Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Fix the driver behind crashes, sound loss and screen glitches3Repair Windows errors before they cause bigger problemsA chimney style range hood is one of the few kitchen upgrades that changes both the look of the room and the way the room works. The best one for your kitchen is not simply the most powerful or most expensive hood. It is the hood that fits the cooking surface, captures smoke and moisture well, routes air outdoors correctly, stays quiet enough that you will actually use it, and looks intentional with the cabinetry, ceiling height, backsplash, and range.
For many American kitchens, the practical sweet spot is a ducted wall-mount chimney hood between 300 and 600 CFM over a 30- to 36-inch range. Light electric or induction cooking may be comfortable closer to 200 to 350 CFM. A pro-style gas range, island cooktop, wok burner, griddle, long duct run, or open floor plan can push the right answer higher. Once you move above 400 CFM, many IRC-based jurisdictions require makeup air planning, so bigger is not automatically better.
On our job sites, we treat a chimney hood as a small mechanical system, not just an appliance. The visible hood matters, but the duct size, wall framing, exterior cap, damper, wiring, filter access, and commissioning determine whether the homeowner gets a quiet, effective kitchen or a good-looking stainless box that barely pulls steam off the front burners.
What Is a Chimney Style Range Hood?
A chimney style range hood is typically a wall-mounted or island-mounted hood with a vertical chimney cover above it. That cover hides the exhaust duct as it runs upward toward the ceiling, attic, roof, or exterior wall. The style works best when the range or cooktop is not under upper cabinets, because the hood and chimney become part of the kitchen architecture.
#1 Best Overall
- Modern Design: IKTCH Wall Mount Range Hood is made from stainless steel, which has an elegant appearance and comes with remote control. The novel gesture sensing function gives you a whole new experience
- Powerful Airflow: Maximum 900 CFM large airflow with good balance fans efficiently removes large amounts of smoke and cooking odors with ease from the air in your kitchen
- Ultra-Quiet Operation: Customize your kitchen stove vent with the 4-speed setting to play with the suction and noise level. The noise level is at 40 decibels on the lowest setting and only 65dB max noise level
- Bright Energy Saving Lamps: 2pcs 3W LED lights, adjustable brightness to meet your cooking need, can also save energy in your kitchen while emitting enough lights
- Superior Filtration: Includes 2 matching dishwasher safe and easy removable stainless steel permanent filters to trap cooking grease and oil
Most residential chimney hoods come in 24-, 30-, 36-, 42-, and 48-inch widths, with 30 and 36 inches being the most common in standard remodels. The hood body may be stainless steel, black stainless, matte black, powder-coated steel, copper, brass-accented metal, or a concealed liner inside a custom wood, plaster, drywall, or cabinet-style surround.
There are two main mounting types. A wall-mount chimney hood sits against a wall above a range or cooktop. An island chimney hood hangs from the ceiling above an island cooktop. Island hoods usually need more careful planning because smoke can drift from all sides, the hood is more visible, and the ceiling structure must safely support the appliance.
The Best Chimney Hood Is Usually Ducted
If the house allows it, choose a ducted chimney hood. A ducted hood exhausts grease, heat, steam, odors, and combustion byproducts outdoors. A ductless or convertible hood pulls air through grease and charcoal filters, then returns that air to the kitchen. Charcoal filters can reduce odors, but they do not remove moisture, heat, or gas combustion pollutants from the home.
That difference matters most in kitchens with gas cooking, high-heat searing, frequent frying, or open layouts where cooking air spreads quickly into living spaces. A ductless hood may be the only realistic option in some condos, interior kitchens, or buildings where exterior penetrations are prohibited. In a detached home or major kitchen remodel, though, we normally try hard to create a proper duct route.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →IRC-based mechanical codes commonly require domestic kitchen exhaust ducts to discharge outdoors through a smooth, airtight, independent duct with a backdraft damper. The duct should not terminate in an attic, crawl space, wall cavity, garage, or soffit cavity. That is not just a code detail. Dumping humid, greasy kitchen air into hidden spaces can contribute to odor, staining, mold risk, and building damage.
How Much CFM Do You Need?
CFM means cubic feet per minute, or how much air the hood fan can move under rated conditions. Many homeowners shop by CFM first, but the better starting point is the cooking appliance: width, fuel type, burner output, manufacturer ventilation guidance, and cooking habits.
