Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
A concrete laundry tub is a solid, design-led utility basin that can anchor a laundry, mudroom or workshop, but its weight and made-to-order nature make planning essential. For a documented Australian example, the Odla full-size trough is listed at 60 cm long, 53 cm wide at the top, 40 cm high and 45 kg; the shallower Odla Half is 60 × 45 × 20 cm and 30 kg. Those are manufacturer specifications, not independent durability or installation test results. Choose the size around your work, confirm the floor and cabinet can carry it, and obtain the supplier’s current installation and care documents before ordering.
This guide explains what concrete changes compared with a pressed-metal or ceramic tub, how to select between full-depth and shallow formats, what to check with a plumber or builder, and how to protect the finish over time.
As an Amazon Associate I earn from qualifying purchases.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsWhat is a concrete laundry tub?
A concrete laundry tub is a utility basin cast from concrete rather than stamped metal, moulded acrylic or fired ceramic. The material gives the tub a substantial appearance and considerable mass. It is normally selected as an architectural feature as much as a place to soak clothes, wash tools or bathe a pet.
Concrete Republic describes the Odla as a solid-concrete trough made to order in Australia, with a smooth matte finish. The product page publishes dimensions, a drawing, a specification sheet and links to installation and care documents. Treat that information as the starting point for design coordination: the pages do not provide independent load testing, comparative capacity measurements or a universal installation method for every room.
Popular on Amazon
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Both tools are designed to fit into difficult to reach spaces
- Complete a wide range of applications with a high-performance motor that delivers up to 300 UWO, and an impact driver delivering up to 1,400 in-lbs of torque
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
Because the basin is rigid and heavy, installation is different from dropping a lightweight laundry sink into a standard cabinet. The supporting structure, waste connection, access for delivery and the finished floor level all need to be resolved before the tub arrives.
Why choose concrete for a laundry?
Concrete suits a laundry when you want a built-in, furniture-like focal point and are prepared to coordinate the structure and plumbing. The matte surface and monolithic form can work with timber cabinetry, tiled walls or a utilitarian utility room without looking like an afterthought.
- Visual weight: A solid trough reads as permanent joinery or architectural work rather than a replaceable appliance.
- Custom-order character: The Odla is listed as made to order in Australia, which may suit a project with a defined finish and delivery schedule.
- Deep utility use: A full-height trough is suited to soaking, hand-washing bulky items and cleaning equipment, subject to the actual internal shape and plumbing arrangement shown in the supplier’s drawing.
- Design flexibility: Concrete can be paired with wall-mounted or bench-mounted tapware, open shelving and purpose-built supports.
The trade-off is that concrete is not a lightweight, forgiving insert. Moving a 45 kg basin through a narrow doorway, lifting it onto a cabinet and aligning the waste all require more preparation than a conventional sink installation. A shallow model can reduce mass and visual depth, but it also changes how much water and washing can be handled at once; the source pages do not publish comparative capacities.
How heavy is a concrete laundry tub?
The full-size Odla is listed at 45 kg, while the Odla Half is listed at 30 kg. These figures are for the products as specified by Concrete Republic and should be used for delivery and support planning; they are not a substitute for the supplier’s current specification sheet.
| Model | Top dimensions | Bottom dimensions | Height | Listed weight | Source |
|---|---|---|---|---|---|
| Odla | 60 cm long × 53 cm wide | 60 cm long × 38 cm wide | 40 cm | 45 kg | Concrete Republic specifications |
| Odla Half | 60 cm long × 45 cm wide | 60 cm long × 38 cm wide | 20 cm | 30 kg | Concrete Republic specifications |
Plan for more than the bare product weight when checking access and support. Water, laundry, a pet or a bucket placed in the basin add temporary load, and the cabinet or frame transfers that load to the floor. Ask the supplier or a qualified builder to confirm the design load and bearing arrangement for your particular support rather than relying on a generic cabinet.
Also popular on Amazon
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
Measure the route from the delivery vehicle to the room: gates, stairs, turns, door openings and benchtop height can all be limiting. A 45 kg rigid object is awkward even when two people can technically lift it. Arrange suitable lifting equipment and personnel, and do not drag the finished surface across flooring.
The Tool Desk
Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Which size concrete laundry tub should I choose?
Choose the full-size tub when soaking depth and a generous utility basin matter more than compactness. Choose the Half when the room, cabinetry or user needs a shallower profile and you can accept less depth. The published dimensions are the reliable comparison; capacity, internal bowl geometry and working load are not stated in the cited pages.
Odla full-size
The Odla measures 60 cm in length at both the top and bottom, 53 cm across the top, 38 cm across the bottom and 40 cm high. Its tapered width and full height create a deep trough profile. Confirm the internal dimensions on the supplier’s drawing before designing a benchtop, splashback or tap position, because external measurements do not reveal usable bowl volume.
