Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
A DXV Fitzgerald sink remodel can work if the sink top, pedestal, faucet-hole pattern and existing plumbing all match the room. Start by confirming the exact sink and pedestal models, then measure the wall, floor, drain and water-supply locations before ordering; DXV cautions that its published dimensions are nominal and may vary.
What should you confirm before planning a DXV Fitzgerald sink remodel?
The Fitzgerald is a pedestal-sink line, not necessarily a single all-in-one product. DXV describes its 24-inch sink top as fine fireclay with an integral soap recess, and says the matching pedestal leg is sold separately for the cited one-hole top. Treat the top and pedestal as separate items until the seller confirms what a particular listing includes.
As an Amazon Associate I earn from qualifying purchases.
Before committing to the remodel, identify these four things:
- The exact top: Fitzgerald tops are listed in both one-hole and three-hole faucet configurations.
- The matching pedestal: DXV’s installation guide identifies pedestal kit D20030 for the Fitzgerald 24-inch sink. Confirm with the seller that the kit is the correct one for the selected top and finish.
- The faucet: Its mounting pattern must match the holes in the top. Choose the faucet first, or verify that a faucet you already own suits the top.
- The room and plumbing: Measure the actual space and compare the drain and supply locations with the manufacturer’s installation drawings.
Do not rely on a collection name or a product photo alone to establish compatibility. The DXV Fitzgerald collection includes multiple configurations, and product availability signals can differ between pages. Verify the model number, color, hole pattern and included components for the exact item being sold.
Popular on Amazon
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Both tools are designed to fit into difficult to reach spaces
- Complete a wide range of applications with a high-performance motor that delivers up to 300 UWO, and an impact driver delivering up to 1,400 in-lbs of torque
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
Which Fitzgerald sink top fits your faucet?
Match the faucet to the sink’s drilled holes, not just to its style or finish. DXV’s product listings identify a 24-inch one-hole top and a three-hole version; the latter is also listed by LIXIL Pro as an 8-inch widespread top.
| Fitzgerald top | What the listing identifies | What to verify |
|---|---|---|
| 24-inch, one-hole | One faucet hole; fine-fireclay top with integral soap recess | That the chosen faucet is intended for a one-hole installation, and whether the seller includes the separate pedestal |
| 24-inch, three-hole | Three faucet holes | That the faucet uses a compatible three-hole layout; confirm the faucet’s required spacing and included components with its manufacturer or seller |
A three-hole top is not automatically compatible with every widespread faucet: the faucet’s required hole spacing must also match the sink. Likewise, do not assume a one-hole faucet will cover unused openings in a three-hole top; check the faucet and sink specifications before purchase. The supplied product information identifies the hole patterns, but does not provide enough detail to confirm compatibility for a particular faucet model.
If you are keeping an existing faucet, check its installation instructions or model details for the hole count and spacing it requires. If that information is unavailable, ask the seller or a plumbing professional to confirm fit before ordering. Changing the faucet after purchasing the top can create avoidable return and installation problems.
Also popular on Amazon
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
How do you check whether the sink and plumbing will fit?
Use DXV’s Fitzgerald installation guide as a planning reference, then compare its rough-in drawings with measurements from your own bathroom. The guide names the 24-inch Fitzgerald sink with pedestal kit D20030 and shows nominal dimensions and supply and waste locations. It also cautions that dimensions may vary within manufacturing tolerances, so the drawing is not a promise that a fixture will fit a particular room or line up exactly with existing plumbing.
- Measure the available area. Record the width of the intended sink location and the distance from the wall to the front edge of the existing fixture or other nearby obstruction. Check the usable floor area where the pedestal will stand.
- Locate the plumbing. Measure the drain and both water-supply locations relative to fixed reference points, such as the finished wall and floor. Note whether pipes emerge from the wall or floor, and compare their positions with the guide’s rough-in drawing.
- Check the wall and floor conditions. Confirm that the planned location is clear and that the floor area can accommodate the pedestal. If the room has unusual trim, a raised or uneven floor, or visible plumbing that cannot be moved, account for that before ordering.