For normal home cooking, 200 to 350 CFM is often enough when the hood is properly sized, mounted at the correct height, and ducted with a short, clean route. A common rule of thumb for gas cooking is to divide total burner BTUs by 100. A 30-inch gas range with 40,000 total BTUs points toward about 400 CFM. A larger pro-style range with 60,000 to 90,000 BTUs can move the recommendation into the 600 to 900 CFM range.
Those numbers are starting points, not engineering law. A quiet 400 CFM hood with good depth, proper ducting, and a usable medium speed can outperform a loud 600 CFM hood connected to a restricted duct. Installed airflow can be much lower than product literature suggests when ducts are undersized, too long, crushed, sharply turned, or blocked by poor exterior caps. Research on installed residential exhaust devices has found measured maximum airflow at 70 percent or less of literature values in many cases, which lines up with what we see in the field when ventilation is treated as an afterthought.
Practical CFM Targets
| Kitchen Setup | Typical Hood Width | Practical CFM Range | Notes |
|---|---|---|---|
| 30-inch electric or induction range | 30 to 36 inches | 200 to 350 CFM | Good fit for normal boiling, baking, and light sauteing. |
| 30-inch standard gas range | 30 to 36 inches | 300 to 400 CFM | Check total burner BTUs and manufacturer guidance. |
| 36-inch gas range | 36 to 42 inches | 400 to 600 CFM | May trigger makeup-air requirements above 400 CFM. |
| Pro-style gas range or frequent high-heat cooking | 42 to 48 inches | 600 to 1,200 CFM | Plan duct size, makeup air, and noise control before ordering. |
| Island cooktop | At least 6 inches wider than cooking surface when possible | 400 to 900 CFM | Needs more capture area because cross-drafts affect performance. |
| Ductless-only condo kitchen | Match range width | Manufacturer-rated recirculating mode | Helps with grease and odor, but does not exhaust heat or moisture outdoors. |
Width, Depth, and Mounting Height Matter as Much as CFM
A hood should be at least as wide as the cooking surface. A 30-inch hood over a 30-inch range is acceptable for many standard kitchens. For better capture and a more finished look, especially in premium remodels, a 36-inch hood over a 30-inch range often works better because it provides roughly 3 inches of overhang on each side.
Island hoods benefit from more width because they do not have a back wall helping contain smoke and steam. If the island layout allows it, we like the hood to be about 6 inches wider than the cooking surface. For a 36-inch island cooktop, that can mean a 42-inch hood.
Depth is just as important. A shallow hood may look sleek but miss smoke rising from the front burners. Capture is generally better from back burners than front burners, so we tell homeowners who do a lot of searing or frying to use the back burners when practical. It is a simple habit that improves performance without changing the appliance.
Rank #2
- EFFICIENT AIRFLOW: 380 CFM removes smells and odors with ease for a clean kitchen. Ducted range hood vents outside and away from your home. Converts to ductless range hood with Carbon Filter Kit Purchase Part # CFK1-TM (sold separately). Noise level as low as 45 dB on lowest fan speed with rigid ducting (sold separately) under optimal conditions; range hood comes with flexible ducting for convenient installation
- EASY-TO-CLEAN FILTERS: Part of the Vista Collection. Cosmo ARC-FLOW Permanent Filters are dishwasher-safe and extremely durable. No need to replace these range hood filters, simply drop in the dishwasher for easy maintenance and cost savings
- SOFT TOUCH CONTROLS: Range hood equipped with soft touch control panel to manage multiple functions, including fan speed, lights and power
- ENERGY-EFFICIENT LIGHTS: The energy-efficient, 2-watt LEDs are long-lasting and provide the range hood with bright, high lumen lighting for better visibility at night
- 2-YEAR LIMITED PARTS: Our customer support team is based proudly in the USA. Range Hood Product Dimensions: 30 in. (W) x 19.75 in. (D) x Adjustable 25.6 in. - 39.4 in. (H). Electrical: 120V/60Hz, 3-prong plug. Duct Size: 6 in
Mounting height depends on the hood manufacturer and cooking appliance, but many chimney hoods land around 24 to 36 inches above the cooktop. Gas ranges and high-output burners often require more clearance than electric or induction units. Custom wood or plaster surrounds need special care because the decorative enclosure is not the ventilation system. Use a tested metal liner or insert, maintain required clearances, and keep service access to filters, lights, and controls.
