Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Yes—according to an ERSystems product statement published on August 11, 2010, ReflectiClean was intended to be applied directly to metal surfaces painted with Kynar or other fluoropolymer-based paints. That answer is narrower than “it works on any metal.” The statement identifies a particular elastomeric coating and a particular existing finish, and it does not establish compatibility with bare, galvanized, oxidized, or differently painted metal. It is also historical evidence: the available product-specific documentation does not confirm that ReflectiClean is still manufactured, sold, or supported, and it does not provide current preparation, primer, curing, warranty, or approval requirements. Treat the direct-to-fluoropolymer statement as a specification lead that must be confirmed with current ERSystems documentation before a project is designed or coated.
What exactly did ERSystems claim about ReflectiClean?
The clearest source is an ERSystems press release carried by Building Design + Construction on August 11, 2010. It states: “It can be applied directly to metal surfaces coated with Kynar or other fluoropolymer-based paints.” The wording matters. It describes direct application over an existing fluoropolymer paint system; it does not say that ReflectiClean is suitable for every metal substrate, every factory finish, or every previously coated surface.
As an Amazon Associate I earn from qualifying purchases.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →The same release describes ReflectiClean as “a single component, water borne, elastomeric coating.” It lists the product as available in a variety of colors at that time and attributes several performance descriptions to the manufacturer, including low VOCs, tenacious adhesion, resistance to dirt pickup, and superior weathering. The release also says that surface properties improve with age. None of those statements is accompanied in the located source by a measured adhesion value, VOC number, weathering test method, service-life result, or independent laboratory report.
FacilitiesNet’s ERSystems listing independently repeats the intended substrate—metal coated with Kynar or another fluoropolymer-based paint—and echoes the water-based, low-VOC, adhesion, dirt-resistance, and weathering descriptions. It is useful corroboration of what the product was marketed to do, but it does not replace a current technical data sheet.
Popular on Amazon
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Both tools are designed to fit into difficult to reach spaces
- Complete a wide range of applications with a high-performance motor that delivers up to 300 UWO, and an impact driver delivering up to 1,400 in-lbs of torque
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
Does “directly to metal” mean bare metal is acceptable?
No. In the documented claim, “metal” is modified by “coated with Kynar or other fluoropolymer-based paints.” The existing paint layer is part of the stated substrate. Bare steel, aluminum, galvanized sheet, weathered panels, rusted areas, and panels carrying an unidentified factory finish require separate compatibility decisions.
Even when a panel appears to have a Kynar-type finish, the visible surface may include chalking, dirt, oxidation, sealant residue, repairs, or areas of a different coating. Those conditions can change adhesion and may invalidate a manufacturer’s direct-application guidance. A project team should identify the actual finish and its condition rather than infer compatibility from the panel’s color or age.
Recommended Free Tools
The statement also does not establish that ReflectiClean can bridge all defects in the old coating. It says nothing about corrosion treatment, joint sealants, fasteners, edge details, wet surfaces, or localized repairs. Those items need their own written treatment in a current system specification.
What kind of product was ReflectiClean?
Historically, ReflectiClean was presented as a single-component, water-borne elastomeric coating. “Single-component” indicates that the marketed product did not require the installer to combine separate resin and hardener components before use; it does not tell you the product’s current formulation, shelf life, recoat window, or storage limits. “Water-borne” describes the carrier system in the historical release, while “elastomeric” describes a coating intended to form a flexible film. Those labels alone are not application instructions.
The release’s performance language should be read as manufacturer claims, not as independent test conclusions. “Low VOC” is not a complete compliance determination without a current VOC value, the applicable regulatory definition, and the jurisdiction in which the work will occur. Likewise, “tenacious adhesion,” “dirt pickup resistance,” and “superior weathering” are qualitative descriptions unless a current data sheet identifies test methods, substrates, film thickness, exposure conditions, and results.
Color availability is also historical. A 2010 statement that the coating came in various colors does not guarantee today’s color range, tinting process, minimum order, or color-matching capability.
Also popular on Amazon
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
Is ReflectiClean a current, supportable specification?
The available evidence does not answer that question. The product-specific material located for this topic dates from 2010, and no current product data sheet, safety data sheet, installation guide, warranty, or verified sales listing is established by the supplied sources. That does not prove the product has been discontinued; it means a designer or contractor should not assume present availability or rely on the old statement as a complete system specification.
Before naming ReflectiClean, obtain current documents directly from ERSystems or an authorized distributor and match the product identity across every document. At minimum, request:
- an undated or currently dated product data sheet showing the exact product name and revision date;
- a current safety data sheet and the product’s VOC content under the rule used by the project jurisdiction;
- the approved substrates, including the precise wording for Kynar or other fluoropolymer finishes;
- surface-preparation requirements, including cleaning, removal of chalk, treatment of corrosion, and handling of failing paint;
- primer requirements, if any, for intact, weathered, repaired, or exposed metal;
- application limits such as temperature, humidity, dew-point clearance, substrate moisture, and weather exposure;
- wet- and dry-film requirements, coverage rates, recoat times, and cure conditions;
- details for seams, fasteners, penetrations, edges, sealants, and transitions to unlike materials;
- current color, packaging, storage, shelf-life, and availability information;
- warranty terms, exclusions, inspection obligations, and the party authorized to issue the warranty; and
- any project-specific approvals or test reports that the owner, code official, or insurer requires.
