Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Choosing the right blade for a Ryobi saw starts with the saw itself: identify whether you have a reciprocating saw, circular saw, or jigsaw, then confirm the exact model’s permitted blade size and mounting style in its manual. Only after that should you match the blade to the material and cut. A reciprocating blade is not a circular-saw blade, and a circular blade’s dimensions are not universal across Ryobi models.
The examples below show how to make that match without guessing. They use Ryobi’s published specifications for a reciprocating set, a circular blade, and its accessory categories; always treat the manual for your particular saw as the final fit check.
As an Amazon Associate I earn from qualifying purchases.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
At a glance
| Name | Best for | Key spec | Platforms | Checked |
|---|---|---|---|---|
| RYOBI A231501 15-piece reciprocating saw blade set | Ryobi reciprocating-saw owners cutting metal, wood, or plastic | 15 blades: 9-inch 6-TPI (3), 9-inch 8-TPI (3), 6-inch 14-TPI (3), 6-inch 16-TPI (3), 6-inch 24-TPI (3) | All Ryobi corded and cordless reciprocating saws, according to the product listing | November 2026 |
| RYOBI A066102 circular saw blade | General-purpose hardwood, softwood, plywood, and lumber cuts when the saw manual allows the dimensions | 6-1/2-inch diameter, 24 carbide teeth, 5/8-inch arbor, thin-kerf design | Ryobi circular saws only after model-specific manual verification | November 2026 |
| RYOBI jigsaw blade sets | Ryobi jigsaws, with the exact set chosen from the model and material requirements | Catalog category is listed; shank style and material specifications were not established here | Ryobi jigsaws after checking the exact product page and manual | November 2026 |
Which Ryobi saw do you have?
The first decision is the tool category, not tooth count or blade length. Ryobi’s accessory catalog separates reciprocating-saw blades, circular-saw blades, and jigsaw blade sets into distinct categories. Start by reading the saw’s label, manual, or model information so you know which category applies.
Reciprocating saw
A reciprocating saw uses a narrow blade that moves back and forth. If that is the tool in your hands, shop the reciprocating-saw section and verify the model scope stated on the listing. The documented A231501 set is an example for reciprocating saw owners only; it should not be presented as a blade for a circular saw or jigsaw.
Popular on Amazon
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Both tools are designed to fit into difficult to reach spaces
- Complete a wide range of applications with a high-performance motor that delivers up to 300 UWO, and an impact driver delivering up to 1,400 in-lbs of torque
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
Circular saw
A circular saw takes a round blade. Diameter and arbor are critical fit dimensions, so a listing for one circular blade cannot be treated as a specification for every Ryobi circular saw. The A066102 example is 6-1/2 inches in diameter and uses a 5/8-inch arbor; those are product specifications to compare with your model’s manual, not a universal Ryobi standard.
Jigsaw
A jigsaw uses a narrow blade with a particular shank interface. Ryobi’s catalog lists jigsaw blade sets, but the evidence used here does not establish their shank style, material uses, or compatibility by model. For a jigsaw, identify the exact blade set and compare its published shank and use information with the saw manual before ordering.
How does the saw manual determine whether a blade fits?
The manual is the authority for the exact tool. Use it to confirm the blade category, allowed dimensions, and mounting requirements before relying on a product description.
- Record the exact model. Do not stop at “Ryobi circular saw” or “Ryobi reciprocating saw.” Model numbers distinguish tools that may have different permitted dimensions or mounting details.
- Find the blade requirements. For a circular saw, look for permitted blade diameter and arbor size. For a reciprocating saw, check the required blade interface and any stated length or operating limits. For a jigsaw, look for the accepted shank style.
- Compare like with like. Diameter and arbor apply to circular blades; reciprocating blades are described by their own length and tooth specifications; jigsaw blades require their own shank match. Do not transfer a measurement from one saw type to another.
- Resolve conflicts in favor of the manual. If a package sounds broadly compatible but its dimensions do not match the manual, do not assume the broad wording overrides the model-specific requirement.
This check matters because the documented sources do not establish that one blade fits every Ryobi saw. The A231501 listing makes a specific broad claim for Ryobi corded and cordless reciprocating saws, while the A066102 page gives dimensions for that particular circular blade without providing a complete cross-model compatibility chart.
How should you match a blade to the material and job?
After fit is confirmed, match the blade’s stated material scope to the work. The cited Ryobi examples cover different materials and tool types, so use the wording on the relevant product page rather than assuming every blade is multipurpose.
Also popular on Amazon
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
- Metal, wood, or plastic with a reciprocating saw: Ryobi describes the A231501 set for all three broad material groups.