- Compare the exact product documents. Match the drawing to the actual top and pedestal model you intend to buy. Ask the seller or DXV to clarify any mismatch between a listing, the installation guide and the items included in the order.
- Allow for tolerance, not just nominal size. Because DXV says dimensions can vary, do not base a tight installation on a catalog measurement alone. If the available space or plumbing alignment is close, get the actual fixture dimensions or professional advice before purchase.
These checks are especially important when replacing an existing pedestal sink. A new fixture may be the same nominal width but still have different connection positions or require a different pedestal. The manufacturer’s drawing helps identify what to compare; on-site measurements determine whether the layout works in your bathroom.
What parts and tools should you have ready?
Confirm the complete bill of materials before removing the old sink. At minimum, establish whether the order includes the sink top and pedestal, and separately plan for the faucet, drain and water-supply connections as applicable to your installation. The available product information does not establish what every retailer bundles, so read the exact listing and ask about missing or separately sold components.
Also popular on Amazon
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
DXV’s installation instructions list tools and materials that may be needed, including adjustable and channel-lock pliers, a drill, screwdrivers, tape measure, pipe wrench, tubing cutter, sealant, hacksaw and level. The right selection depends on the existing connections and the specific replacement work. Use fittings and adapters that match the replacement hookups rather than assuming the old supply lines or drain fittings will transfer unchanged.
Before work begins, review the instructions for both the sink and the faucet. The Fitzgerald guide is an AS America, Inc. document with a 2017 copyright and revision marked 7/17; check that the instructions you receive apply to the exact fixture being installed. If a current product or seller provides updated directions, follow the directions for that item and applicable local requirements.
How do you approach the replacement safely?
DXV’s guide says to shut off the water before replacement work, use appropriate fittings and follow local codes. It also warns that “Certain installations may require professional help.” The outline below is a planning sequence, not a substitute for the manufacturer’s instructions or a qualified plumber where the work calls for one.
Also popular on Amazon
- Toolwiz 17-inch magnetic sweeper maintaining a load capacity of up to 8.8 pounds provides a perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, bolts, and metal shavings from workshops or garage floors.
- Convenient and portable：17” is good for home, small workshop, or small yard as it is space-saving and more reachable for narrow areas. Perfect for collecting nails or small parts in the car, under the table, and in other nooks or crannies.
- Upgraded Handle Design: The handle features a sturdy, non-telescopic design to completely prevent slipping during use. By simply adding or removing the extension poles, the height can be adjusted to 3 different lengths: 18.9" (48 cm), 32.5" (82.5 cm), and 42.5" (108 cm) from ground to top. This customizable height helps prevent back bending and muscle strain, making your cleaning tasks effortless
- Flexible wheels: Upgrade wheel screws to avoid being too tight to spin or too loose. More comfortable 3-inch rubber wheels roll smoothly on carpet, grass, concrete, and hardwood floors. Just push and pull this rolling magnet-sweeper to pick up metal nails easily.
- Lightweight materials: The magnetic nail sweeper's compact and lightweight design makes the sweeping can be done anywhere you want, Push or pull it under the furniture, passing through the workshop floor, driveway, mud, grass, and gravel.
- Prepare the work area. Have the fixture instructions, tools and any confirmed replacement fittings available. Protect nearby surfaces and clear access to the sink and its connections.
- Shut off the water before disconnecting anything. Confirm the supplies are off before removing the old fixture. If you cannot shut off the water reliably or do not know how to proceed safely, stop and contact a plumbing professional.
- Remove the existing fixture carefully. Disconnect the supply lines and drain fittings as appropriate to the existing installation. Avoid forcing a connection or cutting a pipe unless the work and its consequences are understood.
- Recheck the rough-in against the new components. Before final placement, compare the actual sink and pedestal with the measured room and plumbing positions. Pause if the drain or supplies do not align with the planned connections.