If the supplier cannot provide these documents, the direct-to-Kynar statement should remain a historical reference, not the basis for a bid, warranty, or issued-for-construction specification.
How should a team verify an existing metal roof or wall finish?
Verification should precede product selection. The goal is to establish what coating is present, whether it is sound enough to remain, and whether the current ReflectiClean documentation expressly covers it.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
- Record the panel and coating identity. Collect building records, panel manufacturer information, maintenance records, and photographs. Note where the finish is original and where repairs or touch-up coatings are visible.
- Map condition changes. Identify chalking, peeling, blistering, corrosion, oil or biological contamination, sealant residue, and areas with different gloss or color. A single elevation may contain several surface conditions.
- Ask for written compatibility confirmation. Send the finish description and condition map to the current manufacturer or authorized technical representative. Ask whether the recommendation applies without primer and whether it covers the actual repair materials present.
- Define acceptance criteria before work. The specification should state what constitutes an acceptable substrate, how unsound coating is handled, what records the applicator must keep, and who approves deviations.
- Use a controlled field evaluation when the current instructions require one. Any adhesion check, mock-up, or test area should follow the manufacturer’s written method and acceptance criteria. Do not substitute an informal spot check for a documented procedure.
These steps are due-diligence controls, not a substitute for ReflectiClean’s current instructions. The historical release does not supply a cleaning sequence, primer choice, film thickness, or cure schedule.
Which ReflectiClean claims are documented, and which remain unproven?
| Question | What the sources support | What they do not establish |
|---|---|---|
| Can it go over Kynar-painted metal? | The 2010 ERSystems release says it can be applied directly to metal coated with Kynar or another fluoropolymer-based paint. | Compatibility with every fluoropolymer formulation, condition, repair coating, or unidentified factory finish. |
| What is the product type? | The release calls it a single-component, water-borne elastomeric coating. | Current formulation, packaging, shelf life, storage limits, or installation sequence. |
| Is it low-VOC? | The release and FacilitiesNet listing describe it as low-VOC. | A current numerical VOC value or compliance with a particular jurisdiction’s rule. |
| Does it adhere strongly and resist dirt and weathering? | Those are manufacturer performance descriptions repeated in the available listings. | Independent test results, measured adhesion, weathering duration, dirt-pickup data, or service-life guarantees. |
| Is it approved for a specific code or exposure? | No ReflectiClean approval is established by the supplied sources. | Current Miami-Dade, building-code, insurance, or owner approval. |
What does the Miami-Dade approval document prove?
It does not prove anything about ReflectiClean. The available Miami-Dade NOA 19-0325.06 covers ERSystems OneStep Plus and Acrylic 1000 Plus, not ReflectiClean. The document’s approval expired on April 22, 2024. Borrowing that number, its test scope, or its expiration status for ReflectiClean would be a product-identity error.
Also popular on Amazon
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
If a project requires a Miami-Dade Notice of Acceptance or another approval, obtain a document that names ReflectiClean and covers the proposed assembly, substrate, exposure, and installation conditions. An approval for a different coating cannot be used as a substitute merely because the products share a manufacturer.
How can a specification describe the historical claim without overpromising?
A defensible specification separates the documented compatibility statement from requirements that still need confirmation. For example:
Quick wins for a faster PC:
Repair Windows errors before they cause bigger problemsFix Now →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →“ReflectiClean may be considered for application over metal panels bearing a sound Kynar or other fluoropolymer-based finish only after the manufacturer provides current written confirmation of substrate compatibility and supplies current product, safety, preparation, application, warranty, and approval documentation. Do not apply on the basis of the 2010 marketing statement alone. Bare or differently coated metal, failed coatings, repairs, sealants, and corrosion areas require separate written treatment.”
This wording does not turn an old press release into a warranty. It also gives bidders a clear submittal obligation and prevents a contractor from silently substituting a different coating or assuming that “direct” means “without cleaning or inspection.”
For procurement, require the submittal to identify the exact manufacturer, product name, current revision dates, batch or lot information, proposed color, preparation method, application conditions, and warranty issuer. Require written clarification when the existing finish cannot be positively identified as Kynar or another fluoropolymer-based paint.
What should you do if current information cannot be obtained?
Pause the ReflectiClean option rather than filling the gaps with assumptions. The practical alternatives are to select a coating with current, accessible documentation that expressly covers the substrate, or to redesign the repair approach after the owner, designer, and coating manufacturer agree on a documented system. The historical claim can remain in the project record as background, but it should not be represented as current availability, current approval, or a complete installation method.
