Samsung’s U.S. error-code guide defines 33E (sometimes written 33 E) as an “Ice Pipe Heater Error.” It points to the ice-maker fill-tube heater circuit, but it does not prove the heater itself has failed. A connector or wiring problem may also be responsible, so record your refrigerator’s full model number and keep the code visible for model-specific diagnosis.
What does Samsung refrigerator error code 33E mean?
Samsung labels 33E “Ice Pipe Heater Error.” The fault concerns the heater circuit for the water pipe that supplies the ice maker. Samsung’s refrigerator error-code guide identifies the code and advises against unplugging the refrigerator or trying to clear the code from the panel unless instructed, because doing so can make diagnosis harder.
Does 33E mean the heater needs replacement?
No—not by itself. In its support answer for the RF32FMQDBSR/AA, Samsung lists an open heater and a loose or bad wire connector as possible causes. Repair references for other model families also discuss wiring and, in some cases, the control board. The code is a diagnostic clue; a technician needs to identify the fault before deciding which part, if any, to replace.
Resistance figures are model-specific, not a universal 33E test value. Samsung’s answer for the RF32FMQDBSR/AA gives around 62 ohms. Sears PartsDirect lists around 102 ohms for heater circuits in referenced RS30/RSG307 and RF26 model families. Those figures apply to their stated model contexts; use the service information for the refrigerator’s complete model number rather than treating either value as a general specification. Sears PartsDirect is a secondary repair source, so defer to model-specific official service documentation.
The Tool Desk
Outbyte PC Repair FREERepair Windows errors before they cause bigger problemsFix Now →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →#1 Best Overall
- PERFECT OEM REPLACEMENT: This premium refrigerator temperature sensor is a direct drop-in replacement designed to meet or exceed OEM specifications. It offers seamless compatibility for Samsung appliances and serves as a precise alternative for part numbers DA32-10104N, DA32-10104V, AP4979323, 2030330, and PS4138666. It restores original factory functionality to your cooling system without requiring modifications to the existing wiring harness.
- BROAD MODEL COMPATIBILITY: Engineered to fit a wide range of popular Samsung refrigerator configurations including French Door, Side-by-Side, and Top Freezer units. This sensor perfectly matches high-demand appliance series such as the RF263BEAESR, RF28HMEDBSR, RS25H5111SR, RF263BEAEBC, RF263BEAEWP, and RF28HFEDBSR. It ensures an exact physical and electrical match for these popular household models.
- HIGH-QUALITY ARCHITECTURE: Built using premium grade materials and high-accuracy thermistor components to withstand harsh, moisture-heavy refrigerator environments. Each sensor is rigorously tested for performance and long-term reliability. This stringent quality control guarantees precise resistance readings and stable temperature monitoring, preventing early component degradation over years of heavy operation.
- SOLVES COOLING ERRORS: This easy-to-install part eliminates frustrating refrigerator malfunctions by directly fixing common error codes like 5E or SE. Replacing your faulty component resolves critical performance issues such as excessive ice buildup on the evaporator coils, a freezing fresh food section, or a refrigerator that refuses to cool, quickly restoring optimal food preservation.
- TRUSTED USA WARRANTY: Wholesale Sensors provides reliable appliance repair solutions you can trust completely. This replacement part is backed by a comprehensive 24-month warranty and dedicated, USA-based product support. Our knowledgeable domestic team is always ready to assist with troubleshooting, giving you total peace of mind and confidence in your DIY refrigerator repair project.
What should you do when 33E appears?
- Record the code and model. Note whether the display shows 33E or 33 E, and write down the complete refrigerator model number from its identification label.
- Leave the code uncleared unless Samsung instructs otherwise. Do not unplug the refrigerator or use the panel to make the error disappear unless directed; preserving the displayed fault can help with diagnosis.
- Request model-specific help. Contact Samsung support or a qualified appliance technician and provide the exact model and code. Ask for diagnosis of the ice-pipe-heater circuit, including its connector and wiring.
- Use a test-button procedure only for its intended purpose. Samsung’s ice-maker troubleshooting guide describes general ice-maker testing, but that procedure does not replace 33E-specific diagnosis. If an error remains after an instructed troubleshooting step, follow Samsung’s error-code guidance and request service.
Accessing internal components and measuring heater resistance are repair tasks. If you are not trained to work on appliance electrical circuits, leave those checks to a qualified technician rather than attempting them yourself.
Should you call for service or research a replacement part?
| Route | Best fit | What to establish first |
|---|---|---|
| Samsung support or qualified appliance service | You want a model-appropriate diagnosis, or you are not trained to work on appliance electrical components. | Provide the full model number and displayed code; ask whether diagnosis points to the heater, connector, wiring, or another circuit component. |
| Model-matched parts research after diagnosis | You have the repair skills and a diagnosis that identifies a specific failed part. | Verify the exact compatible part against the full refrigerator model. Do not assume 33E alone confirms a heater replacement. |
No universal part number or repair price applies based on the code alone. Compatibility and the needed repair depend on the refrigerator model and the fault found.