- Install according to the product instructions. Use fittings or adapters suitable for the replacement hookups and follow the sink and faucet directions. Keep local plumbing requirements in view; requirements can vary by jurisdiction and project scope.
- Check the completed connections. Follow the manufacturer’s instructions for restoring service and checking the installation. If a connection leaks, a component does not fit, or the fixture cannot be positioned as intended, stop rather than improvising a repair.
Not every replacement requires a permit or a licensed plumber, and the supplied guide does not determine those requirements. Check with the local authority if the project involves plumbing changes or if local rules are unclear. Professional help is sensible when the existing hookup, fixture support or required modifications are beyond your experience.
How can you source a Fitzgerald sink if listings show limited availability?
DXV’s collection and product pages show mixed lifecycle information, including products marked discontinued or out of stock. Those labels are a reason to verify availability, not proof that no remaining retail inventory exists. Before planning around a Fitzgerald fixture, contact the seller and confirm the exact items can be supplied.
Ask for written confirmation of:
- the full model or SKU for the sink top and the pedestal;
- whether the top is one-hole or three-hole and which finish or color is being offered;
- whether the pedestal is included or sold separately, and whether it is the appropriate kit for that top;
- current stock status, expected shipping condition and what happens if an item arrives damaged;
- the seller’s return terms, especially for a special-order or discontinued item; and
- warranty coverage for the exact item purchased through that seller.
DXV’s cited one-hole sink product page lists a five-year limited warranty. Confirm that coverage still applies to the precise product, purchase channel and sale terms; do not assume the same warranty treatment for every listing, used fixture or separately sourced component. Check the seller’s return policy before ordering as well, since an incorrect hole pattern or missing pedestal can be costly to resolve after delivery.
Also popular on Amazon
- APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- The DIY Tools for Men-Men won't know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- EASY TO USE: Just two simple steps to get the job done - drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
- Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women - Men won't know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father's Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
What are the main remodel risks to resolve before ordering?
Most avoidable problems come from treating a product-family name as a complete specification. Resolve the following issues before you schedule installation or remove the existing sink:
- Top and pedestal are not both in the order. The cited DXV one-hole listing says the leg is sold separately. Verify every line item and model number.
- The faucet drilling does not match. Confirm the number of holes and, for a three-hole faucet, the required spacing.
- Rough-in locations are assumed rather than measured. Compare real wall, floor, drain and supply positions with the guide; nominal dimensions may vary.
- Availability is unclear. A page marked discontinued or out of stock does not settle whether a seller has remaining stock. Verify the exact finish and both components directly.
- Warranty or return assumptions are unconfirmed. Ask the seller about terms for the exact SKU before purchase, especially when availability is limited.
- The work scope grows during removal. If the replacement requires plumbing changes or reveals conditions you cannot address safely, pause and consult a professional rather than improvising.
A reliable purchase decision therefore depends on more than whether a 24-inch Fitzgerald top is listed online. The selected faucet pattern, matching pedestal, real rough-in fit and seller terms all need to be settled together.
Free tools Windows power users keep installed
One-click scans. No signup required.
Frequently Asked Questions
Can I keep my current faucet when replacing a Fitzgerald sink?
Possibly, if its hole count and spacing match the new top and its connections are suitable for the installation. If you cannot identify the faucet model or its mounting requirements, have the seller or a plumbing professional verify compatibility before buying the sink.
Can a Fitzgerald sink be installed if DXV marks it discontinued?
A discontinued label does not establish whether any retailer still has remaining stock. Ask the seller to confirm the exact SKU and finish are physically available, and clarify return options before placing an order.
Does a 24-inch sink top mean the finished pedestal sink will fit a 24-inch space?
Not necessarily: the nominal top width is only one part of the fit question, and the manufacturer notes that dimensions can vary. Compare actual fixture dimensions and the installation drawing with the room and plumbing measurements.
Do I need a permit to replace a pedestal sink?
The manufacturer’s installation guide does not determine permit requirements. Local rules depend on the jurisdiction and the work involved, so check with your local building or plumbing authority if you are changing plumbing or are unsure.
