Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Construction on a 1.002-mile section of Alabama State Route 204 in Jacksonville is scheduled to bring periodic lane closures and traffic interruptions through a projected October 31, 2027 completion, weather permitting. The work runs from the Nisbet Lake Road junction, east of Gadsden Road, to the SR-21 intersection near Jacksonville State University. The planned November 2, 2026 start date has passed, but the available notices do not identify the exact phase, lane arrangement or closure hours in effect on November 13.
ALDOT lists the project as active. Drivers should plan for changing work-zone conditions rather than assume a particular lane is closed every day.
As an Amazon Associate I earn from qualifying purchases.
Where is the SR-204 construction?
The project is on SR-204 in Jacksonville, in east Alabama. ALDOT’s project record defines the limits as the junction of Nisbet Lake Road to the junction of SR-21, a length of 1.002 miles. WBRC reports the corresponding mile-marker range as 8.618 to 9.620, with the work east of the Gadsden Road intersection. The corridor is near Jacksonville State University.
Use the ALDOT project record for the official route limits and project number, STPAA-0204(516).
Popular on Amazon
- Ergonomically Designed: Work in tight areas with a compact design that gets into tough spots
- Both tools are designed to fit into difficult to reach spaces
- Complete a wide range of applications with a high-performance motor that delivers up to 300 UWO, and an impact driver delivering up to 1,400 in-lbs of torque
- Both the DEWALT impact driver and drill driver feature integrated LED work lights with a convenient 20-second delay, ensuring enhanced visibility in dimly lit or challenging work areas
- One-Handed Loading - Keep one hand free with a 1/4 in. hex chuck that accepts 1 in. bit tips
What work is ALDOT doing?
This is more than a resurfacing job. The announced scope combines roadway widening with pedestrian improvements and supporting work:
- Drainage improvements
- Widening of the existing roadway
- Resurfacing or other pavement work
- Guardrail and end-anchor installation
- Traffic-signal work
- New or refreshed traffic striping
- Pedestrian improvements along the project segment
Because crews will move through several construction phases, the traffic pattern can change as drainage, widening, paving, signal and striping activities advance.
When will lane closures and interruptions occur?
ALDOT says there will be “multiple phases of construction and periodic traffic interruptions throughout the project.” Lane closures are expected as crews perform drainage work, widen the road, resurface pavement and modify signals. The official notice does not publish a daily closure calendar, standard closure hours or a named detour.
Also popular on Amazon
- Valued Carpenter Pencil Set: You will get 2 pcs solid carpenter pencils with 26 piece 2.8 mm refills, 1 replaceable sharpener, 1 plastic storage box.The complete carpenter pencils combination allows you to finish your work faster and more easily
- Deep Hole Marker Pencil: The deep-hole construction pencils adopts 45mm elongated tip design, which is more convenient to mark in the small hole or in other tight areas that other carpenter markers cannot reach
- Carpenter Pencils with Sharpener: The sharpener is screwed into the top of the work pencil, which won't get lost either. Built-in pencil sharpener that keep the lead with pointed and smooth to Improves line of sight in fine work
- Stronger Solid Lead: This work pencil is matched with a 2.8 mm thick lead , which is much thicker and stronger during the drawing process of construction work, it will not break or damage easily
- Marks on Various Surfaces: 3 colors solid construction pencil can marks on various surfaces,such as metal, plastic, wood, paper etc. Ideals for woodworkers, contractors, craftsmen, builders, merchants and masons
The publicized start was Monday, November 2, 2026, weather permitting. That date is now past. ALDOT’s project page still shows the job as Active and gives a projected completion date of October 31, 2027, also weather permitting. Those are schedule estimates from the project record, not confirmation that a specific phase is underway today.
For a same-day trip, check a current ALDOT traffic notice or a local traffic report. The published project materials do not establish current lane-by-lane conditions, so motorists should not rely on the original start announcement to predict today’s configuration.
How should motorists travel through the work zone?
ALDOT’s guidance, quoted by WBRC, is: “Motorists should adjust arrival and departure times, observe work zone speed limits, work zone signs, and use caution in this area.” The agency also thanked drivers for their patience while the roadway is improved.
Also popular on Amazon
- 【Great Compatibility】This Katerk 1/4 inch hex shank bit holder is specifically designed for 1/4 inch hex shank drill bits. It's compatible with most 1/4 fast hex handles, hex sockets, various electric screwdrivers, and handheld screwdrivers. The bit holder makes it a valuable addition for any handyman.
- 【Secure and Safe】Built with a secure backup nut design, each drill bit holder securely locks onto your bits, ensuring they stay firmly in place. Additionally, our bit holder incorporates a high-quality steel ball rolling design that holds up to several kilograms of weight, ensuring your various drill bits don't fall off.
- 【Easy One-Handed Operation】The bit holder for impact driver allows you to change bits single-handedly, simplifying your workflow. Its multi-color design further allows for quick identification of the drill bit you need.
- 【Compact and Convenient】Thanks to its compact size, this 1/4 inch bit holder is easy to carry around. The bit holder allows for easy attachment to various tools, making this a convenient addition to your construction accessories. The Katerk bit holder is cast from high-quality alloy material, promising a long product lifespan. Despite its rugged strength, the bit holder remains lightweight, making it portable.
- 【Cool Christmas Gift For Men Stocking Stuffers】 This screwdriver bit holder, driver bit holder, impact bit holder, can be given as a gift to your loved one, especially for anyone involved in construction or electrical work. It's a must-have for stocking stuffers for men and women, tools gifts for dad, tech gadgets for men, gifts for dad, gifts for him, gifts for husband, gifts for boyfriend, cool gadgets for men, and cool gifts for dad.
- Allow extra time. Periodic interruptions may delay trips, especially during active drainage, paving or signal work.
