Recommended Free Tools
Start with the manual for your exact Paslode model: cleaning steps are not universal. For the cordless XPro 30° framing nailer CF325XPRO24 (item 906800/906800DHL), Paslode’s procedure is to remove fasteners, fuel and battery, clean the filter and specified internal parts with the recommended cleaner, lubricate only where directed, then fully reassemble and check operation. Do not use the disassembly steps below for another model unless its manual says to.
Find your model’s manual in Paslode’s official tool-manual library. The detailed procedure here is Paslode document 906868-1, dated August 30, 2024.
What you need before cleaning
- The manual for your exact nailer. The steps below apply only to the CF325XPRO24 / item 906800 cordless XPro 30° framing nailer.
- Paslode Cordless Tool Cleaner/Degreaser, part 219348 (Canada: 219086), and Paslode Cordless Tool Lubricating Oil, part 401482. Paslode warns that other cleaners may damage electrical, plastic or rubber parts or leave residue, while other oils may increase combustion residue. Its cordless nailers do not need routine oiling during normal operation; use oil after cleaning only where the manual directs.
- A clean, lint-free rag and a 5/32-inch hex key (part 401331). The procedure says this key is supplied with the cited framing nailer.
Paslode’s Cordless XPro 30° Framing Nailer product FAQ identifies the recommended cleaner and oil. Follow the cleaner manufacturer’s directions as well as the nailer manual.
Make the nailer safe to service
- Remove all fasteners, the fuel cell and the battery. Paslode’s procedure states: “Remove all fasteners, fuel, and battery prior to servicing the tool.”
- Let the tool cool before spraying cleaner. Do not spray a hot nailer.
- Work from the model-specific procedure and diagrams. If your model’s manual does not authorize the work, or you are unsure how to proceed, stop and contact Paslode or a trained technician.
Clean the CF325XPRO24 filter and internal parts
The following sequence summarizes procedure 906868-1 for this model. Use the official manual’s illustrations for the disassembly, oil quantities and reassembly details; do not improvise those steps.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →#1 Best Overall
- Multi-Purpose Spray Gun Cleaning Kit:Cleaners of different sizes can be used to clean tools of different sizes. This kit can also be used in conjunction with any diluent or solvent to remove residues and dirt from all types of spray guns, including suction guns, gravity-fed guns, high-flow low-noise guns, detail guns, touch-up guns, airless guns and compressor-driven guns.
- Nylon Brushes Paint Gun Cleaning Kit:Each nylon cleaning brush is equipped with high-quality nylon bristles of moderate hardness, which will not scratch the pipes or the piping system.
- Elastic Wire Brush: This brush is made of fine elastic metal wires, capable of reaching deep into all crevices and gaps where dirt, dust, and contaminants accumulate, allowing you to easily and thoroughly clean the spray gun.
- Reusable Cleaning Tools: As long as you use it properly,spray tool cleaning kit can be used multiple times. High quality stainless steel materials are not rusty and easy to clean.
- Widely Used:Spray Paint Guns Cleaning Kit comes with everything you require to give your spray guns or air brush a thorough, deep clean. This handy spray guns cleaning kit is all you need to keep your spray guns clean and in excellent working condition!
1. Wash and dry the grille and filter
Remove the grille and air filter. Wash them with soapy water or Paslode Cordless Tool Cleaner/Degreaser, then let both dry completely before refitting.
2. Separate the assemblies carefully
With the specified 5/32-inch hex key, loosen the two nose-piece screws and remove the handle-magazine assembly. Follow the illustrated order to remove the cap, disconnect and slide out the magnet cartridge, and separate the handle-magazine and motor assemblies. Avoid pulling wires or damaging the fan, fan shaft, foam pad or combustion chamber.
3. Clean the cylinder head and seal area
Spray cleaner on the cylinder head, including around the spark plug, and allow dirt to drip away. Keep overspray and dirty cleaner out of the handle. Wipe with a clean, lint-free rag; repeat if deposits remain. Clean and clear the seal rings and spark plug as shown in the manual.