Recommended Free Tools
Wall-Mount vs Island Chimney Hoods
A wall-mount chimney hood is usually the best value when the range sits on an exterior wall or a wall with a clean path to the roof. It is easier to frame, easier to duct, and usually quieter because the duct route can be shorter. Visually, it creates a strong centerline above the range and pairs well with tile, slab stone, plaster, or a full-height backsplash.
An island chimney hood makes a stronger design statement, but it is less forgiving. The hood is visible from all sides, the duct often has to pass through ceiling framing or attic space, and the installer has to confirm solid overhead support. Island hoods are also more exposed to air movement from people walking, HVAC registers, ceiling fans, and open windows. For that reason, we do not undersize them.
If you are planning a new island cooktop, decide on ventilation before finalizing ceiling lights, joist work, and island dimensions. Moving a pendant light is easy. Rerouting a 6-, 8-, or 10-inch metal duct after drywall and cabinetry are finished is not.
Best Chimney Hood Styles for 2026 Kitchens
Stainless steel is still the default workhorse. It is durable, widely available, easy to coordinate with appliances, and available from budget to premium price points. For rental properties, busy family kitchens, and clean contemporary remodels, a simple stainless wall-mount chimney hood is still hard to beat.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Matte black and black stainless hoods are popular in kitchens with white oak, walnut, painted cabinetry, soapstone-look counters, or black window frames. They hide some fingerprints better than polished stainless but can show dust, scratches, and cleaning streaks depending on the finish.
Custom wood chimney surrounds work well in traditional, transitional, and furniture-style kitchens. The key is to treat the visible wood as a surround, not the hood itself. Inside, you still need a properly sized metal liner or insert, grease filters, lighting, and a duct path that matches the blower requirements.
Plaster and drywall-wrapped chimney hoods are showing up more often in high-end remodels because they can look built into the architecture instead of applied like an appliance. They pair well with slab backsplashes, arched forms, warm minimal cabinetry, and concealed appliance layouts. The tradeoff is coordination: framing, fire clearances, liner dimensions, access panels, finishing, and future service all need to be thought through before rough-in.
Brass, copper, and mixed-metal hoods can be beautiful, but they should be selected with maintenance expectations in mind. Some finishes patina. Some lacquered finishes scratch. Some premium metals require specialized cleaning. We discuss that before ordering because a hood is directly above heat, steam, grease, and cleaning products.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →Cost to Install a Chimney Range Hood in 2026
For 2026 budgeting, a basic vent hood installation is commonly in the $564 to $1,030 range, depending on ZIP code, site conditions, size, and options. Replacement work often lands around $300 to $850 when the existing duct and electrical are already suitable. A new range hood installation with a new outlet and ductwork is often closer to $650 to $2,100.
Wall-mounted chimney-style hoods commonly run about $700 to $1,000 installed for straightforward material-and-labor projects. Broader ducted installations with electrical modifications, wall or roof penetrations, finish repair, and access challenges commonly reach $650 to $2,500. Custom surrounds, premium liners, long duct runs, masonry coring, roof flashing, or makeup-air systems can move the total into the $2,000 to $5,000-plus range.
Rank #3
- HIGHT QUALITY STOVE VENT HOOD: Made of Premium 430 grade brushed stainless steel, classical pyramidal hood fits most kitchen decors. Optional Carbon Filter Kit available for ductless (Purchase Part # USGDCF-Y))
- 450 CFM AIR-FLOW: with 3-speed push button control, quiet 55 dB noise level, energy-efficient LED lighting. Your ideal kitchen ventlator.
- WALL MOUNT CHIMNEY-STYLE KITCHEN HOOD: The unit dimensions 29.3" W x 18.3" L x 36.3" H, adjustable chimney from 15-3/4 inch to 29-1/2 inch (40cm-75cm), fit 7.5-8.5 ft ceiling. Extend up to 10ft ceiling with extension, need to sold separately (Part #USGDEX-01)
- REUSABLE RANGE HOOD FILTERS: 5-layer aluminum mesh filters, removable and reusable, easy to clean.
