Do these 3 things before closing this tab:
1Clear out junk files and repair common Windows errors2Scan for outdated or missing drivers - takes under a minute3Repair Windows errors before they cause bigger problemsA Samsung washer’s 4C error usually means it is not getting water at the expected rate. Check the household supply and open tap first, then inspect the inlet hoses and clean the inlet mesh filter. If the code returns after these checks, contact Samsung Support rather than replacing parts based on the code alone.
What the 4C error means
Samsung UK describes 4C/4E as a detected water-supply problem, commonly related to low water pressure or flow. Samsung’s general UK information-code page groups 4C, 4E and E1 under water not being supplied. The exact code label can vary by model and market, so use the manual for your washer if its display or guidance differs.
Samsung UK gives a water-pressure range of 0.5–8 bar in its support guidance. Treat that as UK manufacturer guidance, not a universal specification for every model or country. Samsung UK: 4E/4C troubleshooting
Check the water supply and hoses safely
- Turn off and unplug the washer before moving it or disconnecting a hose. Keep the appliance unplugged while accessing its water connections.
- Confirm water is available and the washer’s supply tap is fully open. If the household supply is interrupted or a tap is frozen, resolve that first.
- Inspect the inlet hose. Straighten kinks and look for blockages or visible damage. Do not keep using a damaged hose; arrange an appropriate replacement or service.
- Check hot and cold connections if your model uses both. Match each hose to the washer’s inlet labels and manual. Samsung US notes that swapped lines can cause related fill errors on some models; this is not a universal explanation for every 4C error. Samsung US: washer information codes
Clean the inlet mesh filter
A clogged mesh screen can restrict incoming water. Samsung recommends periodic cleaning; its UK guidance says at least twice a year. Follow your model’s manual for access and reconnection instructions.
#1 Best Overall
- What You Will Get? 1 x DC97-15459H Washer Water Valve Assembly. The DC97-15459H water inlet valve controls the flow of water into the washer, operating at AC 110/120V and 60Hz. It features 4 solenoid coils and is compatible with specific Samsung washer models.
- Replaces Part Numbers: Washer inlet valve DC97-15459H Replaces AP5621731 PS4220862 EAP4220862. DC97-15459H washing machine water valve can fit for SOME Samsung washers. If you are not sure whether the item fits your washer, please send us an email,we can confirm it for you.
- Samsung Washer Water Inlet Valve: Fits models - WA400PJHDWR/AA-01, WA400PJHDWR/AA-02, WA400PJHDWR/AA-03, WA400PJHDWR/AA-04, WA40J3000AW/A2, WA40J3000AW/A2-00, WA422PRHDWR, WA422PRHDWR/AA, WA45H7000AP, WA45H7000AP/A2, WA45H7000AW, WA45H7000AW/A2, WA45H7000AW/A2-02, WA45H7000AW/A2-04, WA45M7050AW/A4, WA45M7050AW/A4-00, WA45M7050AW/A4-01, WA45M7050AW/A4-02, WA45M7050AW/A4-03, WA50R5200AW, WA50R5200AW/US, WA50R5400AV, WA50R5400AV/US, WA50R5400AW, WA50R5400AW/US, etc.
- Fix the Following Symptoms: Can not stop water intake. The Washer does not feed water. Leakage at water valve. Incorrect water filling. Displays the error codes E4, F8, E1, LF, LO and FL, etc. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
- Please Note: If you have questions about whether our products are suitable for your washing machine, please feel free to contact us to confirm. We pride ourselves on our excellent customer service. Micnce DC97-15459H water inlet valve supports 5 YEARS after-sales service. If you encounter any problems with your purchase, regardless of reason or timing, are not satisfied, please do not hesitate to contact us.
- Turn off the water supply and unplug the washer.
- Disconnect the inlet hose as directed in the manual, taking care to manage any water in the hose.
- Gently remove the mesh filter and rinse it under running water. Samsung Pakistan describes using a toothbrush or similar small brush to clean the screens; avoid damaging the mesh.