- Hardwood, softwood, plywood, or lumber with a circular saw: Ryobi lists those materials for the A066102 6-1/2-inch circular blade.
- Jigsaw work: Select from the exact jigsaw blade listing after checking its material description and shank details; those details are not established by the catalog evidence summarized here.
“General purpose” still has a defined scope. For A066102, it refers to a thin-kerf circular blade that Ryobi lists for the four wood categories above; it does not establish suitability for metal, plastic, masonry, or every other material.
Outdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchWindows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallWhat does the A231501 reciprocating blade set include?
The RYOBI A231501 15-piece reciprocating saw blade set contains five groups of three blades:
| Blade length | Tooth specification | Quantity |
|---|---|---|
| 9 inches | 6 TPI | 3 |
| 9 inches | 8 TPI | 3 |
| 6 inches | 14 TPI | 3 |
| 6 inches | 16 TPI | 3 |
| 6 inches | 24 TPI | 3 |
Ryobi describes the set as compatible with all of its corded and cordless reciprocating saws and lists metal, wood, and plastic as intended material groups. That compatibility statement is limited to Ryobi reciprocating saws; it does not mean the blades fit Ryobi circular saws or jigsaws.
The set gives you five published TPI values, but the cited product page does not map each value to a particular material or finish. Therefore, use TPI as one comparison field alongside the blade’s length, the job, and the saw manual—not as a stand-alone rule that determines the correct blade.
What are the A066102 circular blade’s specifications?
The RYOBI A066102 is a 6-1/2-inch, 24-tooth carbide circular-saw blade designed for a 5/8-inch arbor. Ryobi describes it as a general-purpose thin-kerf blade for hardwood, softwood, plywood, and lumber.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Also popular on Amazon
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
Before buying it, compare all of those dimensions with the manual for your circular saw. A 6-1/2-inch diameter and 5/8-inch arbor are facts about A066102, not proof that every Ryobi circular saw accepts them. If your manual specifies a different diameter or arbor, look for a blade that meets the manual instead.
Use the material wording precisely. The page supports the four listed wood categories; it does not provide evidence here for metal cutting, plastic cutting, or a particular finish quality. The carbide-tooth and thin-kerf descriptions are useful identifiers when comparing listings, but they do not replace the fit and material checks.
What should you do if you own a Ryobi jigsaw?
Begin in Ryobi’s Power Tool Accessories catalog, where jigsaw blade sets are listed separately from circular and reciprocating blades. Then open the exact product page and your saw’s manual to confirm the shank style, permitted dimensions, and stated material use.
The available evidence does not identify a universal jigsaw shank standard, a complete set of compatible models, or a material-to-tooth specification for those sets. Do not fill those gaps by assuming that a jigsaw blade will mount like a reciprocating blade or that a blade listed for one jigsaw fits every model.
Free tools Windows power users keep installed
One-click scans. No signup required.
How do you choose a blade step by step?
- Identify the saw type. Write down “reciprocating,” “circular,” or “jigsaw.” If you cannot identify it, stop and locate the model information before shopping.
- Locate the model manual. Record the model number and the blade requirements it states.
- Filter by mounting fit. Check circular diameter and arbor, reciprocating interface and relevant length information, or jigsaw shank style as applicable.
- Filter by material. Select only a listing whose stated material scope includes the job. The A231501 listing names metal, wood, and plastic; A066102 names hardwood, softwood, plywood, and lumber.
- Compare the remaining specifications. Use length, diameter, arbor, shank, tooth count, and TPI only in the context where they apply. A tooth count from a circular blade is not interchangeable with TPI on a reciprocating blade.
- Check the product’s current compatibility wording. A broad statement such as A231501’s “all Ryobi corded and cordless reciprocating saws” has a defined tool-type scope. Preserve that scope when making your decision.
- Save the product page and manual reference. Keeping the exact listing with the model number makes it easier to reorder the same fit later and to resolve a mismatch before opening the package.
Which blade should you choose in common situations?
You have a Ryobi cordless reciprocating saw and cut mixed materials
Start with A231501 because Ryobi describes that set for its corded and cordless reciprocating saws and for metal, wood, and plastic. Choose among its listed lengths and TPI values only after considering the job and the information in your saw manual; the source does not assign each TPI value to a specific material.
Also popular on Amazon
- Toolwiz 17-inch magnetic sweeper maintaining a load capacity of up to 8.8 pounds provides a perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, bolts, and metal shavings from workshops or garage floors.
- Convenient and portable：17” is good for home, small workshop, or small yard as it is space-saving and more reachable for narrow areas. Perfect for collecting nails or small parts in the car, under the table, and in other nooks or crannies.
