October DealsAmazon USOctober deal check: compare before you payAmazon US: current deals, useful picks and tech finds.Check DealsClean PCRecommendedOne scan can reveal what keeps slowing WindowsLook for cleanup and repair opportunities.Run ScanOctober DealsAmazon USDeal season is back - check today's better picksAmazon US: current deals, useful picks and tech finds.See Picks×
Skip to content
Bettesworth Construction
air conditioner

How to Reset a Daikin Air Conditioner Safely

Daikin’s general reset for a flashing operation lamp uses the air conditioner’s dedicated breaker, switched off for 20 minutes. Never turn off the main breaker, and call for service if the fault returns.

By Bettesworth Construction Team 3 min read
Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

If your residential Daikin air conditioner’s operation lamp is flashing and the unit will not run, Daikin’s general reset is to turn the unit off, switch off its dedicated circuit breaker for 20 minutes, restore power, then turn the unit on and check the lamp. Do not switch off the property’s main breaker. If the dedicated breaker has tripped or the lamp flashes again after the reset, stop and contact a qualified professional or Daikin support.

Reset a Daikin air conditioner when the operation lamp flashes

Daikin Global gives this procedure for the symptom “The air conditioner does not operate. (The operation lamp flashes.)” It is general residential guidance, not a universal procedure for every model or country. Follow the instructions in your exact model’s manual if they differ.

  1. Turn the air conditioner off.
  2. Find the air conditioner’s dedicated circuit breaker in the main fuse box and switch it off. Leave it off for 20 minutes.
  3. Switch the dedicated breaker back on.
  4. Turn the air conditioner on and check the operation lamp.

Do not turn off the main breaker. If you cannot identify the air conditioner’s dedicated breaker, ask the installer or a qualified electrician rather than guessing. Daikin’s instructions are at Daikin’s residential troubleshooting page.

What to do if the problem remains

The operation lamp flashes again

Daikin says a flashing lamp that returns after the reset likely indicates a malfunction. Do not keep cycling the breaker; contact a Daikin representative or qualified service professional.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
#1 Best Overall
Replacement Remote Control for Daikin Air Conditioner FTKN09AXVJU,FTKN12AXVJU,FTKN18AXVJU,FTKN24AXVJU,FTXB09AXVJU,FTXB12AXVJU,FTXB18AXVJU,FTXB24AXVJU,FTKB09AXVJU,FTKB12AXVJU,FTKB18AXVJU,FTKB24AXVJU
  • Fit for: BRC52A61,BRC52A62,BRC52A63,FTKN09AXVJU,FTKN12AXVJU,FTKN18AXVJU,FTKN24AXVJU,FTXN09AXVJU,FTXN12AXVJU,FTXN18AXVJU,FTXN24AXVJU
  • Fit for: BRC52B61,BRC52B62,BRC52B63,BRC52B64,BRC52B65,FTKN09AXVJU,FTKN12AXVJU,FTKN18AXVJU,FTKN24AXVJU,FTKB09AXVJU,FTKB12AXVJU,FTKB18AXVJU,FTKB24AXVJU,FTXB09AXVJU,FTXB12AXVJU,FTXB18AXVJU,FTXB24AXVJU
  • Display in Fahrenheit and Celsius!
  • With Green Backlit, It's very easy and convenient to Operate the remote control at night.
  • No_battery included (AAA 1.5V *2PCS)

The dedicated breaker has tripped

A tripped breaker can indicate an electrical fault. Daikin warns against immediately resetting a molded-case circuit breaker or earth-leakage circuit breaker without first checking for insulation problems. Stop and have the issue assessed by a qualified electrician or service professional. Daikin’s error-code and repair information is intended for dealers with repair experience, not end users.

The controls do not work

If the unit does not respond to the remote, check its batteries and the timer setting before assuming it needs a reset. If the controls still do not work, contact Daikin support or the installer. For unclear remote display or poor remote operation, Daikin suggests replacing both batteries with new alkaline batteries; check the exact remote’s manual for battery size. See Daikin’s remote-control troubleshooting guidance.

Check these common causes before calling for service

The unit does not operate and the lamp is off

  • Check whether the dedicated breaker has tripped or a fuse has blown. If a breaker has tripped, do not reset it until the electrical issue has been assessed.
  • Check for a power outage or a problem with the power connection.
  • Check the remote batteries and whether a timer is set.

These are among the causes Daikin lists for a unit that will not operate without a flashing lamp. See Daikin’s troubleshooting page.

Rank #2
2531835 Replacement Remote Control for DAIKIN Air Conditional FTXN18AXVJU,FTXN24AXVJU,FTKB09AXVJU, FTKB12AXVJU, BRC52A61, BRC52A62, 2543304,FTXB09AXVJU, FTXB12AXVJU,FTKN09AXVJU, FTKN12AXVJU
  • Friendly Reminder: (1) Fahrenheit (℉)/Celsius (℃) Free Switching- Press and hold both the "V" and "Λ" buttons on the remote control simultaneously for 4-7 seconds. (2) No battery included.Not for consumption. (3)Please verify that this is the correct model for your unit prior to ordering. If you have any questions or you are looking for some other remote control models, Please feel free to contact us,or leave message.

Cooling or heating is poor

  • Confirm the operating mode and temperature setting.
  • Check that airflow direction and quantity are appropriate and that nothing obstructs the indoor unit.
  • Check for open windows or doors and excessive ventilation.
  • Clean the air filters. Daikin recommends cleaning them every two weeks and directs owners to the operation manual for the correct method. This recommendation does not mean every unit needs a replacement filter.

Daikin’s cooling and heating troubleshooting guidance covers these checks. Do not use commercial cleaning agents inside the air conditioner: Daikin warns they may damage resin or heat-exchanger parts and cause problems such as water leaks.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

Allow for normal restart delays

If you have just stopped the unit or changed its operating mode, wait about three minutes before trying to restart it. Daikin describes this protective delay as normal, not a malfunction. See Daikin’s air-conditioner troubleshooting guidance.

When to contact Daikin or a professional

  • The operation lamp flashes again after the prescribed reset.
  • The dedicated breaker trips, or you are unsure which breaker controls the air conditioner.
  • The unit remains unresponsive after checking the remote and timer.
  • You need model-specific instructions or the manual’s procedure differs from this general guidance.

Use Daikin support, the original installer, or a qualified service professional as appropriate. Do not attempt dealer-level error-code repairs yourself.

Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.

Leave a Reply

Your email address will not be published. Required fields are marked *

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

More from the Site Office

Recommended PC Tool
Recommended PC Tool
Crashes, No Sound, or Screen Glitches?Free driver scan
Windows Errors? Fix Them Before They SpreadFree repair scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.