- 5 YEAR LIMITED PARTS WARRANTY: Professional team to offer you efficient service. Includes hardware, instructions, duct pipe, air backdraft damper, and chimney flue duct covers. 6" round top vent.
| Project Type | Typical 2026 Cost | What Drives the Price |
|---|---|---|
| Simple replacement hood | $300 to $850 | Existing duct, existing power, similar size, minimal finish repair. |
| Basic chimney hood installation | $700 to $1,500 | Standard 30- or 36-inch hood, short duct route, normal wall mounting. |
| New ducted installation | $650 to $2,500 | New duct, outlet, exterior cap, drywall repair, cabinet or soffit adjustments. |
| High-CFM or pro-style setup | $1,500 to $4,000+ | Larger duct, heavier hood, roof work, remote blower, makeup-air planning. |
| Custom wood, plaster, tile, or metal surround | $2,000 to $5,000+ | Finish carpentry, framing, liner, clearances, premium materials, service access. |
Unit-only pricing is broad. Big-box wall-mount hoods can run under $100 on the low end and above $5,000 for premium or specialty models. Many mainstream stainless chimney hoods fall between $200 and $900 before labor. That range is why we do not recommend choosing from price alone. A $500 hood with a clean duct route can be a better buy than a $1,500 hood choked down through the wrong duct.
Ductwork Details That Make or Break Performance
The duct should stay as short, straight, smooth, and full-size as the hood manufacturer requires. If the hood calls for a 6-inch round duct, do not reduce it to 4 inches because the wall cavity is tight. If the hood calls for 8 inches, plan for 8 inches. Reducing duct diameter increases resistance, noise, and grease buildup while lowering actual airflow.
PC Slower Than It Used to Be?
A free scan shows the junk files, broken settings and background clutter dragging Windows down - then fixes them in one click.Free scan · Windows 10 & 11Crashes, No Sound, or Screen Glitches?
Random freezes, missing sound and display glitches usually trace back to one bad driver. Find and replace yours safely.Free scan · under a minuteEvery elbow matters. A short vertical run through an exterior wall or roof usually performs better than a long horizontal route with multiple turns. Exterior caps should be sized for the duct, include a working damper, and be located where exhaust will not immediately re-enter the house through windows, doors, soffit vents, or fresh-air intakes.
During rough framing, we install blocking where the hood bracket will land. Chimney hoods are heavier than under-cabinet hoods, and custom surrounds can add significant weight. Island hoods need ceiling structure that can carry the unit safely without vibration. Drywall anchors are not a plan for a heavy hood.
At startup, we verify the airflow direction at the exterior cap, check that the damper opens and closes, listen for vibration, confirm that filters remove easily, and document the final model and CFM for homeowner records. That last step helps later if the home is sold, inspected, or modified.
Noise: The Spec Homeowners Regret Ignoring
Noise is one of the biggest reasons people stop using their range hood. Many buyers compare maximum CFM and ignore sones, blower design, and speed settings. A loud hood may look impressive in the showroom and still be miserable during a normal weeknight dinner.
Compare sound ratings at normal low and medium speeds, not just the highest boost setting. A hood that is quiet at 200 to 300 CFM and only loud on boost is often more useful than a hood that roars at every setting. Multi-speed controls, baffle filters, larger ducts, and remote or inline blowers can all help.
For open-concept kitchens, noise matters even more because the range hood competes with conversation, TV, and adjacent living areas. We would rather see a homeowner use a properly designed medium-speed hood every time they cook than own a high-CFM hood they avoid because it sounds harsh.
Makeup Air, Safety, and Permits
Makeup air is replacement air brought into the home when the range hood exhausts indoor air outdoors. Under IRC M1503.6, hoods over 400 CFM commonly trigger makeup-air provisions. The makeup air is generally supplied at approximately the exhaust rate and controlled to open automatically when the hood operates.
This matters because a powerful hood can depressurize a tight house. That can cause comfort problems, make doors harder to open, pull air down chimneys or flues, and create backdrafting risks with combustion appliances such as gas water heaters, furnaces, boilers, and fireplaces. In cold or hot climates, makeup air may also need a tempering strategy so the hood does not dump uncomfortable outdoor air into the kitchen.
Rank #4
- 700CFM AIR-FLOW：Our range hood 30-inch stainless steel has 700CFM airflow can easily eliminate kitchen smoke steam odors and heat. Only 65dB max noise making your kitchen clean, quiet and elegant.
- PREMIUM QUALITY: Wall mount exhaust hood is made of hard 430 grade, 20-Gauge thickness brushed stainless steel is not easy to damage. Featured advanced touch screen allows you to easily control switches, 2 LED lights, 3 speeds air suction, even clock.
