Milwaukee lists its 7-1/4-inch, 24-tooth framing blade, model 48-40-0720, for LVL. It is a concrete option if your saw accepts the blade’s diameter, 5/8-inch arbor with diamond knockout, and kerf. That listing is not an independent performance test or proof that it is the best-value or most precise blade for every LVL cut.
Which circular saw blade is listed for LVL?
Milwaukee specifies its 7-1/4-inch, 24-tooth framing blade (model 48-40-0720) for softwoods, hardwoods, plywood, OSB, LVL, PSL, LSL, and OSL. The product page describes carbide teeth, a thin kerf, and diamond venting. These are manufacturer specifications and feature claims, not comparative test results. Milwaukee 48-40-0720 product details.
Milwaukee markets this 24-tooth blade for fast cuts. It is a framing blade, so do not assume the listing promises a finish-grade surface. If appearance or a particularly clean edge matters, check the blade maker’s guidance for that task and material; the available product information does not establish its finish quality on LVL.
Check compatibility before buying
A blade that is listed for LVL still has to match the saw. Check the saw manual and the blade specifications for diameter, arbor, and kerf, and use only blades recommended for the tool. The Milwaukee 48-40-0720 is 7-1/4 inches and has a 5/8-inch arbor with a diamond knockout. Do not assume it fits a saw merely because the diameter matches.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Scan for outdated or missing drivers - takes under a minuteDriver Scan →Repair Windows errors before they cause bigger problemsFix Now →#1 Best Overall
- Heavy Duty Cutting - Designed for large capacity beam, post, and timber cutting. 16-5/16-Inch Blade is ideal for timber framing, such as LVL, Gleams, and Parlays. Cuts up to 6 1/4-Inch at 9 Degrees and 4 3/16-Inch at 45 Degrees.
- Enhanced Performance - Features TiCo Hi-Density carbide, specifically designed for each application to increase performance and deliver long-lasting sharpness for smooth, precise cuts.
- Non-stick Coating - Perma-SHIELD Non-stick Coating protects the blade from heat, gumming, and corrosion, ensuring cleaner, smoother cuts and less maintenance.
- Shock Resistance - Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impacts, providing maximum durability and longer blade life even in tough conditions.
- Smooth Finish - Leaves a smooth surface that requires little to no sanding, making it ideal for timber framing, remodeling, demolition, and landscaping projects. Designed for Makita Beam Saw.
What about a thicker-kerf alternative?
Milwaukee also lists its 6-1/2-inch, 24-tooth thick-kerf framing blade for LVL. The company describes it as designed for straight rip cuts and stability. It is a different size and kerf from the 7-1/4-inch example, and is suitable only for saws designed for those specifications. Milwaukee’s description is not an independent measurement of stability or cut quality. Milwaukee 6-1/2-inch thick-kerf blade details.
How to choose for the cut you need
- Start with the saw: Confirm blade diameter, arbor, kerf, and the saw maker’s recommendations in the manual.
- Check the material listing: Prefer a product page that explicitly names LVL or otherwise clearly covers the material; do not assume every wood blade is equivalent.
- Match the blade to the task: A framing blade is intended for framing cuts. Manufacturer language about speed or stability is not proof of finish quality or independently measured performance.
- Compare price only with current information: The cited product specifications do not establish current prices or best value. Check sellers for current availability and price, then compare compatible blades with the same task in mind.
For example, DEWALT’s UK product page describes a 216 mm, 24-tooth Extreme 2 Life blade for stationary saws and lists hardwood, wood, plywood, MDF, and chipboard—but does not specifically identify LVL. That page alone does not verify it as an LVL choice. DEWALT UK product details.
Rank #2
- 165/16 in bigfoot Blade is ideal for timber framing such as laminated veneer lumber LVL glued timber Glulams and paralams
- Cuts up to 61/4 in at 90 deg and 43/16 in at 45 deg
- Lasercut stabilizer vents for reduced vibration and precise cuts
- Alternate Top Bevel ATB tooth geometry where the top bevel alternates from right to left that providing for a smooth clean cut
- Durable TiCo HiDensity Carbide teeth for razorsharp cuts and longer blade life
Cutting LVL: distinguish trimming from structural modifications
Cutting an LVL member to length at the jobsite is different from notching, tapering, or drilling it. The Canadian Wood Council says LVL can be cut to length and advises: “All special cutting, notching or drilling should be done in accordance with manufacturer’s recommendations.” Canadian Wood Council LVL guidance.
APA’s technical note, revised February 1, 2020, recommends avoiding field modifications such as notching, tapering, or drilling when they are not shown on design or shop drawings. This guidance concerns structural modifications, not the choice of blade for an otherwise permitted cut to length. Check the project drawings and LVL manufacturer’s instructions before altering a structural member. APA technical note on LVL field modifications.
Recommended Free Tools
Rank #3
- Advanced Tracking Point Tooth Design - Provides unmatched Cutting precision, delivering straight cuts while extending blade life up to 5X longer than standard framing blades.
- Enhanced Efficiency - Optimized for corded and cordless saws, offering up to 30% more cuts per Battery charge in cordless models, reducing downtime on job sites.
- Anti - Vibration Technology - Laser - cut stabilizer vents minimize vibration and blade wobble, ensuring smooth, precise cuts with added durability and stability.
- Perma - SHIELD Coating - Non - stick coating resists heat, gumming, and corrosion, keeping the blade cooler and enhancing longevity.
- Ideal for Heavy - Duty Applications - Perfect for framers, roofers, and remodelers, excelling in cutting through pressure - treated wood, 2X lumber, plywood, hardwoods, and softwoods.
Cut safely with the saw manual for your tool
Follow the operating instructions for the actual saw, including its blade-selection and workpiece-support guidance. Hilti’s SCW 70 instructions warn that a twisted or misaligned blade can climb out of the kerf and kick back; they also advise clearing obstructions above and below the workpiece and using a blade suitable for the material and recommended for the saw. Hilti SCW 70 operating instructions.
Quick Recap
Best Value
- Long lasting - cut through tough applications with state-of-the art engineering
- Cool cutting performance - limit binding, warping, or burning the workpiece with a proprietary heat-vent design.
- Help minimize friction - make smooth cuts with a PTFE coating that helps minimize friction and maximize ease-of-use.
- Optimized tooth geometry - works in challenging or wet materials with an optimized tooth geometry that delivers crisp, clean cuts.
Rank #4
- For crosscuts. Excellent cut with perfect finish on two-sided melamine, wood and plywood
- For cutting lumber, plywood and OBS sheets. To be used on portable and cordless circular saws
- Technical details: kerf thickness 0.069, plate thickness 0.043, 5-Degree cutting angle, grind 10-Degree
- Super-thin kerf to reduce material waste. Shear angle design to produce smooth cuts, reduce cutting force and improves the cutting speed
- Special Carbide to prevent blade from any material failure. Non-Stick Orange Shield Coating reduces pitch build-up and protects against corrosion
- Check that the blade is installed and aligned as directed by the saw manual.
- Make sure the cut path is clear above and below the LVL before starting.
- Keep the cut straight and avoid twisting the blade in the kerf.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