- Reinstall the filter, reconnect the hose securely, and turn the water supply back on.
- Check the connection for leaks before starting a cycle.
Samsung Pakistan: cleaning the mesh filter
Check the detergent drawer
Samsung UK also identifies a blocked detergent drawer as a possible contributor to a 4C check code. Remove the drawer according to the manual, clear any obstruction, clean it if needed, and reinstall it.
Consider the drain hose only with model-specific instructions
If the error remains, Samsung Gulf includes drain-hose placement and siphoning among possible checks. Installation details differ by washer and regional guidance, so do not apply a measurement from another model’s instructions. Use the installation section of your exact manual. Samsung Gulf: 4E/4C troubleshooting
Rank #2
- 【DC97-15459G WASHER WATER INLET VALVE】: The DC97-15459G Water Inlet Valve is rated for 110/120 V, 60 Hz. The DC97-15459G washer water valve has two threaded ports of 0.91" diameter that are connected to hot and cold water hoses at the back of the washer. The DC97-15459G inlet valve has 5 solenoid valves. The DC97-15459G Water Inlet Valve Assembly is a high quality 0EM product
- 【FIX SYMPTOM】: DC97-15459G Water Inlet Valve can fix the following symptoms: ①Can not stop water intake. ②The Washer does not feed water. ③Leakage at water valve. ④Incorrect water filling. ⑤Displays the error codes E4, F8, E1, LF, LO and FL, etc. If your washer has one or more problems, please replace the water inlet valve DC97-15459G promptly
- 【EXCELLENCE】: The DC97-15459G water valve is made of high quality ABS plastic and stainless steel metal and well test by the manufacturer and is a new GENUINE 0EM Samsung replacement part. High-standard production makes the seams of the DC97-15459G water valve more closely handled, so that the valve is not easy to leakage, seepage, not easy to rust, prolonging the service life
- 【REPLACEMENT PART No.】: DC97-15459G Water Valve fits for Samsung washer. Replace: 3276197, AP5623056, PS4220861, EAP4220861. If you are not sure whether DC97-15459G Washer Water Inlet Valve is suitable for your washer, you can contact us to help you confirm
- 【WIDE COMPATIBLE】: DC97-15459G Water Inlet Valve Assembly Compatible with: WA456DRHDSU/AA, WA45K7600AW/A2, WA50F9A7DSP/A2, WA50F9A7DSW/A2, WA50F9A8DSP/A2, WA50F9A8DSW/A2, WA50K8600AV/A2, WA50K8600AW/A2, WA52J8060AW/A2, WA52J8700AW/A2, WA54M8750AV/A4, WA48J7700AW/A2, WA50M7450AW/A4, WA48H7400AW/A2, WA48J7770AW/A2, WA52J8700AP/A2, etc
Restart the washer and decide whether to request service
After restoring the hoses, filter, drawer and water supply, start a cycle and see whether the washer fills normally. If controls briefly do not respond after an information code, Samsung’s US guidance says some models may disable buttons for three minutes; wait and consult the model manual rather than forcing controls.
Contact Samsung Support or request service if the code persists after the basic checks, or if you find a leak, damaged hose or ongoing low pressure. The code alone does not establish which internal part has failed, and model-specific diagnosis requires the washer’s model information and further assessment.
