Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Dongkuk Structures & Construction Co., Ltd. (Dongkuk S&C), ticker 100130, trades on KOSDAQ within the wider KRX group. The latest result located is its 2026 third-quarter filing summary, which reports KRW 22.4 billion in consolidated revenue, KRW 4.4 billion in operating profit and KRW 1.8 billion in net profit. Those are reported results, not estimates. A reliable, post-filing full-year 2026 analyst consensus was not verified, so the only available KRW 2,000 12-month target should be treated as dated, single-analyst evidence rather than a current market consensus.
What is Dongkuk S&C’s latest reported performance?
The November 12, 2026 quarterly summary gives the clearest starting point for any estimate discussion. It covers the quarter ended September 2026 and presents consolidated figures:
As an Amazon Associate I earn from qualifying purchases.
Recommended Free Tools
| Period and basis | Revenue | Operating profit | Net profit | Status |
|---|---|---|---|---|
| 2026 Q3, consolidated | KRW 22.4 billion | KRW 4.4 billion | KRW 1.8 billion | Reported result |
The figures come from an AWAKEPLUS summary of Dongkuk S&C’s 2026 Q3 filing. The summary describes the quarter as the company’s largest operating profit in five quarters and its first operating-profit quarter in four quarters; readers relying on those comparisons should confirm them against the original DART filing. In any case, the quarter’s profit numbers should not be folded into a forecast as though they were analyst projections.
How did 2025 compare with 2024?
Historical results show a recovery in operating profit, but not a clean basis for assuming that every subsequent quarter will remain profitable. A Korea IR Council Corporate Research Center report records 2025 consolidated revenue of KRW 119.685 billion and operating profit of KRW 6.944 billion, compared with a KRW 5.534 billion operating loss in 2024. The report also says controlling-owner net income remained negative in 2025.
Popular on Amazon
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Both tools are designed to fit into difficult to reach spaces
- Complete a wide range of applications with a high-performance motor that delivers up to 300 UWO, and an impact driver delivering up to 1,400 in-lbs of torque
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
| Fiscal year | Consolidated revenue | Operating profit | How to use the figure |
|---|---|---|---|
| 2025 | KRW 119.685 billion | KRW 6.944 billion | Reported historical result |
| 2024 | Not specified in the cited summary | KRW -5.534 billion | Reported historical result |
For the detailed historical context, see the Korea IR Council Corporate Research Center report. The 2025 numbers are not a full-year 2026 estimate, and the 2026 Q3 result is not a full-year result.
What analyst estimate is available for 100130?
The estimate evidence available is limited. An Investing.com consensus page showed a neutral rating, one analyst, one hold recommendation and an average 12-month target of KRW 2,000. The search result was crawled roughly three months before the available data’s November 13, 2026 date. It therefore does not establish a current target after the Q3 filing, and one analyst is not a broad consensus.
Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minutePC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Also popular on Amazon
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
No dependable, post-Q3 full-year 2026 consensus for revenue, operating profit or net income was verified in the available material. Avoid presenting the KRW 2,000 figure as “the market target” without checking the live page and its publication date. Price targets can also refer to a different date, share-price reference or corporate-action adjustment than the reader expects.
How should you evaluate a Dongkuk S&C forecast?
Use the following checks before treating any number as decision-useful:
Also popular on Amazon
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
- Check the date. Give priority to forecasts issued after the November 12, 2026 Q3 release.
- Count contributors. Separate a single analyst’s view from a multi-analyst consensus; record the number of estimates.
- Match the metric. Revenue, operating profit and net income answer different questions. A target price is not an earnings forecast.
- Confirm the accounting basis. Make sure the estimate is consolidated, rather than separate-company, when comparing it with the reported figures above.
- Reconcile actuals and forecasts. Label each number as reported, guidance or projected, and check whether a forecast was revised after the latest filing.
Dongkuk S&C operates in industrial construction and wind-tower-related activity, so project timing, order execution and margins can make quarterly profit volatile. No verified order-book forecast or management guidance was published to justify a more precise 2026 number.
Is “KRX:100130” the correct market identifier?
Yes, with a qualification. Dongkuk S&C is identified as ticker 100130 on KOSDAQ; “KRX” is the broader Korea Exchange designation. Do not confuse it with other similarly named Dongkuk steel businesses. A market-data page such as Google Finance’s 100130 KOSDAQ listing can help confirm the ticker, but it does not replace the company’s filings for earnings figures.
Also popular on Amazon
- Toolwiz 17-inch magnetic sweeper maintaining a load capacity of up to 8.8 pounds provides a perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, bolts, and metal shavings from workshops or garage floors.
- Convenient and portable：17” is good for home, small workshop, or small yard as it is space-saving and more reachable for narrow areas. Perfect for collecting nails or small parts in the car, under the table, and in other nooks or crannies.
- Upgraded Handle Design: The handle features a sturdy, non-telescopic design to completely prevent slipping during use. By simply adding or removing the extension poles, the height can be adjusted to 3 different lengths: 18.9" (48 cm), 32.5" (82.5 cm), and 42.5" (108 cm) from ground to top. This customizable height helps prevent back bending and muscle strain, making your cleaning tasks effortless
- Flexible wheels: Upgrade wheel screws to avoid being too tight to spin or too loose. More comfortable 3-inch rubber wheels roll smoothly on carpet, grass, concrete, and hardwood floors. Just push and pull this rolling magnet-sweeper to pick up metal nails easily.
- Lightweight materials: The magnetic nail sweeper's compact and lightweight design makes the sweeping can be done anywhere you want, Push or pull it under the furniture, passing through the workshop floor, driveway, mud, grass, and gravel.
What is a sensible conclusion from the current evidence?
The evidence supports a cautious, improving-profit narrative rather than a precise target-price call. Dongkuk S&C reported a profitable 2026 Q3 and moved from a 2024 operating loss to a 2025 operating profit, but the available analyst snapshot is old and based on one analyst. Investors seeking a full-year 2026 estimate should obtain a newly dated source after the Q3 filing, then compare its assumptions with the original filing and subsequent disclosures.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Frequently Asked Questions
Is Dongkuk S&C the same company as Dongkuk Steel?
No. Dongkuk S&C, ticker 100130, is a separate KOSDAQ issuer from other Dongkuk-named steel companies. Confirm the legal name and ticker before comparing financial statements or prices.
Also popular on Amazon
- APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- The DIY Tools for Men-Men won't know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- EASY TO USE: Just two simple steps to get the job done - drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
- Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women - Men won't know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father's Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
Does KRW 2,000 represent a current consensus price target?
Not on the evidence available here. The figure came from a page showing one analyst and was crawled months before the latest quarterly filing, so it is a dated data point that needs live-source verification.
Are the 2026 Q3 numbers estimates or actuals?
They are reported consolidated results from the quarter ended September 2026: KRW 22.4 billion revenue, KRW 4.4 billion operating profit and KRW 1.8 billion net profit. They are not a full-year forecast.
Do these 3 things before closing this tab:
1Fix the driver behind crashes, sound loss and screen glitches2Clear out junk files and repair common Windows errors3Scan for outdated or missing drivers - takes under a minuteWhere can I verify Dongkuk S&C’s filings and ticker?
Use the company’s DART disclosures for primary financial statements and a KOSDAQ market-data listing to confirm ticker 100130. Secondary summaries can be useful, but check the original filing when comparative claims or revisions matter.
