iFixit’s FixHub is a portable soldering system, not simply a cordless soldering iron. It combines the 100W-maximum SLD101 Smart Soldering Iron with the battery-powered STN101 Portable Power Station, which adds onboard controls, USB-C power and up to about eight hours of claimed continuous soldering runtime.
Announced on September 12, 2024, with the station scheduled for release on October 15, FixHub remains listed in iFixit’s US store. Prices observed on August 18, 2026 were $79.95 for the iron, $249.95 for the Portable Soldering Station and $299.95 for the Soldering Toolkit. Prices, availability, taxes and shipping restrictions vary by region.
As an Amazon Associate I earn from qualifying purchases.
What FixHub includes
There are three distinct ways to buy the system:
- Smart Soldering Iron: the SLD101 iron, heat-resistant cap, USB-C cable and one Bevel 1.5 tip. It requires an external USB-C Power Delivery source; iFixit recommends 65W to 100W for optimal performance.
- Portable Soldering Station: the Smart Soldering Iron combined with the STN101 Portable Power Station. This is the cordless configuration, with a battery, display and physical controls.
- Soldering Toolkit: the station package plus a tool roll containing solder, flux, cutters, wire strippers, tweezers, safety glasses, desoldering braid, a silicone mat, dispensing pen, spudger, soldering splint and tip cleaner.
The iron itself is therefore not cordless. It can operate independently from a suitable USB-C PD charger or power bank, but battery operation requires the Portable Power Station or another mobile power source with appropriate output.
Recommended Free Tools
iFixit says the idea grew from the inconvenience of taking an extension cord to a vehicle to repair a car stereo. The company also notes that more than 1,000 of its repair guides require a soldering iron. That explains FixHub’s intended role: a field-repair tool for vehicles, workshops, classrooms and temporary workspaces, rather than only a bench accessory.
#1 Best Overall
- Extreme Tinning: Fanttik T1 MAX is equipped with 4pcs tailor-made C210 (C210-I, C210-IS, 2pcs C210-K) rapid heating soldering tips, long service life, and anti-oxidation. Achieve a fast heating in 7 seconds, reduce the waiting time, and improve the efficiency of your repair tasks.
- Compatible DC/AC Modes: With the built-in 2600mAh battery in wireless mode, the maximum DC Output is 12W for up to 60 minutes at 840°F (450°C). Its small size is not bound by space, and maintenance work can be carried out anywhere. In wired mode, the maximum AC Output is 16W. It can be powered by a charger or mobile power supply with a Type-C port.
- Intelligent Gravity Sensing: After stopping working for 30 seconds, the soldering iron will enter sleep mode. T1 MAX will automatically restart to heat up to the temperature you set when picking it up again. NOTE: The red light flashes while heating, and the green light stays on when heating is complete.
- 6 Temperature Levels: The tail knob of the soldering iron has 6 levels for adjusting the temperature. Can be adjusted accurately and efficiently for different work scenes in the range between 390°F to 840°F (200°C to 450°C) so as not to damage heat-resistant components.
- Compact Structural with Stability: Equipped with an aluminum storage stand, the base tray can be pressed to pop up to store the welding head. The exquisite industrial design allows the soldering iron to be displayed on the table like an aesthetic piece, keeping the workbench clean, beautiful, comfortable, and pleasant.
Power, temperature and battery
The iron has a maximum advertised output of 100W and a factory preset temperature of 350°C (660°F). Temperature is adjustable from 200°C to 420°C (395°F to 790°F). iFixit says it reaches working temperature in seconds; Hackaday reported a heat-up time of under five seconds in its review.
A 100W rating describes maximum electrical power capability, not a promise of constant 100W heat delivery at the tip. Actual power draw changes with the selected temperature, tip shape, joint size, thermal mass and the amount of heat needed for recovery.
The Portable Power Station contains a 55Wh battery, specified as 15,600mAh or 5,200mAh at 10.8V. iFixit claims about eight hours of continuous soldering. That should be treated as an upper-use-case claim rather than a universal runtime guarantee. Repeated high-load joints, two connected irons, charging another device, ambient temperature and battery age can all reduce endurance.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Clear out junk files and repair common Windows errorsFree Scan →The station has two front USB-C Smart Ports with up to 100W combined output. It can power two irons, but the irons share that output. A rear USB-C port accepts up to 45W for charging and computer interfacing. The station measures 95 × 33.3 × 170mm and weighs approximately 696.8g, or 1.5lb.
