Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallIf your Samsung dryer’s Sensor Dry cycle ends early or leaves clothes damp, residue on the moisture sensor bars may be interfering with detection. Turn the dryer off, unplug it, let the drum cool, then gently wipe the bars with a soft cloth and mild soap and dry them thoroughly. The bars’ position varies by model, so check your manual if you cannot find them.
Where to find the moisture sensor bars
Samsung describes the Sensor Dry bars as two curved metal bars inside the drum, near the lint filter housing or beside it. Their exact placement can vary by dryer model. If you do not see them in that area, use the manual for your specific model rather than probing around the drum.
Sensor Dry uses the bars to detect whether moisture remains in the clothes. Residue—particularly buildup associated with frequent dryer-sheet use—can coat the bars and interfere with detection. The dryer may then act as if clothes are dry and stop while they are still damp. Samsung US explains the sensor and cleaning method.
How to clean the sensor safely
- Switch off and unplug the dryer. If it has been running, wait until the drum has cooled. Samsung Canada advises these precautions in its dryer maintenance guidance.
- Open the door and locate the bars. Look inside the drum near the lint filter housing or beside it for two curved metal bars.
- Wipe them gently. Use a soft cloth dampened with warm water and a small amount of mild soap. Do not pour water into the drum.
- Remove soap and residue, then dry the bars. Wipe them with a clean, dry cloth until thoroughly dry before using the dryer.
Abrasive cleaners, metal tools, and excessive water can damage the dryer; Samsung’s guidance calls for gentle wiping instead. An ordinary soft cloth is sufficient—no specialty sensor cleaner is needed.
#1 Best Overall
- DC61-02627A Moisture Plate Sensor Fits for Samsung Kenmore Dryer.
- DC61-02627A Dryer moisture sensor Replace for part numbers:2069516, AP4578789, PS4206812, EAP4206812, PD00023015.
- Moisture sensor DC61-02627A detects the amount of moisture in the laundry load.This sensor is an essential part of any modern dryer, and it is important to choose a sensor that is durable and accurate.
- Disconnect the power before installing this part. Wear work gloves to protect your hands.
- Any questions not completely satisfied, please contact us, you can have or exchange within 30 days.
If clothes are still damp after cleaning
Sensor residue is only one possible cause. Samsung’s troubleshooting guidance identifies load and airflow issues that can also affect drying. Use the checks below to narrow down what to try next. Samsung’s troubleshooting page for clothes that are not dry provides model-specific guidance.
The cycle ends early, but the load is small
A small load may not brush against the bars enough for reliable sensing. Try a suitable load size for the cycle, following the limits and recommendations in your dryer’s manual.
Rank #2
- COMPATIBILITY: The DC61-02627A Samsung Dryer Moisture Sensor is compatible with DV Series Sam-sung Dryers, 402 Series Kenmore Dryers. Size is about 4 4/5in*1 1/8in(4.80in*1.13in). (Note: Please confirm the model number before purchasing.)
- PRODUCT FUNCTION: If your dryer's humidity sensor isn't working or dryer won't shut off while clothes are dry, the sensor may be damaged. Simply replacing the humidity sensor with a new one can resolve these issues: Broken Parts, Potential Damage, Failed Sensing, Non-Functioning, Leaking, Defective.
- PREMIUM MATERIAL: The DC61-02627A dryer moisture sensor parts are made of high-quality stainless steel, making them durable, resistant to wear and chemical corrosion, and rust-resistant, ensuring a long service life.Excellent quality of moisture sensor for samsung dryer parts ensures reliable and accurate maintenance, making it a cost-effective solution.
- HIGH-PRECISION MEASUREMENT OF CLOTHING HUMIDITY: The DC61-02627A sensor is highly accurate and reliably detects moisture levels in laundry,sends a signal to the control board when the clothes are dry. This sensor is a vital component of any modern dryer, so choosing a durable and accurate one is crucial.
- HOW TO USE THE DC61-02627A DRYER MOISTURE SENSOR PLATE BAR: You can search for the installation video on YouTube by entering "#DC61-02627A". The video will guide you through the installation process. Therefore, even if you're unfamiliar with how to install the DC61-02627A dryer humidity sensor plate, you can complete the task in 30 minutes or less.(NOTE:Before installing this part, disconnect the power cord. Wear work gloves to protect your hands. )
The load mixes lightweight and heavy items
Lighter fabrics may reach the bars and dry before heavier pieces do, so the cycle can end while thick items remain damp. Samsung describes Damp Alert as a way to signal when lighter items are dry; some older models call this feature Mixed Load Bell. Check your manual to see whether your model has it and how to use it.
The dryer takes too long to dry
Check that the lint filter is clean and that airflow is not obstructed. If the problem continues after checking the filter and airflow, follow Samsung’s troubleshooting and service guidance for your exact model rather than repeatedly cleaning the sensor.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →Quick Recap
Rank #4
- This is an O.E.M. Authorized part
- Fits with various Samsung brand models
- Oem part # DC97-08894A
- Product Dimension: 2.0"L x 7.0"W x 1.0"H
Rank #3
- The Samsung DC61-02627A Moisture Sensor is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications
- Replacement Samsung Dryer Moisture Sensor monitors the clothing’s moisture level and sends a signal to the control board when the clothes are dry
- Samsung DC61-02627A Dryer Moisture Sensor is also called a Plate Sensor
- High quality Samsung OEM DC61-02627A Dryer Moisture Sensor is manufactured with premium materials for durability and exact fit, be sure to follow instructions in owners manual when installing this part
- Repair your appliance with confidence when you choose Genuine Samsung Appliances Parts & Accessories
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
