The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →If your Roomba is leaving hair or debris behind, start by emptying the bin, then check the filter, brushes, brush ends and vacuum path for buildup. A bin that fills quickly can cause collected debris to end up back on the floor; hair wrapped around the pickup parts can also interfere with cleaning. The right cleaning method depends on your Roomba model.
1. Empty the bin and check for overfilling
In homes with heavy pet shedding, hair can fill the bin before a cleaning run finishes. iRobot identifies this as a reason a Roomba may leave debris on the floor. Empty the bin and check its full indicator, whose design varies by model. If your model offers a setting to stop when the bin is full, using it can help prevent overfilling, but the robot may end its run early.
2. Clean the brushes and pickup path
Remove hair and debris from the main brushes and the parts they turn on. Depending on the model, that may include brush ends, caps, axles, pegs, bearings or other end pieces. Then follow the model’s instructions to clear the vacuum path and clean the bin and filter. iRobot recommends cleaning main brushes once a week, or twice a week in homes with pets. Its support guidance warns that excessive hair buildup in the brushes can permanently damage a Roomba.
Do not assume every part can be rinsed. For the s9 and the e, i, j and Combo 10 Max guidance covered by iRobot’s support pages, the filter is not designed to be washed or exposed to liquid. Where the model instructions permit rinsing the bin by hand in warm water, let it dry completely before putting it back.
#1 Best Overall
- 【Compatible Model】The side brush compatible with IRobot Roomba 500 600 700 Series 692 694 680 660 665 651 650 630 614 595 585 564 560 550 vacuum cleaner.
- 【Easy to Replace】These side brushes are easy to remove and replace as part of routine maintenance. To make your home more cleaner,more comfortable.
- 【Warm Reminder】To keep your robot running at peak performance, the side brush are recommended to be replaced every 2-3 months.
- 【Package include】6 pieces side brushes with screw.
- 【Important Notice】 If the side brushes are bent or curled due to shipping, please recover them by simply soaking them in warm water for several minutes. It will not affect the quality and performance.
3. Adjust the cleaning schedule and passes
If hair builds up between runs, more frequent cleaning can reduce the amount each run has to collect. iRobot recommends frequent scheduled cleaning as part of floor conditioning. Its recommendation of five runs per week applies to a specific scenario on its e/i/j/Combo 10 Max guidance: cleaning all rooms or using Imprint Smart Mapping Direct Room Cleaning. It is not a universal schedule for every model or household.
On supported models, two cleaning passes may help in homes with pets or during periodic deep cleaning. App options and availability depend on the robot model and software.
Rank #2
- Well Fit –Working great fit for iRobot Roomba 600 500 series 692 694 676 595 610 675 677 671 655 645 614 620 630 635 650 660 665 680 690 695 536 551 552 564 585 589 Vacuum Cleaner
- Works Great – These Accessories are made of PC, it is sturdy enough to use many times, Compatible and work just like the original one, To keep robot running at best performance, The parts are recommended to be replaced every 2-4 months
- Tips – If the side brushes are bent or curled due to shipping, Please recover them by simply soaking them in warm water for several minutes. It will not affect the quality and performance
- Package Include – 2 x Bristle and Flexible Beater Brush, 6 x Filters, 6 x Side Brush, 1 x Set Cleaning Tools, 1 x Screw Driver, 6 x Screw
- After service – Our product have been well tested, Examined and package before sending off, Please just feel free to contact us if you have any problem for the products or the service,We will do the best to give you a satisfactory solution
4. Check whether static is affecting carpet pickup
For the Roomba 900 series specifically, iRobot notes that dry, static-prone conditions may make pet hair harder to pick up from carpet. Its suggestions include raising relative humidity or using a carpet static-control product on affected areas. Do not spray or mist water or product on or near the Roomba. This is a model-specific possibility, not a general explanation for every Roomba leaving clumps.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.5. Decide whether a part needs replacement
Clean and inspect the parts before replacing them. If a brush is worn or damaged, or pickup remains poor after model-specific care, check the exact robot model before buying a compatible replacement. iRobot recommends replacing main brushes every 6–12 months or as needed; this is a maintenance recommendation, not a guaranteed service life.
Recommended Free Tools
Quick Recap
Best Value
- What's in the Box: 3 x Flexible Beater Brushes, 3 x Bristle Brushes.
- This is a Replacement Parts Compatible with All iRobot Roomba 600 and 700 Series 606, 610, 611, 612, 614, 615, 616, 618, 619, 620, 621, 625, 627, 630, 635, 637, 640, 643, 645, 650, 651, 652, 655, 660, 665, 667, 670, 671, 675, 676, 677, 680, 681, 685, 690, 691, 692, 693, 694, 695, 696, 697, 698, 760, 761, 770, 780, 790. Models.
- To keep your Robot Vacuum running at peak performance, Please maintain the flexible beater and bristle brush every month( every 2 weeks in homes with pets) and replace it every 5-6 months.
- The Flexible Beater and Bristle Brush superiorly pick up pet hair, dirt, dust, and debris and works well on floor types—hardwood, carpet, tile, and stone.
- It is easy to be replaced and installed on your robot vacuums. Shipping with a brown box to prevent from being damaged in transit.
Rank #4
- Compatible Model: The parts compatible with iRobot Roomba 600 500 series 536 551 552 564 585 589 595 610 614 618 630 620 650 651 660 665 675 680 690 692 694 695 Vacuum Cleaner.
- Premium Material: Bristle and Beater Brushes are made of PC, it is sturdy enough to use many times, Compatible and work just like the original one.
- Easy to Use:Replace the old main brushes within minutes,the Flexible Beater and Bristle Brush superiorly pick up pet hair, dirt, dust, and debris and works well on floor types—hardwood, carpet, tile, and stone
- Best Performance: To keep robot running at best performance, The parts are recommended to be replaced every 2-4 months. Regulary replacing Roomba's flexible beater brush & bristle brush maintain Roomba's cleaning performance and reduce battery drain.
- After service : Our product have been well tested, Examined and package before sending off, Please just feel free to contact us if you have any problem for the products or the service,We will do the best to give you a satisfactory solution.
Rank #3
- Compatible with Roomba e, i and j Series Robot Vacuums Only
- Easy to install and remove with the use of a coin or similar household item
- Replacement Edge-Sweeping brushes
- Reaches along edges to remove dirt, dust and debris
| Option | When it makes sense | What to check |
|---|---|---|
| Clean and inspect | First step when hair or debris is accumulating or pickup has worsened. | Follow the instructions for your model; check the bin, filter, brushes, brush ends and vacuum path. |
| Replace a part | When a brush or filter is worn or damaged, or performance remains poor after cleaning. | Match the part to the exact Roomba model. iRobot directs owners to model-compatible parts through its parts store or authorized retailers. |
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