Quick Recap
Best Value
- ✅[Compatibility] DA32-10104N refrigerator temperature sensor is compatible with Samsung refrigerators RF28K9580SG/AA, RF28K9580SR/AA, RF22K9581SG/AA, RF22K9581SR/AA, RF260BEAESR/AA, RF261BEAESR/AA, RF28R7551SR/AA, RF28R7551SG/AA, RF30KMEDBSR/AA, RF30KMEDBSG/AA and more (listed in product details). Replace DA32-10104V 2030330 AP4979323 PS4138666 114002. NOTE: Please press 'Ctrl+F' to quickly find your model.
- 👍🏻[Higher Quality] Designed exclusively for Samsung refrigerators, it strictly follows OEM specs and integrates seamlessly with your fridge’s temperature control system, avoiding signal errors and loose connections. Precise dimensions, wide compatibility, suitable for most Samsung refrigerators.
- ♻️[Accurate Temperature Control] Equipped with a high-sensitivity thermal element, it boasts a temperature detection accuracy of ±0.1℃ and senses tiny internal temperature changes in real time, preventing food spoilage from temperature fluctuations.
- 🏆[More Durable] The probe is made of food grade plastic, which is waterproof, moisture-proof, low temperature resistant, and aging resistant. Its accuracy will not decrease after long-term use, and its service life will be longer.
- 🛠️[Easy to Install] Install it in its original position, just a few simple steps to restore the refrigerator to normal operation. NOTE: Turn off the power before installation.
Rank #4
- Direct replacement refrigerator temperature sensor for Samsung DA32-10105X. Designed to meet or exceed OEM specifications for accurate temperature monitoring and reliable cooling performance. Replaces DA32-10105X, DA32-10105B, AP5331918, PS4176813, ensuring precise fitment and consistent refrigerator operation.
- WIDE COMPATIBILITY: Compatible with Samsung refrigerators including popular models such as RF428, RF426, RF323, and more. Fits multiple years of French door and bottom freezer units, providing broad compatibility across Samsung cooling systems and residential appliances.
- PREMIUM QUALITY BUILD: Manufactured with high quality materials and a precision thermistor for accurate temperature readings. Designed to withstand moisture, temperature fluctuations, and continuous operation. Each sensor is rigorously tested to ensure durability, reliability, and consistent cooling performance.
- EASY INSTALLATION: Simple installation with basic tools, typically completed in minutes. Replaces faulty sensors that cause inconsistent cooling, temperature fluctuations, frost buildup, or error codes such as 5E, SE, or sensor related faults. Restores proper temperature regulation and efficient refrigerator operation.
- TRUSTED WHOLESALE SENSORS BRAND: Backed by Wholesale Sensors with USA based support and a 24 month warranty. Trusted for high quality replacement parts and dependable performance. Ideal for technicians and DIY users who need reliable solutions and responsive customer service.
Rank #3
- Universal Compatibility: The DA32-10104N Temperature Sensor is designed specifically for Samsung refrigerators and compatible with multiple models. It replaces part numbers 114002, DA32-10104V, 2030330, AP4979323, and PS4138666, making it ideal for Samsung fridge repairs.
- Precise Temperature Sensing: This temperature sensor plays a critical role in sensing the internal temperature of your refrigerator. It sends this data to the control board, helping your refrigerator adjust its cooling settings to maintain optimal temperature.
- Durable & High-Quality Material: The DA32-10104N sensor is made from durable, long-lasting material. With a sensitive temperature head at one end and a robust plug at the other, this sensor ensures reliable performance and extends the service life of your refrigerator.
- Easy Installation: No professional skills or expensive tools required! Compatible with Samsung refrigerator temperature sensor is designed for easy installation, saving you time and money. Simply replace the faulty sensor and your refrigerator will be up and running again in no time.
- After-Sales Support: We stand behind the quality of our product. If you have any issues with the DA32-10104N temperature sensor, our customer support team is ready to assist. Warm Tips: Always disconnect the power and water supply before making any repairs.
Rank #2
- DIRECT REPLACEMENT PART: DA32-10104N refrigerator temperature sensor is a replacement for part numbers DA32-10104V, 2030330, AP4979323, PS4138666, and 114002. Check your original part number and refrigerator model before ordering to ensure proper compatibility.
- COMPATIBLE SAMSUNG REFRIGERATOR MODELS: Designed for select Samsung refrigerators including RF261BEAESR, RF28HFEDBSR, RF30HBEDBSR, and RF31FMESBSR. Please verify your refrigerator model number before purchase.
- HELPS RESTORE COOLING PERFORMANCE: A faulty sensor may cause uneven temperatures, excessive freezing, ice buildup, poor cooling, or temperature-related error codes. Replacing the damaged sensor can help restore normal refrigerator operation.
- DURABLE MATERIALS: Made with a protected thermistor probe, durable plastic housing, and insulated wiring to resist moisture, bending, and everyday wear inside the refrigerator.
- SECURE PLUG CONNECTION: The firmly fitted connector supports stable signal transmission between the temperature sensor and refrigerator control system, helping prevent loose or unreliable electrical connections.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.