- DISHWASHER SAFE FILTERS: Reusable stainless steel filter to trap cooking grease and oil with ease, washing in the dishwasher can save you time to take care of your family, spend less time getting your kitchen cleaner.
- EASY WALL MOUNT INSTALLATION: Ducting mode work with 6 inch round vent, convenient vent outside.Kitchen exhaust fan comes with adjustable chimney, can be installed 7.5 to 9 ft ceiling height. Extend up to 10ft ceiling with extension, need to sold separately (Part #USGDEX-01)
- WARRANTY & PACKAGE: Stove vent hood provides 3-year limited parts warranty against all defects. Including prong plug, chimney cover, manual, hardware,6.5ft exhaust pipe, and air backdraft damper, any installation details will show in the manual.
Permits vary by city and county, but adding a new ducted range hood can involve mechanical, electrical, roofing, or building inspections. A simple like-for-like replacement may be handled differently than cutting a new roof penetration or adding a 900 CFM blower. Before ordering the hood, confirm local requirements, especially if the home is part of an HOA, condo association, historic district, or energy-code jurisdiction with specific ventilation documentation.
When to DIY vs When to Hire a Pro
A handy homeowner may be able to replace an existing chimney hood when the new unit is similar in size, the duct is already correct, the electrical connection is legal and accessible, the wall has proper blocking, and no cabinet, tile, roof, or exterior work is required. Even then, it is a two-person job because hoods are awkward to lift and align.
Hire a pro when you need new ductwork, a new outlet, hardwiring, a roof or exterior wall penetration, structural blocking, an island hood, a custom surround, a high-CFM blower, or a makeup-air system. Also bring in help if the home has atmospheric combustion appliances, because backdrafting is not something to guess about.
Most straightforward replacements take 2 to 5 hours. A new ducted chimney hood can take a full day or longer once layout, cutting, electrical, exterior cap installation, sealing, mounting, and finish repair are included. Custom plaster, tile, or millwork hoods are usually spread across multiple trade visits because framing, mechanical rough-in, finish work, and final appliance installation happen in sequence.
Free tools Windows power users keep installed
One-click scans. No signup required.
Best Choices by Kitchen Type
Standard Wall Range
For a typical 30-inch wall range, choose a 30- or 36-inch ducted chimney hood in the 300 to 400 CFM range. If the duct can exit directly through the wall behind or above the hood, this is one of the most cost-effective setups. Stainless, matte black, or a simple cabinet-style surround are all practical choices.
Pro-Style Gas Range
Start with the appliance specs. Many pro-style ranges need 600 CFM or more, and some need wider hoods with deeper capture areas. Plan the duct diameter, blower location, and makeup air before the cabinets are ordered. This is where trying to save a few inches in the design can create an expensive performance problem.
Island Cooktop
Use a wider hood when possible, pay close attention to ceiling structure, and keep HVAC registers away from the cooking zone. A 36-inch island cooktop often deserves a 42-inch hood. If the ceiling is high, confirm that the chimney extension kit fits before purchasing.
Open-Concept Kitchen
Prioritize quiet operation and real capture. Open rooms make odors and noise more noticeable. A moderately powerful hood with good capture and a quiet medium speed often serves the space better than an oversized hood that creates comfort and noise complaints.
Tall Ceiling Kitchen
Check chimney cover dimensions early. Many standard chimney kits are designed around common 8- to 9-foot ceilings. A 10-, 11-, or 12-foot ceiling may require an extension kit, custom surround, or different hood model. This is a common ordering mistake.
Ductless-Only Condo
Choose a high-quality convertible chimney hood with accessible grease and charcoal filters, and budget for filter replacement. Be realistic: it can help with grease and odor, but it will not remove heat, steam, or combustion gases outdoors. If you cook heavily, induction may be a better long-term match for a ductless-only kitchen.
Best Value
- 【Powerful Air-frow + Utral Quiet Motor】: Tieasy Range Hood with anti-fire housing premium safe motor that can reach 700 CFM. The range hood 30 inch airflow system can reach Max Energy Efficiency class of A++ and the lowest noise level can control at 40db, makeing your life become more quiet and simple.
- 【Curved Glass + Stainless Steel Brushed Finish】: The classic 30 inch range hood is made of 6mm curved glass and high-end 430 stainless steel with brushed finish that is easy to clean due to the range hood being non-magnetic and rust proof. Perfer angle not only can protect your head from hitting but also can match your kitchen perfectly for any contemporary modern style such as European style, minimalist style to give your kitchen a new look.