Odla Half
The Odla Half keeps the 60 cm length but reduces the top width to 45 cm, retains a 38 cm bottom width and lowers the height to 20 cm. Concrete Republic describes it as the shallower compact option. That makes it potentially easier to reach over and integrate into a low cabinet or utility bench, but do not assume it can perform every soaking task of the full-size trough.
Use a cardboard or plywood mock-up at the proposed height and footprint. Place a bucket, laundry basket and the largest item you expect to wash inside the outline. This simple exercise reveals whether the basin blocks cupboard doors, interferes with a washing-machine lid or leaves enough standing room for the person using it.
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Also popular on Amazon
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
How much space and support does installation require?
Start with the external footprint, then add space for the support, waste outlet, tap penetrations, splash protection and safe access. The Odla’s 53 cm top width is not the same as a 53 cm-deep finished cabinet once rear plumbing and a wall clearance are included.
- Set the finished levels. Mark the floor, cabinet top, basin rim and tap height on the wall. Coordinate these marks with the washing machine, dryer, shelves and any window sill.
- Design a continuous support. The cabinet, masonry plinth or steel frame must carry the basin without point-loading a thin panel. Have a builder or structural professional check the substrate, especially on a suspended timber floor.
- Provide a level bearing surface. A rigid tub can telegraph twists or gaps. Follow the supplier’s specified bedding, sealant and tolerance details rather than improvising with an unapproved adhesive.
- Coordinate plumbing before delivery. Confirm waste size, trap location, overflow arrangement if provided, tap-hole configuration and access for future servicing from the supplier’s drawing and installation guide.
- Protect the room. Cover finished floors and cabinetry, keep lifting straps away from edges and plan where the basin will rest while connections are made.
Concrete Republic links installation guides, drawings, care instructions and a specification sheet for both models. The detailed instructions were not included in the retrieved product-page content, so obtain the current documents directly and ask the supplier to resolve any conflict between the drawing, your plumber’s method and local code requirements.
How do you install a concrete laundry tub?
Installation should be treated as a coordinated building and plumbing task, not a simple sink replacement. A qualified plumber should make the waste and water connections, while the support and lifting plan should be agreed with the builder or cabinetmaker.
- Verify the order. Check model, finish, dimensions, tap-hole arrangement and delivery timing against the latest supplier documents. Inspect packaging and the basin for damage before moving it into the room.
- Confirm the opening and route. Re-measure doors, corridors, stairs and the cabinet opening. Remove obstacles and establish a safe set-down area.
- Build and level the support. Install the specified cabinet, plinth or frame. Check level in both directions and ensure the support bears where the manufacturer indicates.
- Dry-fit plumbing. Position the trap and waste so they remain accessible. Do not close a wall or cabinet panel until the plumber has confirmed alignment and leak-testing access.
- Set the tub with planned lifting. Use enough people or mechanical assistance for the listed weight. Lower it onto the prepared support without twisting or sliding it across the finish.
- Make connections and seal as specified. Use only the sealants, gaskets and bedding materials named in the supplier’s current instructions. Excess sealant can stain edges or make later removal difficult.
- Test before handover. Run water, inspect every joint, check drainage and look for movement or rocking. Correct leaks or instability before installing shelves, splashbacks or appliances around the tub.
Local plumbing rules may govern trap dimensions, drainage, waterproofing and fixture clearances. The supplier’s documents explain the product; they do not replace permits, code compliance or the judgement of licensed trades.
Free tools Windows power users keep installed
One-click scans. No signup required.
How should a concrete laundry tub be cared for?
Follow the care and maintenance guide supplied for the exact finish. In general, keep the basin free of grit, wipe spills rather than letting them dry and use only cleaners approved for the surface. Avoid treating a concrete finish as indestructible simply because the tub is heavy.
Also popular on Amazon
- Toolwiz 17-inch magnetic sweeper maintaining a load capacity of up to 8.8 pounds provides a perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, bolts, and metal shavings from workshops or garage floors.
- Convenient and portable：17” is good for home, small workshop, or small yard as it is space-saving and more reachable for narrow areas. Perfect for collecting nails or small parts in the car, under the table, and in other nooks or crannies.
- Upgraded Handle Design: The handle features a sturdy, non-telescopic design to completely prevent slipping during use. By simply adding or removing the extension poles, the height can be adjusted to 3 different lengths: 18.9" (48 cm), 32.5" (82.5 cm), and 42.5" (108 cm) from ground to top. This customizable height helps prevent back bending and muscle strain, making your cleaning tasks effortless
- Flexible wheels: Upgrade wheel screws to avoid being too tight to spin or too loose. More comfortable 3-inch rubber wheels roll smoothly on carpet, grass, concrete, and hardwood floors. Just push and pull this rolling magnet-sweeper to pick up metal nails easily.
