samsung Canada]
  6. Reinstall the parts. Twist the filter clockwise until secure; Samsung US says to secure it in a vertical position. Firmly replace the emergency-hose cap, return the hose to its clip, and close the access panel. [Samsung US]

How often should you clean the filter?

Samsung’s recommended pump-filter schedule differs by market. Follow the guidance for your washer’s market and model rather than treating either interval as universal.

Samsung guidance Recommended pump-filter interval
United States At least once a month or approximately every 40 washes, whichever is more frequent. [Samsung US]
Australia Five to six times per year for Australian models. [Samsung Australia]

For a separate component, Samsung Australia recommends cleaning the water-hose mesh filter one to two times a year. That schedule is not the pump-filter interval. [Samsung Australia]

Rank #2
Sale
AHGDFJLH 2pcs Washing Machine Fluff Filter Box for WA406DJHDWR/SA – Compatible with Samsung DC63-0102196A/DC63-01021A Washer Parts
  • Tailored Compatible with Samsung WA406DJHDWR/SA washers: DC63-0102196A/DC63-01021A models fit the washer’s filter slot exactly, no gaps that let fluff bypass and stick to laundry.​
  • Efficient fluff capture: dense filter mesh traps lint, hair, and small fibers thoroughly, keeping laundry free from unwanted debris after washes.​
  • Easy to clean and reinstall: just rinse with water to remove trapped fluff, no complex disassembly—reuse quickly without affecting washer operation.​
  • Durable plastic construction: withstands regular water exposure and cleaning, avoiding cracks or deformation that shorten filter life.​
  • Fixes fluff-related issues at once: stops fluff residue on clothes, prevents filter clogging that slows water drainage, and maintains washer cleaning efficiency.

When a filter inspection may help

A clogged pump filter can contribute to drainage problems and leaks. Samsung Ireland lists wet clothes at the end of a cycle, longer cycles, poor spinning, noise, and vibration as possible signs of a clogged filter. These symptoms can have other causes, so treat them as reasons to inspect the filter—not proof that it is blocked. [Samsung Ireland; Samsung US]

Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

If the steps do not match your washer

Do not force a panel, cap, or filter that looks different or will not turn as described. Samsung US directs owners to the user manual when its general steps do not match their front-load washer. Check the manual for your exact model or contact Samsung support before proceeding. [Samsung US]

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Best Value
20Pcs Washing Machine Water Filter, Washing Machine Water Inlet Valve Washing Machine Filter Hose Washer with Screen Filter, Washing Machine Hose Filter Inline Water Filter Washing Machine Inlet Valve
  • 【Effective Filtration】 The washing machine filter has been carefully designed to effectively capture debris and prevent the water inlet valve from being blocked, ensuring that the inlet water is clean. It ensures high-quality use while keeping the washing machine running smoothly.
  • 【Premium Material】Our washing machine water filter is made of premium plastic material, which is rust-proof and wear-resistant, ensuring the stability and practicality of long-term use. This washing machine water valve filter is a reusable and reliable product, allowing you to say goodbye to the trouble of frequently changing filters.
  • 【Easy to use】This hose washer filter with screen is easy to disassemble and install, first unscrew the water inlet pipe at the water inlet valve of the washing machine, then use a vise to pull out the old filter and finally put the new washing machine filter, you can also clean it with a small brush for a cleaner wash every time.
  • 【Multifunction Compatibility】Our washing machine inline water filter is suitable for many models and brands of washing machines on the market, this washing machine water inlet valve filter can be widely used. Using this filter reduces sediment and impurities, ensuring your washing machine lasts longer, making it a practical choice for any home.
  • 【What You Will Get】 You will receive 20pieces washing machine hose filter, which can meet your replacement needs, and the size is 2*0.6cm/0.79*0.24in. If you are not satisfied with what you received washing machine water filter, please let us know and we will solve the problem for you as soon as possible.
Rank #4
ZNTVW DC97-16991A Washer Drain Pump Filter Compatible With Samsung
  • Function: This washer drain pump filter helps to keep your washer drain pump working properly by trapping lint, hair, and other debris. Extends the service life of your Washing Machine
  • Compatible Models: Compatible with Samsung WF42H5600AW/A2, WF42H5000AW, WF42H5000AW/A2, WF42H5600AP, WF42H5600AP/A2. Replaces 2813211 AP5586931 PS4222025 EAP4222025 etc
  • Compatible model: WF56H9100AV/A2 WF457ARGSWR/AA WF221ANG/XAA WF42H5600AP/A2 WF431ABP/XAA WF431ABW/XAA etc. if you are not sure whether the model is suitable, please use the "Crtl+F" shortcut to search for the model you need, or contact us to help you check
  • Premium Quality: Made of highly durable ABS plastic with strict quality testing. Deformation-resistant design ensures long service life and stable performance
  • Easy To Install: 1. Drain a any leftover water in the pump 2. Unthread the old coin trap filter counterclockwise to remove(clean out the housing as necessary) 3. Install the new coin trap filter by aligning the notch in the trap with the tab in the housing
Rank #3
DC97-16991A Washing Machine Drain Pump Filter - Compatible with Samsung WF42H5600AW/A2, WF42H5000AW, WF42H5000AW/A2, WF42H5600AP, WF42H5600AP/A2 - Replaces AP5586931, 2813211, PS4222025, EAP4222025
  • PART NUMBER REFERENCE: This DC97-16991A Washing Machine Drain Pump Filter is a direct replacement for OEM part numbers: DC97-16991A, AP5586931, 2813211, PS4222025, and EAP4222025.
  • MODEL COMPATIBILITY: Compatible with specific Samsung washing machine models including, but not limited to: Compatible with Samsung WF42H5600AW/A2, WF42H5000AW, WF42H5000AW/A2, WF42H5600AP, WF42H5600AP/A2. Replaces 2813211 AP5586931 PS4222025 EAP4222025 etc Compatible model: WF56H9100AV/A2 WF457ARGSWR/AA WF221ANG/XAA WF42H5600AP/A2 WF431ABP/XAA WF431ABW/XAA etc.
  • FUNCTIONAL SPECIFICATION: The drain pump filter traps lint, hair, and fibrous debris to prevent blockage of the drain pump assembly. Regular filtration maintains pump flow rate and prevents strain on the pump motor, contributing to operational stability.
  • MATERIAL CONSTRUCTION: Manufactured from high-durability ABS plastic. The material exhibits resistance to deformation under standard operating temperatures and maintains dimensional stability over repeated use cycles.
  • INSTALLATION PROCEDURE: Installation requires draining residual water from the pump housing, rotating the existing filter counterclockwise to remove, cleaning the housing cavity, and inserting the new filter by aligning the notch with the internal tab. No additional tools are required.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.

Leave a Reply

Your email address will not be published. Required fields are marked *

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

More from the Site Office

Recommended PC Tool
Recommended PC Tool
PC Slower Than It Used to Be?Free scan - under a minute
Crashes, No Sound, or Screen Glitches?Free driver scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.