Controls and software
The iron deliberately avoids a conventional screen and temperature buttons on the handle. Its illuminated ring communicates temperature status, while detailed settings are changed through one of three interfaces:
Rank #2
- Fast Heating & Adjustable Temperature - This digital soldering station heats up fast and has a wider temperature range (194℉~896) to choose from. The soldering iron can stay at the set temperature consistently with its PID temperature stabilization. This product conforms to the UL Standard (U.S.), [an Important Evaluation for Electric Appliances Safety].
- Space Saving – This compact soldering station helps save precious work space with an integrated soldering iron holder to provider greater space saving. The metallic protective mesh at the rear of the station prevents accidental contact with the soldering iron, and the mesh comes with soldering tip storage slots.
- Functions & Features – includes easy °C to °F conversion, Sleep Mode (5/10/30 mins adjustable), and Digital Temperature Calibration. All functions and temperature read-outs are displayed via a digital display, and accessed via a master control knob. The station enters sleep mode when non-use is detected for longer than the set duration to reduce unnecessary wear for the soldering tip and heating element.
- 12-IN-1 – This soldering iron kit includes the YIHUA 926 III Soldering Station, 2 Helping Hands, 6 Soldering Tips(YIHUA #1200/900M Series), Roll of Lead-free Solder Wire (35g), Solder Sucker, ESD Safe Tweezers, Solder Wire Dispenser, Cleaning Sponge.
- Choose YIHUA with Confidence – Enjoy our 12-month US- exclusive manufacturer technical coverage and 24/7 professional assistance on Amazon. Note: This model is designed to operate on 110-127V with a US-standard power plug.
- the Portable Power Station’s display and controls;
- the FixHub Web Console; or
- the Android app.
The Web Console can show serial information and install firmware updates. iFixit says it requires a USB connection to a computer and a compatible Chromium-based browser such as Chrome or Brave. The product pages also warn that some units may ship with earlier firmware and recommend updating before first use.
This arrangement is a usability trade-off. The handle is clean and uncluttered, but a standalone iron does not offer the immediate onboard adjustment found on products such as Pinecil or other TS100-style irons. If you use the iron without the station, deeper configuration may require a computer and the Web Console.
Windows Errors? Fix Them Before They Spread
Repair common Windows errors and clear accumulated junk for a smoother, more stable PC - no reinstall needed.Free scan · no reinstallOutdated Drivers Are Slowing You Down
One free scan finds every outdated or missing driver and matches the right update for your exact hardware.Free scan · exact hardware matchSafety features—and their limits
FixHub includes several automation and handling features:
- after approximately 30 seconds without movement, idle mode reduces the tip to a configurable temperature, listed as 200°C by default in iFixit’s repair documentation;
- after approximately 60 seconds without movement, sleep mode turns the iron off;
- movement triggers automatic reheating;
- an accelerometer provides fall protection;
- a magnetic, heat-resistant cap protects the tip during storage;
- the non-rolling body reduces the chance of the iron moving across a work surface;
- the cap can also act as a stand when attached to the Power Station.
These features reduce avoidable mistakes, but they do not make soldering risk-free. Use ventilation or fume extraction, eye protection, a heat-resistant work surface and proper handling for molten solder. Take particular care around lithium-ion batteries: a soldering iron should not be used carelessly near damaged or swollen cells.
Quick-Swap tips
FixHub uses tool-free Quick-Swap Soldering Tips. iFixit lists Bevel 1.5, Cone, Wedge, Point, Bevel 2.6, Knife 2.5 and Knife 1.4 options. The iron ships with the Bevel 1.5 tip.
Rank #3
- High-power Performance: This soldering iron kit's 110W heating element allows the soldering iron to heat up fast. You can set your desired temperature from 90°C~480°C(194°F~896F°). Precise double numerical display presents the set temperature and actual temperature at the same time for you to monitor real-time temperature changes.
- User-friendly functions: 3 preset channels save you the hassle of repeated temperature configurations. You can save your usual temperature settings and press one button to toggle between channels. Sleep mode allows the soldering station to rest in low temperature when not in use for an extended period, thus reducing wear on the soldering iron and prolonging the lifespan of the soldering station. You can set the timer from 0 to 99 minutes.
- Compact and space-saving design: This soldering iron kit integrates soldering iron, iron holder, tip cleaner, solder wire dispenser, helping hands, magnifying glass with LED lights and tip storage slots into one station, thus greatly reducing the space needed. This design can be especially useful for those who have smaller working space and require more space optimization.
