Recommended Free Tools
The best cordless stapler depends on what you’re fastening: upholstery, narrow-crown woodworking, cable, and fencing each call for different tools and fasteners. Start with the material and the exact staple type and dimensions your project requires, then compare compatible models—not a single all-purpose ranking.
Which cordless stapler is right for your project?
“Cordless stapler” covers several distinct tool categories. A light craft or upholstery stapler is not a substitute for a narrow-crown woodworking tool, and neither is designed to replace a cable or fencing stapler. Match the tool to the task before comparing battery platforms or features.
| Work type | Example model | What to verify |
|---|---|---|
| Craft and upholstery | BLACK+DECKER BCN115 | Staple crown and leg length, compatible pin nails, and the exact package contents. BLACK+DECKER specifications |
| Narrow-crown woodworking | Bosch Professional GTH18V-38-2M; Makita LXT XTS02; DEWALT DCN681B | Staple gauge, crown, leg-length range, actuation controls, and regional availability. Bosch specifications; Makita announcement; DEWALT stapler catalog |
| Cable installation | DEWALT DCN701B | Confirm the exact staple type and cable-specific fit in the model manual. DEWALT stapler catalog |
| Fencing | DEWALT DCFS950B; Milwaukee M18 FUEL Utility Fencing Stapler | Use the specified fencing staple type and lengths; these are specialist tools, not household upholstery staplers. DEWALT DCFS950B; Milwaukee specifications |
Check fastener fit before buying
A tool’s name or broad category does not establish that it accepts the staple you already have. Check the model specification or manual for fastener type, crown or gauge, and leg length. Also confirm suitability for the material and application; a fastener that physically loads may still be wrong for the work.
- BLACK+DECKER BCN115: The product page lists heavy-duty staples with a 10.6 mm crown and 6–14 mm leg length, as well as compatible 18-gauge pin nails up to 15 mm. See BLACK+DECKER’s specifications.
- RYOBI R18ST50-0: RYOBI UK describes this 18V ONE+ model for upholstery, carpet tacking, and general DIY, with 10 mm crown staples from 6–14 mm. This is UK-market information; check the local model and package. RYOBI UK staplers
- Milwaukee fencing stapler: Milwaukee specifies its 9-gauge galvanized staples in 1 1/2-, 1 3/4-, and 2-inch lengths. Confirm compatibility with the exact fastener before use. Milwaukee specifications
Models by application
Craft and upholstery: BLACK+DECKER BCN115
BLACK+DECKER describes the BCN115 as a 4V MAX cordless craft stapler for upholstery, DIY, and recycling. Its product page states up to 750 staples per charge when stapling into pine with 12 mm by 10 mm staples on a full charge. That is the manufacturer’s estimate under that stated condition, not a general runtime guarantee across materials and fasteners. BLACK+DECKER BCN115
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEFix the driver behind crashes, sound loss and screen glitchesFind Drivers →#1 Best Overall
- AUTOMATIC STAPLING: 25-sheet capacity electric stapler with automatic stapling when paper is detected; jam-free technology ensures reliable desk performance
- DUAL POWER OPTIONS: Operates on 4 AA batteries or AC power adapter (both included) for flexible desk use anywhere
- ADJUSTABLE DEPTH: Stapling depth can be adjusted for precise placement to accommodate various project needs
- EASY RELOAD DESIGN: Magazine opens with a simple press of the button; compatible with standard 1/4 in staples; includes 1,000 staples to get started
- EVERYDAY DESK USE: Ideal automatic electric stapler for home or office use with heavy-duty capability for frequent stapling tasks
Narrow-crown woodworking: Bosch, Makita, or DEWALT
Bosch’s Professional GTH18V-38-2M is an 18V narrow-crown stapler. Bosch lists a 109-staple magazine, selectable single or contact actuation, stepless depth adjustment, and tool-free jam clearing. It is identified as part of the 18V system and AMPShare compatibility; confirm the battery and charger included with the specific regional SKU. Bosch GTH18V-38-2M
Makita’s September 9, 2025 announcement describes the 18V LXT XTS02 as a 1/4-inch crown, 18-gauge stapler for 3/8–1 1/2-inch legs, with a 110-staple magazine. The announcement said it would be “available soon,” so check current local availability rather than assuming it is stocked. Makita also reported up to 1.25x faster stapling speeds than DEWALT’s DCN681B; that is a company-reported comparison, not an independent test. Makita’s announcement
Rank #2
- Motorized design for quiet, reliable use when stapling 2 to 20 sheets
- Extra wide paper lead-in for quick staple positioning
- Fast and easy push-button staple reloading: simply push the button to eject the staple tray, load staples, and push tray back into place until you hear a Click!
