The Buc-ee’s under construction near Kansas Speedway and the Legends in Kansas City, Kansas, is now expected to open in Spring 2027, according to a September 26, 2026 post from the location’s page reported by the Topeka Capital-Journal. That is an updated estimate, not a confirmed opening date: Buc-ee’s official location page lists the project for 2027 and says estimated dates can change.
When is the Kansas City, Kansas Buc-ee’s expected to open?
The latest reported estimate is Spring 2027. The location’s page posted “Now expected to open Spring/2027” on September 26, 2026, according to the September 29 report by the Topeka Capital-Journal. Buc-ee’s official locations page currently gives the Kansas City, Kansas project a year-only estimate of 2027. Neither source establishes an exact opening day.
As an Amazon Associate I earn from qualifying purchases.
| Timing | What was reported |
|---|---|
| Earlier target | October 2027, as reported by the Topeka Capital-Journal. |
| Latest reported estimate | Spring 2027, attributed to a September 26, 2026 post from the local location page. |
| Official company listing | 2027; no season or day is specified, and the estimate may change. |
Where is the new Buc-ee’s being built?
The travel center is in Kansas City, Kansas, near the Legends shopping area and Kansas Speedway, around 110th Street and Village West Parkway. It is a Kansas-side project, not a location in Kansas City, Missouri.
Recommended Free Tools
What is being built?
The Topeka Capital-Journal reported the proposed travel center at 74,000 square feet, with 120 fueling positions and 12 electric-vehicle charging stations. The report also put the expected project cost at about $95 million. These are reported project specifications and a projected cost, not independently verified measurements or final as-built figures.
#1 Best Overall
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
What construction work is underway around the site?
Work associated with access to the development includes shifting Village West Parkway north, building a roundabout, and improvements to the North 110th Street/I-70 interchange. KCTV reported in January 2026 that Village West Parkway was scheduled to close from January 26 through late September while crews carried out road work. In a later update, the station reported temporary openings of the parkway and I-70 ramps at North 110th Street for the September 21–28, 2026 Hollywood Casino 400 race weekend, with construction set to resume afterward.
Those closure and detour details describe plans and conditions reported in 2026, not current traffic instructions. Check a current Unified Government or contractor notice before traveling through the area.
Rank #2
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Compact and Lightweight: Both tools are designed to fit into difficult to reach spaces. The 1/4" impact driver has a length of 5.55 in. and weighs just 2.8 lbs, while the 1/2" drill/driver measures only 7.5 in. and weighs 3.6 lbs
- Both the DEWALT impact driver and electric drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
- Power drill cordless with 1/2" single sleeve ratcheting chuck provides tight bit gripping strength, making bit changes faster and more secure
How did the project reach this stage?
- April 2024: KCTV reported that discussions began after Buc-ee’s sought rezoning for property east of I-70.
- November 2024: Site approval followed, according to KCTV.
- October 2025: Crews broke ground. Buc-ee’s issued a groundbreaking release on October 2, 2025, and KCTV later reported the October groundbreaking.
- January 2026: KCTV reported the planned Village West Parkway closure for road realignment and roundabout construction.
- September 2026: The road and interchange had temporary openings around the race weekend; the local Buc-ee’s page then posted the Spring 2027 estimate.
Why did the opening estimate move earlier?
The available reporting shows the change from October 2027 to Spring 2027 and describes visible construction progress, but it does not establish a specific reason for the revised schedule. There is also no independently verified construction-completion percentage in the cited reports, so progress should not be translated into a claim that the project is nearly finished.
Quick Recap
Best Value
- Milwaukee Ink all Fine Point Marker, Black, 4 Per Pack
- 4 per pack Features Clog Resistant Marker Tip Writes through Dusty, Wet and Oily Surfaces Durable Marker Tip for Writing on Concrete, OSB and Rough Surfaces
- Clog resistant tip writes on dusty, wet and oily surfaces and is optimized for rough surfaces such as OSB, cinderblock and concrete
- Hard hat clip- attaches for easy access
- Quick dry time with reduced smearing and marking
Rank #4
- Long Nib and Deep Hole Marker: Our mechanical carpenter pencil with 45mm nib is designed for easy marking of deep holes or narrow areas. These construction pencils are the great choice for woodworking tools, construction tools, carpenter tools, contractor tools, wood carpentry tools and architect tools
- Extra Refills in 2 Colors for Versatile Marking: The construction mechanical pencil comes with 12 extra 2.8mm refills, including 6 red and 6 black refills. The black refill is suitable for light surfaces, while the red wax is perfect for dark surfaces. Our carpenter mechanical pencil makes sure that you'll have an ample supply for extended use
- Built-in Sharpener: Our construction pencil comes with a built-in sharpener to ensure the mechanical pencil tip is always sharp and ready for use. Never buy an extra pencil sharpener again. A great tool for any woodworker pencil, contractor pencils. The refill can easily be extended or retracted with a simple click of the pencils mechanical, allowing you to work more efficiently and accurately
- Portable Clip Design: Our deep hole construction pencil features a portable clip design, easy to carry and attach to your pocket or tool box, so that you can keep the carpenter pencils mechanical close at hand, making it a convenient tool to have on the go. Great gifts choice for carpenters
- Stronger Pencil Lead: The black refills are made of lead, sturdy and smooth. The red refills are made of wax, clear and light. These marking pencils are much thicker and stronger than normal pencils during the marking process of construction work, suitable for various surfaces, such as glasses, metal, boards, floors, walls, furniture, etc. The written marks can be easily wiped with a wet paper towel when needed
Rank #3
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