- Lightweight materials: The magnetic nail sweeper's compact and lightweight design makes the sweeping can be done anywhere you want, Push or pull it under the furniture, passing through the workshop floor, driveway, mud, grass, and gravel.
- Rinse detergent, dye, soil and chemicals promptly so they do not sit on the surface.
- Use a soft cloth or non-abrasive pad unless the manufacturer specifically permits a stronger method.
- Do not use harsh acids, aggressive solvents, metal scouring pads or abrasive powders without written approval.
- Use a protective mat or basket when washing tools or objects that could chip an edge or scratch the finish.
- Keep the waste clear and repair drips promptly; standing water can expose the surface to prolonged staining.
- Do not apply a household sealer, wax or coating unless the supplier identifies it as compatible with the installed finish.
Ask whether periodic resealing is required, what products are approved and how to treat a mark before it becomes permanent. Those answers depend on the concrete mix and finish, so a generic internet maintenance schedule may be wrong for your tub.
What delivery time and warranty should you expect?
Art Bathrooms lists a six-to-eight-week lead time for the Odla and a two-year warranty, alongside Australian-wide shipping information. Those are retailer terms recorded on its product page, not permanent guarantees. Confirm current lead time, freight charges, delivery method, warranty exclusions and the process for reporting transit damage before paying a deposit.
A made-to-order item can affect your project sequence. Do not demolish the existing laundry or close walls around the new plumbing until the supplier confirms production and dispatch. Build contingency into the schedule for freight access, inspection and any replacement decision if damage is found on arrival.
What problems commonly occur, and how can you prevent them?
Most avoidable problems come from treating a concrete tub like a lightweight drop-in sink. The following checks address the decisions that matter before installation.
<
| Risk | Early warning | Prevention |
|---|---|---|
| Support is inadequate | Cabinet flexes, joints open or the basin rocks | Design a continuous, level support and obtain a builder’s check for the floor and frame. |
| Plumbing is inaccessible | Trap is boxed behind fixed panels | Leave a service opening and dry-fit the waste before final fixing. |
| Delivery cannot reach the room | Measurements work on paper but not around a stair or turn | Measure the complete route and plan lifting equipment before dispatch. |
| Finish is damaged | Chips, scratches or stains appear during fit-out | Protect the tub, use approved cleaners and inspect before installation. |
| Schedule slips | Demolition starts before the made-to-order date is confirmed | Get written production and freight timing and retain a usable temporary laundry. |
Is a concrete laundry tub right for your project?
It is a strong fit when appearance, permanence and a substantial utility basin justify structural and logistical planning. It is less suitable when the floor cannot be verified, access is extremely tight, the room may be reconfigured soon or you need a low-cost, easily replaceable sink.
Also popular on Amazon
- APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- The DIY Tools for Men-Men won't know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- EASY TO USE: Just two simple steps to get the job done - drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
- Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women - Men won't know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father's Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
Before ordering, record the answers to five questions: Can the route accommodate the packed basin? Can the floor and support carry the listed weight plus working loads? Does the chosen height suit every user? Is the waste accessible for service? And have you received the current installation and care documents? If any answer is uncertain, pause the order and resolve it with the supplier and licensed trades.
How we assessed the documented Odla options
The comparison above uses the manufacturer’s published dimensions, heights and weights, plus the retailer’s stated lead time and warranty. It does not claim independent durability, capacity, installation or performance testing. Where the sources are silent—such as price, internal volume and detailed structural requirements—the article leaves the point open and directs you to the current supplier documents.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Frequently Asked Questions
Can a concrete laundry tub go on a timber floor?
Possibly, but the answer depends on the floor system, support layout and the total working load. Have a qualified builder or structural professional verify the bearing arrangement using the supplier’s current weight and installation information before ordering.
Does a concrete laundry tub need to be sealed?
Do not assume so. Ask the maker whether the supplied finish includes a sealer, whether periodic resealing is required and which products are compatible; an unapproved coating can change the appearance or void care guidance.
How do I move a 45 kg laundry tub safely?
Plan the route, clear thresholds and use enough trained people or suitable lifting equipment for the rigid load. Keep the tub protected, avoid dragging it and inspect it before installation so any freight damage can be documented promptly.
Can I replace an existing laundry sink with the shallow model?
Only after checking the new rim height, waste position, tap arrangement and the tasks you perform. The Odla Half is listed at 20 cm high and 30 kg, but the source does not publish a capacity comparison, so mock up the basin and review the drawing with your plumber.