- Follow the signs in front of you. Temporary lane markings, cones and work-zone speed limits take priority over a route you used on an earlier trip.
- Expect changing access. A lane arrangement can shift between phases; do not assume that a previous turn or shoulder movement remains available.
- Give crews and pedestrians space. Slow down, maintain a safe following distance and watch for workers, equipment and temporary pedestrian routing.
- Recheck conditions before departure. Because no daily closure schedule or detour is listed in the notices, use the latest ALDOT or local traffic information for time-sensitive travel.
What are the project’s published cost and schedule?
| Item | Published detail |
|---|---|
| Project | Traffic and pedestrian improvements to SR-204 near Jacksonville State University |
| Project number | STPAA-0204(516) |
| Location | Nisbet Lake Road junction to SR-21 junction in Jacksonville |
| Length | 1.002 miles |
| Projected cost | $8,240,554.80 |
| Planned start | November 2, 2026, weather permitting |
| Projected completion | October 31, 2027, weather permitting |
| Status in ALDOT record | Active |
Prices checked November 2026.
These figures come from ALDOT’s 2026 project record. They are planned cost and schedule figures; the notices do not report measured traffic, crash-reduction, travel-time or pedestrian-safety outcomes.
What is still unknown about current traffic?
The available announcement and project record do not say which lanes are closed now, the hours of daily restrictions, whether work is occurring on a particular block today or which alternate route is best. They also do not name a standing detour. Conditions can vary by phase and weather, so current travel decisions require a newer traffic notice or local report rather than the October announcement alone.
ALDOT’s SR-204 lane-closure notice and the WBRC report provide the published announcement and motorist guidance. Neither source supplies a live, hour-by-hour closure map.
Also popular on Amazon
- Toolwiz 17-inch magnetic sweeper maintaining a load capacity of up to 8.8 pounds provides a perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, bolts, and metal shavings from workshops or garage floors.
- Convenient and portable：17” is good for home, small workshop, or small yard as it is space-saving and more reachable for narrow areas. Perfect for collecting nails or small parts in the car, under the table, and in other nooks or crannies.
- Upgraded Handle Design: The handle features a sturdy, non-telescopic design to completely prevent slipping during use. By simply adding or removing the extension poles, the height can be adjusted to 3 different lengths: 18.9" (48 cm), 32.5" (82.5 cm), and 42.5" (108 cm) from ground to top. This customizable height helps prevent back bending and muscle strain, making your cleaning tasks effortless
- Flexible wheels: Upgrade wheel screws to avoid being too tight to spin or too loose. More comfortable 3-inch rubber wheels roll smoothly on carpet, grass, concrete, and hardwood floors. Just push and pull this rolling magnet-sweeper to pick up metal nails easily.
- Lightweight materials: The magnetic nail sweeper's compact and lightweight design makes the sweeping can be done anywhere you want, Push or pull it under the furniture, passing through the workshop floor, driveway, mud, grass, and gravel.
What should Jacksonville residents and visitors plan for?
Anyone using SR-204 between Nisbet Lake Road and SR-21 should treat the corridor as an active, multi-season work zone until ALDOT declares the project complete. The longest planning horizon is the projected October 2027 finish, but individual interruptions may be shorter or move as crews progress. Build flexibility into trips to Jacksonville State University and nearby destinations, and follow the temporary traffic control that is present when you arrive.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsFrequently Asked Questions
Is SR-204 in Jacksonville closed every day?
No daily closure pattern is published in the cited ALDOT notices. They describe periodic interruptions across multiple construction phases, so restrictions can vary by date, activity and weather.
Is there an official detour for the SR-204 project?
The project announcement does not name a standing detour. Drivers should use the latest ALDOT or local traffic information if signs direct traffic onto a temporary alternate route.
Also popular on Amazon
- APPLY TO MOST DRILLS : 6 pieces screw extractors work with any drill and all the screw size or bolt (3-12mm), These extractor tools are used to reverse the damaged screw counterclockwise until it is released
- The DIY Tools for Men-Men won't know they need screw extractor set until they have one! This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and Unique tool gifts for men women. The must have stocking stuffers for men, gifts for dad, husband, father, him, guy teens, adult, Boyfriend, son on Birthdays, Christmas, Fathers Day or anniversary. Perfect Holiday Gifts Guide
- HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws.
- EASY TO USE: Just two simple steps to get the job done - drill a hole with a cutting size using the right size screw extractor and easily remove the screw or bolt using the removal tool Hardness 63-65HRC: Titanium hardened steel material, more durable than most screw extractors on the market, better hardness and durability than others, buy with confidence and complete peace of mind
- Cool Gadgets for Men Dad Christmas Birthday Gifts for Men and Women - Men won't know they need screw extractor sets until they have one! Every screw has the potential to rust and break, which can create a situation where it cannot be removed. Owning it, there will be no anxiety about rusty screws. This screw extractor set is GIFTS WRAP AVAILABLE, can be gifted to your loved ones as it reflects a fresh trend with fun and practical. Amazing and unique tool gifts for men women. A must have stocking stuffer for men on birthdays, Christmas, Father's Day or anniversaries, a gifts for dads, husbands, fathers, him, adults, boyfriends, sons. The best and most practical and surprising Christmas gifts
How much of SR-204 is being improved?
ALDOT’s project record lists 1.002 miles, from the Nisbet Lake Road junction to the SR-21 junction. WBRC gives the corresponding mile markers as 8.618 through 9.620.
Why does the project completion date say ‘weather permitting’?
Road work such as drainage, paving and striping can be delayed by unsuitable weather and site conditions. October 31, 2027 is therefore a projected target in ALDOT’s record, not a guaranteed opening date.
Free tools Windows power users keep installed
One-click scans. No signup required.