- Upgraded Handle Design: The handle features a sturdy, non-telescopic design to completely prevent slipping during use. By simply adding or removing the extension poles, the height can be adjusted to 3 different lengths: 18.9" (48 cm), 32.5" (82.5 cm), and 42.5" (108 cm) from ground to top. This customizable height helps prevent back bending and muscle strain, making your cleaning tasks effortless
- Flexible wheels: Upgrade wheel screws to avoid being too tight to spin or too loose. More comfortable 3-inch rubber wheels roll smoothly on carpet, grass, concrete, and hardwood floors. Just push and pull this rolling magnet-sweeper to pick up metal nails easily.
- Lightweight materials: The magnetic nail sweeper's compact and lightweight design makes the sweeping can be done anywhere you want, Push or pull it under the furniture, passing through the workshop floor, driveway, mud, grass, and gravel.
You have a Ryobi circular saw for plywood or lumber
Check whether the manual allows a 6-1/2-inch blade with a 5/8-inch arbor. If it does, A066102 is a documented example whose stated material scope includes plywood and lumber, as well as hardwood and softwood. If either dimension differs, continue searching for a blade that matches the manual.
You have a Ryobi jigsaw but no blade information
Do not substitute a reciprocating or circular blade. Use the jigsaw category in Ryobi’s accessories catalog, identify a specific set, and verify its shank and material details against the model manual before purchase.
You are replacing a blade and only know the old blade’s size
Use the old blade as a clue, not as the sole authority. Confirm the size and mounting requirement in the manual, then compare the replacement listing’s complete specifications and material scope.
Recommended Free Tools
What mistakes cause the wrong blade purchase?
- Shopping by brand alone: “Ryobi blade” is incomplete. The saw category and exact model come first.
- Assuming a circular diameter is universal: A066102’s 6-1/2-inch diameter and 5/8-inch arbor describe that product only.
- Extending a reciprocating compatibility claim: A231501’s broad compatibility wording applies to Ryobi reciprocating saws, not every Ryobi saw type.
- Choosing by TPI without a fit check: The set lists five TPI values but does not provide a material or finish mapping for each one.
- Ignoring the material line: A blade listed for wood should not automatically be treated as a metal or plastic blade, and vice versa.
- Guessing jigsaw shank details: The catalog category alone does not establish the shank style or model compatibility of a particular set.
How can you verify a listing before ordering?
Read the listing as a checklist rather than a headline. First, confirm that the product is for the same saw type. Next, match every fit dimension or mounting description that your manual specifies. Then confirm that the stated material use covers the job. Finally, preserve any limits in the wording: “all Ryobi corded and cordless reciprocating saws” is narrower than “all Ryobi saws,” and a product-specific circular specification is not a cross-model guarantee.
If a listing omits a dimension your manual requires, treat the fit as unconfirmed and consult the complete product page or Ryobi support information rather than inferring compatibility. The Ryobi accessories catalog is a useful starting point for locating the correct blade category, but the exact product page and model manual still determine the purchase.
Also popular on Amazon
- APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- The DIY Tools for Men-Men won't know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- EASY TO USE: Just two simple steps to get the job done - drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
- Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women - Men won't know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father's Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
How this guide’s examples were selected
The examples are limited to products and categories documented in Ryobi’s published pages. They were selected because the sources provide concrete fit or material information: A231501 supplies a reciprocating-saw compatibility statement, lengths, TPI values, and broad material uses; A066102 supplies circular-blade diameter, arbor, tooth count, and listed wood materials; and the accessories catalog establishes the separate jigsaw category. No performance ranking or hands-on test is implied.
Frequently Asked Questions
Does the A231501 set fit a Ryobi cordless reciprocating saw?
Yes. Ryobi’s product listing describes A231501 as compatible with all Ryobi corded and cordless reciprocating saws. That statement is specific to reciprocating saws and should not be extended to circular saws or jigsaws.
Do these 3 things before closing this tab:
1Scan for outdated or missing drivers - takes under a minute2Clear out junk files and repair common Windows errors3Fix the driver behind crashes, sound loss and screen glitchesIs a 6-1/2-inch circular blade guaranteed to fit my Ryobi saw?
No. The 6-1/2-inch diameter and 5/8-inch arbor are specifications for the A066102 blade. Compare both with the manual for your exact circular-saw model before buying.
Can I select a reciprocating blade from TPI alone?
No. A231501 includes 6, 8, 14, 16, and 24 TPI blades, but the cited listing does not assign each TPI value to a specific material or cut finish. Treat TPI as one specification among the fit and job requirements.
Where can I find the correct Ryobi blade category?
Ryobi’s Power Tool Accessories catalog separates reciprocating, circular, and jigsaw blade products. Use it to reach the relevant category, then verify the exact product details against your saw manual.