Quick Recap
Best Value
- 【DC97-15459H WATER INLET VALVE】--- The package includes 1 x DC97-15459H Water Inlet Valve. The Water inlet valve DC97-15459H is for washer, controls the water flow into the washer. The DC97-15459H samsung washer water valve supply voltage is AC 110/120V and the power is 60Hz. The size is 8.7" x 3.4" x 2.5". The DC97-15459H Samsung Water Inlet Valve has 4 solenoid coils, designed to fit specific Samsung manufactured washer models. ►Please note the distinction between the DC97-15459G and DC97-15459H water valves. The DC97-15459H Washer Water Valve features 4 solenoid valves, whereas the other variant has 5 solenoid valves. This will help avoid wasting time by purchasing the incorrect product
- 【HIGH QUALITY】--- Beaquicy DC97-15459H sam-sung washer water valve is a new replacement part. The DC97-15459H Water Inlet Valve is made of high quality durble material, and well-tested by the manufacturer, meets OEM standards, ensure long-lasting and effective performance.The part is easy and quick to install, saving you time and effort. ►The DC97-15459H Washer Water Valve Assembly can fix the following symptoms: ①Will not stop filling with water. ②No hot or cold water. ③Washer leaks. ④Will not fill with water. ⑤Noisy. ⑥Display error codes such as E4, F8, E1, LF, LO, and FL. Replace the DC97-15459H Washer Water Inlet Valve Assembly promptly to resolve the issue
- 【WIDE COMPATIBILITY】--- The DC97-15459H washing machine water valve can fit for Samsung washers. Replaces: AP5621731, PS4220862, EAP4220862, 33090068, 3282688, PD00007209. ►Fits models: WA400PJHDWR/AA-01, WA400PJHDWR/AA-02, WA400PJHDWR/AA-03, WA400PJHDWR/AA-04, WA40J3000AW/A2-00, WA45H7000AW, WA45H7000AW/A2, WA45H7000AW/A2-02, WA45H7000AW/A2-04, WA45M7050AW/A4-00, WA45M7050AW/A4-01, WA45M7050AW/A4-02, WA45M7050AW/A4-03, WA422PRHDWR, WA422PRHDWR/AA, WA45H7000AP, WA45H7000AP/A2, WA50R5200AW, WA50R5200AW/US, WA50R5400AV/US, WA50R5400AW/US, etc. If you are unsure whether the DC97-15459H Samsung Washer Water Inlet Valve is suitable for your washer, please contact us to help you confirm
- 【5 YEARS GUARANTEE】---The DC97-15459H Water inlet valve supports 5 years after-sales service. Beaquicy attaches great importance to the shopping experience of each customer. Risk-free shopping, If you have any quality problem, you can ask for after-sales service, please contact us in time (click "Contact Seller" in the "Your Order" option). We will try our best to solve the problem
- 【EASY TO INSTALL】--- Before installing DC97-15459H Water inlet valve,unplug the washer and shut off the water supply. Wear work gloves to protect your hands.You’ll prepare a Philips screwdriver, small flathead screwdriver, bucket or small container, towel, pliers, and vice grips.Following along with an online repair video is the easiest way to ensure proper DIY installation of a water Inlet Valve
Rank #4
- 【Package Contains】Washer Water Inlet Valve×1 (as shown in the picture). Please check the compatibility before purchasing. If your washer displays E4, F8, E1, LF, LO, or FL error codes, leaks, or fails to fill with water, replacing the water inlet valve will solve these problems. The water inlet valve can control cold and hot water in the program cycle of the washing machine.