- 【Touch Control Display+ Dishwasher Safe Filters】: Vent Hood features a easy clean and sleek buttonless touch sensitive control panel, just lightly touch with your finger and the display will light up, The professional vent hoods 30 inch has two baffle filters to protect your hood by trapping particles of grease, simply drop in the dishwasher for easy maintenance and cost savings, ensuring a perfect airflow and efficient ventilation of the entire kitchen.
- 【 Dual Ventliation Mode+Adjustale Chimney】: Tieasy range hood can be as ductd or ductless, ducted range hood exhaust air to the outside. Ductless range hood specifically designed for room no extractor duct. Optional Carbon Filter Kit available for ductless (Purchase Part # CF-G). This kitchen vent hood comes with adjustable chimney cover, perfect for 7.5-ft ceiling or 8.5-ft ceiling.
- 【Easy Installation＋3 Year Limited Parts Warranty】: This kitchen hood dimension: 30 in. W x 18.5 in. D x Adjustable 21.5 in. - 40.5 in. H. Includes hardware, instructions, air backdraft damper, oil cup, chimney flue duct covers and a 6.5 foot expandable ducting for vent outsides. Our aim is to provide you with good products and friendly customer service. Please contact our tech support team when you need our assistance with our kitchen range hoods.
Our Job-Site Checklist Before Ordering
Before we approve a chimney hood for a remodel, we confirm the cooking appliance width and BTUs, hood width and depth, mounting height, duct diameter, duct route, exterior termination, electrical location, ceiling height, wall or ceiling blocking, finish clearances, filter access, and whether makeup air applies. We also check whether the homeowner wants the hood to disappear into the design or stand out as a focal point.
The cleanest projects make these decisions before cabinet shop drawings are final. Once cabinets, tile, slab backsplash, ceiling framing, and lighting are installed, every change costs more. A chimney hood is visible enough to deserve design attention and mechanical enough to deserve trade coordination.
Bottom Line
The best chimney style range hood for most kitchen remodels is a ducted wall-mount model sized at least as wide as the range, usually 300 to 600 CFM for common residential cooking, installed with a short full-size duct, a working backdraft damper, solid blocking, and noise ratings you can live with. For heavier gas cooking, island layouts, tall ceilings, and custom surrounds, the right hood is less about picking a popular model and more about designing the whole ventilation assembly.
If you are remodeling the kitchen anyway, decide on the hood early. It affects framing, electrical, ductwork, backsplash layout, cabinetry, ceiling details, HVAC coordination, and sometimes permits. Get those pieces right, and the chimney hood becomes what it should be: a strong design feature that also keeps the kitchen cleaner, safer, and more comfortable.
Frequently Asked Questions
What is a chimney style range hood?
A chimney style range hood is a wall-mounted or island-mounted hood with a vertical chimney cover that hides the exhaust duct. It is commonly used where the range is not under upper cabinets.
Is a ducted chimney range hood better than ductless?
Yes, when ducting is feasible. A ducted hood exhausts grease, heat, steam, odors, and combustion byproducts outdoors. A ductless hood filters some grease and odors but returns heat and moisture to the kitchen.
How many CFM do I need for a chimney range hood?
Many standard 30- to 36-inch residential ranges work well with 300 to 600 CFM. Light electric or induction cooking may need 200 to 350 CFM, while high-output gas ranges may require 600 CFM or more.
How much does it cost to install a chimney range hood in 2026?
A straightforward installed ducted chimney hood commonly lands around $800 to $1,500. Simple replacements may be $300 to $850, while new ductwork, electrical changes, custom surrounds, or makeup air can push the project to $2,000 to $5,000 or more.
Does a range hood over 400 CFM require makeup air?
In many IRC-based jurisdictions, yes. Hoods over 400 CFM commonly require makeup air supplied at roughly the exhaust rate and controlled to open automatically when the hood operates.
Should my range hood be wider than my stove?
At minimum, the hood should be as wide as the cooking surface. For better capture, especially with heavy cooking or island installations, about 3 inches of overhang on each side is often a better target.
Quick wins for a faster PC:
Scan for outdated or missing drivers - takes under a minuteDriver Scan →Clear out junk files and repair common Windows errorsFree Scan →Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