4. Lubricate the seal rings as directed
Apply Paslode Cordless Tool Lubricating Oil (part 401482) evenly to the seal rings. The manual specifies the position of the seal-ring gaps during reassembly; follow its diagram. Push the piston assembly down using the handle of a screwdriver or a clean piece of wood.
Free tools Windows power users keep installed
One-click scans. No signup required.
5. Clean the sleeve and combustion chamber
Spray the inside of the sleeve and combustion chamber with cordless tool cleaner. Invert the motor assembly so excess cleaner and dirt can drain, then wipe the area and repeat if needed.
Rank #2
- Precision Fit for Your Paslode Nailer: Engineered specifically for Paslode F350S, F250S, F325C, and F250S-PP series pneumatic framing nailers. This kit directly replaces OEM parts 402011, 501001, and 500407, ensuring a perfect fit and restoring factory-level performance for both classic square emblem and newer V emblem Power Master Plus models.
- Complete All-in-One Repair Kit: Get everything you need in one package: 1x 402011 Cylinder Seal Sleeve, 1x 501001 Cap Gasket, 1x 500407 Main Valve Spring, and a comprehensive set of O-Rings. No more searching for individual parts. This complete set targets the core sealing and power components of your nailer for a thorough rebuild.
- Quick 10-Minute Installation, Back to Work Fast: Designed for simplicity. With easy-to-follow steps and no special tools required, you can replace worn parts in about ten minutes. Perfect for handling unexpected breakdowns on the jobsite or performing routine preventative maintenance, minimizing costly downtime.
- Built with Industrial-Grade Durability: Features high-resilience oil-resistant rubber O-Rings and precision springs, rigorously tested to withstand over 200 PSI operating pressure. These quality materials resist wear and fatigue, significantly extending the service life of your nailer for demanding framing, roofing, and remodeling projects.
- Proactive Maintenance for Peak Performance: Regular seal replacement is key to maintaining optimal air tool function. Using this kit for preventative care helps avoid common issues like power loss due to air leaks, weak drives, or frequent jamming. Keep your nailer operating at its best, ensuring consistent efficiency and job site productivity.
6. Apply only the manual’s remaining measured oil
Procedure 906868-1 specifies small amounts of oil at particular locations and movements of the assembly and driver blade to distribute it. Refer to the manual’s diagrams and quantities for these steps rather than applying oil generally.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Reassemble completely and check operation
- Reverse the specified disassembly sequence, using the manual’s illustrations to confirm component placement.
- Secure the cap assembly and firmly tighten all four cylinder-head screws before operating. Paslode warns: “Never operate the Paslode Cordless Framing nailer unless all four Socket Head Cap Screws are firmly tightened on the cylinder head.” An unsecured cap can release burning gases; loose screws can damage the tool and create fire or injury risks.
- Only after complete reassembly, check the tool for proper operation as directed by the manual. Paslode notes that some smoke may come from the exhaust during the first few cycles as excess oil burns off.
How often should you clean it?
Follow the interval guidance for your model and adjust it to working conditions. Paslode says cleaning frequency depends on nail count and conditions: dirty environments and sustained high firing rates call for shorter intervals. Its chart is a guideline; shorten the interval if the tool becomes excessively dirty between cleanings, or lengthen it if it does not need cleaning at the scheduled interval.
Paslode’s XPro product FAQ separately says cordless nailers may require cleaning after driving 10,000 nails or more. Treat that as a broad manufacturer benchmark, not a fixed interval that overrides the model’s condition-based guidance. Paslode also lists annual cleaning and day-to-day maintenance videos on its service videos page.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →When cleaning is not the fix
If the tool makes an unusual fan noise, Paslode advises switching it off and checking whether cleaning is needed and whether the fuel cell is expired or empty. If the noise continues, contact Paslode. Its troubleshooting FAQ also lists battery charge, a dirty filter, correct nail loading and jams as checks; these are diagnostic checks, not substitutes for the safe servicing procedure.
Do not continue beyond the field-service steps allowed by your model’s manual. For service or parts, use Paslode’s troubleshooting and FAQ page to find its recommended support route, and verify that any cleaning kit or part fits your model.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