- Complete set of accessories: WEP 927-IV comes with a full-fledged set of accessories to suit your varied needs. No more holding the components in your hands. Helping hands can assist you in fixating components from different directions. Magnifying glass with LED lights helps you with more micro soldering work by enlarging components and providing sufficient light. Use solder wire dispenser and tip storage slots to store your solder wire and soldering tips, making your workbench well-organized.
- Please note that WEP 927-IV model uses WEP #1400 Soldering Iron Tips, which are available in our store. This soldering iron kit is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket.
The tip connection uses a 3.5mm TRS-style interface. That does not establish compatibility with TS80, TS100, Pinecil or standard cartridge tips. Buyers should plan around iFixit’s own tip range rather than assuming that the broad TS100-compatible ecosystem will fit.
This is one of the most important long-term ownership differences between FixHub and a Pinecil-style iron. FixHub offers a controlled, purpose-built tip system; TS100-style products offer more third-party choice and often cheaper replacement options. Tip availability and cost should be part of the purchase decision, especially for technicians who use several profiles.
Repairability is a genuine differentiator
FixHub’s strongest advantage is not just battery capacity or heat-up speed. iFixit publishes repair guides, teardown documentation, troubleshooting material, schematics, replacement parts and other service information for the system. Listed replacement categories include batteries, boards, buttons, cables, case components, knobs, screens, screws and switches.
The company also maintains a public FixHub GitHub repository with low-level communication, serial-interface, command-line and firmware/build information. Hackaday described the hardware as modular and comparatively easy to open.
There is an important distinction, however. Documentation and replaceable parts make FixHub unusually serviceable for a consumer soldering product; they do not make it fully open hardware. As Hackaday noted, public schematics and repair resources are different from publishing complete manufacturing files such as Gerbers. iFixit also warns that hardware damage caused by inventive tinkering may not be covered by its warranty.
Rank #4
- 5s Fast Heating: Our cordless soldering iron is equipped with 3 replaceable precision soldering tips(C210-I, C210-IS, C210-K), featuring 5‑second rapid heating, long service life, and excellent anti-oxidation. Whether for initial heating or reheating, it responds quickly, significantly reducing waiting time and improving efficiency for repairs and DIY projects. Additionally, with its solder sucker and precision tweezers, you can carry out soldering tasks smoothly.
- 5℃ Precise Temp Control&LED Display: With precise 5℃ temperature control & large LED screen, you can easily adjust temperature from 392℉-932℉(200 - 500℃, with ℃/°F conversion)by the +/- buttons. Ideal for precision soldering, circuit board tinning, jewellery repair, RC repair, wire below 18 AWG and etc.
- Compatible Wireless/Wired Modes –With the built-in 3200mAh battery in wireless mode, the maximum DC Output is 12W for up to 60 minutes at 932°F (500°C). When you need more power or longer run time, just connect the soldering iron to any USB-C charger or power bank, and you're ready to go. In wired mode, the maximum AC Output is 16W.
- Auto-sleep & Auto-shutdown: After powered on, the soldering iron stand still for 30s will enter sleep mode. If no operation is detected within 10 minutes, it will automatically power off — safe and energy-efficient. And the battery soldering iron will automatically restart to heat up to the temperature you set when picking it up again. Note: The red light flashes during heating, while the green light stays on when ready for use.
- Premium Quality: The soldering iron main unit is crafted from high-quality engineering plastic with a diamond-pattern texture, which can improve grip and heat insulation. Its ergonomic design ensures comfort even during prolonged use. The square-shaped main unit can be placed on any flat surface without the risk of rolling or slipping. The tip fixing nut is made of heat-resistant material, which is durable and not easy to melt or loosen.Built for durability, this soldering iron kit delivers reliable performance you can count on.
Setup checklist
- Confirm whether you bought the iron alone, the station or the complete toolkit.
- If using the iron independently, connect it to a USB-C PD source rated from 65W to 100W.
- Install the supplied Bevel 1.5 tip.
- Connect the USB-C cable and remove the protective cap before heating.
- Set or confirm the temperature using the station, Web Console or Android app.
- Update the firmware before starting an important project.
- Wait for the status ring to indicate that the selected temperature has been reached.
- Choose idle and sleep settings appropriate to the job.