- For best results, use with Bostitch Premium Standard Staples (B00006IFMO)
- Can be powered by an AC adapter, or 4 AA batteries for wire-free use
DEWALT lists the 20V MAX XR DCN681B as a narrow-crown stapler. Check the model documentation for the fastener specifications and compare only details that matter to your materials and job. DEWALT stapler catalog
Cable work: DEWALT DCN701B
DEWALT’s catalog lists the 20V MAX cordless cable stapler DCN701B and a kit SKU. Cable fastening calls for the appropriate cable-specific staple, so confirm the staple type and fit in the manual for the exact model before buying fasteners or using the tool. DEWALT stapler catalog
Rank #3
- T50-FIRST FASTENING FOR EVERYDAY PROJECTS — T50 staples are the primary fastening function; 1/2 in. T50 staples are recommended for upholstery, fabric, foam, canvas, cardboard and thin softwood. Use 18GA brad nails up to 9/16 in. as a secondary option for light trim, picture frames and small finishing details.
- CORDLESS, LIGHTWEIGHT CONTROL — The 1.6 lb 4V tool keeps repair and decorating jobs mobile. Charge by Type-C in about 2 hours and work at up to 50 fasteners per minute.
- CHOOSE THE RIGHT MATERIAL BEFORE YOU START — Built for soft materials and thin softwood. Test on scrap first. It is not designed for hardwood, plywood, OSB, thick lumber, framing or heavy construction.
- BETTER RESULTS WITH CORRECT SETUP — Load the magazine from the bottom, use the specified T50 staple length, then press the contact nose flat at 90° before pulling the trigger.
- READY FOR LIGHT DIY — Includes 1,200 T50 staples and 400 brad nails to start common upholstery, display, décor and repair tasks. Use the safety switch and keep hands clear of the firing area.
Fencing: DEWALT DCFS950B or Milwaukee M18 FUEL
DEWALT lists a 20V MAX 9-gauge cordless fencing stapler, model DCFS950B. Milwaukee’s M18 FUEL Utility Fencing Stapler is specified for its 9-gauge galvanized staples in 1 1/2-, 1 3/4-, and 2-inch lengths. Milwaukee claims a six-fold productivity increase versus manual staple installation; this is its stated comparison for fencing work, not a cross-category tool comparison. DEWALT DCFS950B; Milwaukee M18 FUEL specifications
Compare battery, controls, and working features
Once a model accepts the right fastener, compare features that affect how it will work on your job. Battery-platform compatibility can matter if you already own tools in that system, but package contents vary: verify whether the exact SKU includes a battery and charger. BLACK+DECKER describes the BCN115 as a built-in rechargeable cordless tool; Bosch identifies its stapler with the 18V system and AMPShare compatibility. BLACK+DECKER; Bosch Professional
Rank #4
- 3X FASTER STAPLING: Impulse Drive Technology lets you remove your paper stack immediately after the stapler fires—no waiting for the mechanism to retract
- STAPLES UP TO 30 SHEETS AUTOMATICALLY: Electric stapling power easily secures up to 30 sheets at once, ideal for reports, presentations, and everyday office paperwork.
- ZERO JAMS: No-Jam Technology engineered by Bostitch eliminates the frustrating staple jams that slow down high-volume stapling
- ONE-BUTTON RELOAD: FASTLOAD Push-button magazine release ejects the staple tray instantly for fast, no-fuss reloading
- LOW-STAPLE ALERT: Built-in refill indicator light lets you know when staples are running low before you run out mid-stack
- Magazine capacity: A larger magazine can mean fewer reloads. Bosch lists 109 staples; Makita’s XTS02 announcement lists 110.
- Actuation: Bosch lists selectable single and contact actuation. Choose only a mode appropriate to the task and follow the manual.
- Depth adjustment: Bosch lists stepless depth adjustment, useful when the job calls for adjusting how far fasteners are driven.
- Jam clearing: Bosch lists tool-free jam clearing. Check the manual for the correct clearing procedure on any model.
- Weight and handling: Compare manufacturer specifications for the specific model and configuration, including battery if applicable. The cited listings do not establish comparative comfort or long-term reliability.
How to choose without mistaking claims for test results
- Identify the job and material. Decide whether you need a craft/upholstery, woodworking, cable, or fencing stapler.
- Match the fastener precisely. Verify staple type, crown or gauge, and leg length against the manual or model specification.
- Check the regional SKU. Confirm current availability and whether the package includes a battery and charger; listings and product availability can change.
- Compare useful operating details. Look at magazine capacity, actuation, depth adjustment, jam clearing, weight, and battery platform where the manufacturer states them.
- Read output claims with their conditions. Runtime and speed figures are manufacturer claims, not equivalent independent tests unless the underlying conditions are comparable.
The available manufacturer listings establish product categories and selected specifications, but do not provide an independent cross-brand test of durability, comfort, or long-term reliability. Avoid treating a speed or productivity claim as proof that one category or model is best for every job.
Quick Recap
Best Value
- Capable of fastening a wide range of crown staples from 1/4 in. to 9/16 in.
- On-board dual screen/wire attachment allows installation that guide staples without penetrating wire or screen
- Knob controls quick depth of drive adjustments through various materials
- Drives up to 5,500 staples per charge on a P108 18-Volt ONE+ 4.0 Ah LITHIUM+ Battery (sold separately)
- Battery and charger sold separately
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Free tools Windows power users keep installed
One-click scans. No signup required.