- 【Compatibility】Fit for samsung models: WA456DRHDSU/AA WA456DRHDWR/AA WA45H7200AP/A2 WA45H7200AW/A2 WA45K7600AW/A2 WA48H7400AP/A2 WA48H7400AW/A2 WA48H7400AW/AA WA48J7700AW/A2 WA48J7700AW/AA WA48J7770AP/A2 WA48J7770AW/A2 WA48J7770AW/AA WA50F9A6DSW/A2 WA50F9A7DSP/A2 WA50F9A7DSW/A2 WA50F9A8DSP/A2
- 【Compatibility】Fit for samsung models: WA50F9A8DSW/A2 WA50K8600AV/A2 WA50K8600AV/AA WA50K8600AV/AA WA50K8600AW/A2 WA50K8600AW/AA WA50M7450AP/A4 WA50M7450AW/A4 WA52J8060AW/A2 WA52J8700AP/A2 WA52J8700AP/AA WA52J8700AW/A2 WA52M7750AV/A4 WA52M7750AW/A4 WA52M8650AV/A4 WA52M8650AW/A4 WA54M8750AV/A4 WA54M8750AW/A4 WA56H9000AP/A2 WA56H9000AW/A2
- 【Compatibility】The replacement for samsung washer water inlet valve is compatible with WA456DRHDSU WA456DRHDWR WA45H7200AP WA45H7200AW WA45K7600AW WA48H7400AP WA48H7400AW WA48H7400AW WA48J7700AW WA48J7700AW WA48J7770AP WA48J7770AW WA48J7770AW WA50F9A6DSW WA50F9A7DSP WA50F9A7DSW WA50F9A8DSP WA50F9A8DSW WA50K8600AV WA50K8600AV WA50K8600AV WA50K8600AW WA50K8600AW WA50M7450AP WA50M7450AW WA52J8060AW WA52J8700AP WA52J8700AP WA52J8700AW WA52M7750AV WA52M7750AW WA52M8650AV WA52M8650AW WA54M8750AV WA54M8750AW WA56H9000AP WA56H9000AW
- 【Premium Construction】This washer water valve is crafted from high-grade plastic and stainless steel, featuring an upgraded metal filter mesh (instead of plastic) for superior filtration and corrosion resistance.
Rank #3
- Washer Water Inlet Valve Fit for Samsung WA400PJHDWR/AA-01 WA400PJHDWR/AA-02 WA400PJHDWR/AA-03 WA400PJHDWR/AA-04 WA40J3000AW/A2-00 WA45H7000AW/A2-02 WA45H7000AW/A2-04 WA45M7050AW/A4-03 WA45M7050AW/A4-00 WA45M7050AW/A4-01 WA45M7050AW/A4-02 WA45M7050AW/A4-04 WA45H7000AW/A2-00 WA45H7000AW/A2-01 WA45H7000AW/A2-03 WA422PRHDWR/AA-02 WA422PRHDWR/AA-00 WA422PRHDWR/AA-01 WA45H7000AP/A2-00 WA45H7000AW/A2-10 WA45H7000AW/A2-12 WA45H7000AW/AA-11 WA45H7000AW/AA-12 WA45H7000AW/AA-13 WA45H7000AW/AA-14 WA45H7000AW/AA-15 WA45H7000AW/AA-16 WA422PRHDWR/AA-03 WA45H7000AP/A2-12 WA45H7000AP/A2-13
- WA45H7000AP/A2-14 WA45H7000AP/A2-15 WA45H7000AP/A2-16 WA45H7000AW/A2-11 WA45T3400AW/A4-00 WA50R5400AV/US-00 WA54R7200AW/US-02 WA45M7050AW/A4-05 WA54R7600AW/US-00 WA54R7200AV/US-00 WA54R7600AV/US-00 WA50R5400AW/US-02 WA44A3405AW/A4-00 WA50R5200AW/US-00 WA50R5400AW/US-00 WA44A3405AP/A4-00 WA45T3400AP/A4-00 WA50R5200AW/US-02 WA50R5400AV/US-51 WA50R5400AV/US-03 WA50R5400AV/US-02 WA50R5400AV/US-01 WA45T3400AV/A4-00 WA50R5200AV/A4-00 WA50R5200AW/US-03 WA50R5200AW/US-51 WA44A3405AV/A4-00 WA54R7600AC/US-00 WA50T5300AC/US-01 WA400PJHDWR/AA-00
- WA400PJHDWR/AA-05 WA50R5400AV/US-0000 WA50R5400AV/US-0001 WA50R5400AV/US-0002 WA50R5400AV/US-0003 WA50R5400AV/US-0051 WA50R5400AW/US-0000 WA50R5400AW/US-0001 WA50R5400AW/US-0002 WA50R5400AW/US-0003 WA50R5400AW/US-005 WA45H7000AW/AA WA45T3400AP.
- Washing Machine Water inlet Vavle Fix leaking water, incorrect water filling, water inlets are connected to the cold and hot water at the back of the washer, control the flow of hot and cold water on and off.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.