Also popular on Amazon
- Toolwiz 17-inch magnetic sweeper maintaining a load capacity of up to 8.8 pounds provides a perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, bolts, and metal shavings from workshops or garage floors.
- Convenient and portable：17” is good for home, small workshop, or small yard as it is space-saving and more reachable for narrow areas. Perfect for collecting nails or small parts in the car, under the table, and in other nooks or crannies.
- Upgraded Handle Design: The handle features a sturdy, non-telescopic design to completely prevent slipping during use. By simply adding or removing the extension poles, the height can be adjusted to 3 different lengths: 18.9" (48 cm), 32.5" (82.5 cm), and 42.5" (108 cm) from ground to top. This customizable height helps prevent back bending and muscle strain, making your cleaning tasks effortless
- Flexible wheels: Upgrade wheel screws to avoid being too tight to spin or too loose. More comfortable 3-inch rubber wheels roll smoothly on carpet, grass, concrete, and hardwood floors. Just push and pull this rolling magnet-sweeper to pick up metal nails easily.
- Lightweight materials: The magnetic nail sweeper's compact and lightweight design makes the sweeping can be done anywhere you want, Push or pull it under the furniture, passing through the workshop floor, driveway, mud, grass, and gravel.
Do not issue a blanket instruction to “coat all metal with ReflectiClean.” Limit any consideration to identified fluoropolymer-painted panels and make acceptance conditional on current written confirmation. If the product name appears in an old maintenance specification, verify that the material supplied today is the same product and not a similarly named or reformulated coating.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What are the key takeaways for owners and contractors?
- The documented answer is yes, but only for the stated substrate: metal painted with Kynar or another fluoropolymer-based paint.
- The evidence is a 2010 manufacturer release and a corresponding FacilitiesNet listing, not a current installation manual or independent performance study.
- Low VOC, adhesion, dirt resistance, weathering, and improving surface properties are attributed claims; no numerical results were located.
- Current availability, preparation, primer, thickness, cure, warranty, and approvals remain to be confirmed.
- The Miami-Dade approval available for review is for OneStep Plus and Acrylic 1000 Plus and cannot be assigned to ReflectiClean.
- A current manufacturer data sheet and written compatibility confirmation should be conditions of specification, bidding, and installation.
Frequently asked questions
Does the statement cover galvanized steel or aluminum with no factory coating?
No. The cited wording ties the recommendation to metal that is already coated with Kynar or another fluoropolymer-based paint. Uncoated or differently coated metal needs a separate, current compatibility determination.
Is ReflectiClean still sold?
The supplied evidence does not verify current manufacture or distribution. Ask ERSystems or an authorized distributor for a current product data sheet, safety data sheet, and written confirmation that the exact product is available for the intended project.
Can a contractor rely on the 2010 release as application instructions?
No. The release establishes a historical substrate claim but does not provide preparation, primer, film-build, weather, curing, or warranty requirements. Those controls must come from current manufacturer documentation.
Can the Miami-Dade NOA for other ERSystems coatings be included in a ReflectiClean submittal?
Not as evidence of ReflectiClean approval. The cited NOA names OneStep Plus and Acrylic 1000 Plus and expired April 22, 2024; a ReflectiClean submittal needs a document that identifies ReflectiClean and the relevant assembly.
What is the safest way to handle an old specification that names ReflectiClean?
Keep the historical product reference, but make use conditional on current identity, availability, substrate compatibility, preparation instructions, warranty, and required approvals. If those documents cannot be obtained, propose a currently documented system instead of assuming the old specification remains valid.
Also popular on Amazon
- APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- The DIY Tools for Men-Men won't know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- EASY TO USE: Just two simple steps to get the job done - drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
- Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women - Men won't know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father's Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
Frequently Asked Questions
Does the statement cover galvanized steel or aluminum with no factory coating?
No. The cited wording ties the recommendation to metal that is already coated with Kynar or another fluoropolymer-based paint. Uncoated or differently coated metal needs a separate, current compatibility determination.
Is ReflectiClean still sold?
The supplied evidence does not verify current manufacture or distribution. Ask ERSystems or an authorized distributor for a current product data sheet, safety data sheet, and written confirmation that the exact product is available for the intended project.
Can a contractor rely on the 2010 release as application instructions?
No. The release establishes a historical substrate claim but does not provide preparation, primer, film-build, weather, curing, or warranty requirements. Those controls must come from current manufacturer documentation.
Can the Miami-Dade NOA for other ERSystems coatings be included in a ReflectiClean submittal?
Not as evidence of ReflectiClean approval. The cited NOA names OneStep Plus and Acrylic 1000 Plus and expired April 22, 2024; a ReflectiClean submittal needs a document that identifies ReflectiClean and the relevant assembly.
What is the safest way to handle an old specification that names ReflectiClean?
Keep the historical product reference, but make use conditional on current identity, availability, substrate compatibility, preparation instructions, warranty, and required approvals. If those documents cannot be obtained, propose a currently documented system instead of assuming the old specification remains valid.