- After use, follow safe handling procedures before replacing the cap. The cap is heat-resistant, but the tip and surrounding metal remain hazardous.
If the iron does not heat
Work through these checks in order:
- Verify that the USB-C source supports sufficient Power Delivery output.
- Reseat the cable and, where applicable, engage its locking collar.
- Check that the heater switch is enabled.
- Confirm that the selected temperature or safety mode is not preventing heating.
- Reseat the tip correctly.
- Check whether a firmware update is required.
- If connected to the station, inspect its error display and error log.
For unresolved problems, use iFixit’s FixHub repair and troubleshooting documentation. Opening a battery-powered device without understanding thermal and lithium-ion hazards can create a greater problem than the original fault.
FixHub compared with the alternatives
PINE64 Pinecil V2
The Pinecil V2 is the clearest lower-cost, open-source-oriented alternative. PINE64 documents USB-C PD, DC barrel input, external-battery support, motion detection, sleep modes and up to 24V/88W operation. It uses TS100-style tips, giving buyers a broad accessory ecosystem.
Pinecil offers more flexible power inputs, stronger developer appeal and generally greater tip choice. FixHub offers higher advertised maximum power, a dedicated 55Wh battery station, iFixit’s repair documentation and a more integrated portable system. PINE64 also warns buyers about counterfeit Pinecils and recommends its official stores or listed authorized sellers; current Pinecil pricing is not included here because it varies and was not verified for this comparison.
Miniware TS101 and other TS100-style irons
These compact irons suit users who want onboard controls and established third-party tip availability. They are less compelling if the priority is an integrated battery station, iFixit’s service documentation or a complete mobile repair setup. Current official pricing and availability should be checked directly before purchase.
Weller or Hakko bench stations
A conventional Weller, Hakko or comparable station remains the better fit for a fixed workbench. It generally makes more sense when you value traditional controls, a dedicated stand and established tip availability, and never need battery operation. It is not a direct portability equivalent to FixHub; the comparison is about priorities, not identical products.
Best Value
- The ultimate soldering toolkit for precision work, wherever you are.
- The Soldering Toolkit has everything you need to solder at home or on the go, housed in a durable tool roll. This kit is ideal for professionals and hobbyists alike, with high-quality tools designed for precision and convenience.
- At the core is our Power Series Portable Soldering Station, an innovative 100W Power Station, and Smart Soldering Iron combo that offers 8 hours of continuous benchtop-level soldering without access to wall power.
- Get started in no time with all the tools and accessories you'll need to solder and desolder on the go, including solder, flux, a silicone work mat, tip cleaner and desoldering braid.
Who should buy FixHub?
Buy the $79.95 Smart Soldering Iron if you already own a suitable 65W-or-higher USB-C PD supply and want iFixit’s safety features, repairability and compact form without the battery station. Do not choose it expecting cordless operation or full controls on the handle.
Buy the $249.95 Portable Soldering Station if cordless work is the central requirement. It is aimed at vehicle repair, field service, classrooms, workshops and makers who regularly leave the bench. The onboard controls, battery capacity and ability to power two irons or another USB-C device justify the premium only when those capabilities will be used.
Buy the $299.95 Soldering Toolkit if you are starting from zero and the included accessories genuinely replace purchases you would otherwise make. Existing makers who already own solder, flux, hand tools, safety equipment and consumables may get better value from the station alone.
Free tools Windows power users keep installed
One-click scans. No signup required.
Choose something cheaper if you only need an iron for occasional repairs, already have a USB-C PD supply and care more about low purchase cost or TS100-style tip availability than integrated serviceability.
Choose a conventional bench station if your work never leaves a workbench. FixHub’s premium pays for portability, battery integration, software features and repair documentation—not merely for the ability to melt solder.
Verdict
FixHub is best understood as a premium portable repair system. The Smart Soldering Iron is a capable standalone tool, but the $249.95 station is the product that makes iFixit’s concept distinctive: a battery-powered, configurable and unusually well-documented soldering setup for work away from a bench.
Its weaknesses are equally clear: the high price, software dependence, narrower tip ecosystem and runtime that will vary with actual load. For occasional users or fixed-workbench technicians, a Pinecil-style iron or conventional Weller/Hakko station may be the more rational choice. For field repairers and makers who value cordless operation and long-term serviceability, FixHub’s premium is easier to justify.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Check the official FixHub store for current regional pricing, stock and shipping restrictions before ordering.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
