Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.
Yes, the problem is real—but IKEA buttons are not universally incompatible with Google Home. Reports published on February 5, 2026 described IKEA BILRESA remotes failing to stay paired, appearing late or inconsistently in Google Home, and sometimes failing to appear as automation triggers. IKEA acknowledged that some customers were experiencing Matter connection issues during setup and said it was investigating with ecosystem partners and the Connectivity Standards Alliance. 9to5Google reported the issue and IKEA’s statement.
The practical verdict is narrower than “IKEA buttons do not work with Google Home.” A button may pair successfully but remain unreachable, appear in the device list but not the automation builder, or expose fewer press events than it supports in IKEA’s own app. Matter establishes interoperability standards; it does not guarantee that Google Home will expose every button action as a routine starter.
What is actually failing?
Several different problems are being described as one “Matter issue.” Separating them makes troubleshooting—and buying decisions—much easier:
- Commissioning failure: Google Home cannot complete the initial Matter pairing.
- Disconnection: The button pairs, then later goes offline or disappears.
- Visibility failure: The device appears in Google Home but is missing from the automation builder.
- Delayed discovery: The button becomes available as a trigger only after a delay.
- Event limitations: Google Home exposes one press action but not double press, long press, scrolling, or another event supported elsewhere.
- Platform mismatch: The button works with IKEA Home smart products but cannot start a Google Home routine.
- Hub-linking failure: DIRIGERA itself proves difficult to connect to Google Home.
- Fabric confusion: Adding or removing devices can leave duplicate, stale, or missing entries when the same product is commissioned into more than one Matter ecosystem.
The February 2026 report described unreliable BILRESA pairing, missing automation-trigger visibility, delayed appearance in Google Home’s automation flow, and difficulty bringing DIRIGERA into Google Home. That evidence supports a genuine, platform- and environment-dependent problem—not a finding that every IKEA button fails.
#1 Best Overall
- [Multi-Protocol Hub with Matter Bridge] The M3 is a versatile hub supporting Aqara Zigbee and Thread devices. It integrates third-party devices into the Aqara Home app. Supports advanced Matter bridge functionality, enabling Aqara-exclusive scenes and signals to sync with Matter ecosystems such as Home Assistant for seamless integration. Supports up to 127 Aqara Zigbee devices （** Not third-party Zigbee devices) and 127 Thread devices (Repeaters are needed).
- [Edge Compatibilities and Local Automations] The M3 serves as an Edge Hub, prioritizing local control and automation. Upon integration, it supersedes existing Aqara hubs, shifting the automations among them to local operation (Some cloud-based notifications still require internet). Upgrade-friendly, it supports migrating Zigbee devices from older Aqara hubs.
- [Smart IR Blaster with Feedback and Learning] The 360°IR blaster not only sends commands but also provides accurate status updates by detecting traditional remote use. It connects IR air conditioning units to Matter, functioning as an AC thermostat when paired with an Aqara Temperature and Humidity Sensor. (Note: Only one AC device can be exposed to Matter. Functionality may vary based on the Matter integration app. For Apple Home exposure, use Matter integration instead of HomeKit.)
- [Optimal Wired and Wireless Connectivity] Offering both wired and wireless solutions, the smart home hub M3 provides dual-band Wi-Fi (2.4/5 GHz) with advanced WPA3 security, and a Power over Ethernet (PoE) port. The addition of a USB-C port allows for mini-UPS and power bank connections, delivering unparalleled stability. (2A USB power adapter is not included. ) . Note: To ensure a stable connection, place the Hub M3 between 6 to 19 feet from the router.
- [Privacy-Focused with Encrypted Storage, Easy Setup and Versatile Placement] The M3 prioritizes privacy by excluding microphone or camera components. It boasts 8GB end-to-end encrypted local storage, for device lists, configuration parameters, and automation configuration data. Additionally, it includes a mount and screws for flexible placement on flat surfaces, walls, or ceilings. Magic Pair technology ensures effortless detection by the Aqara Home app upon power-up.
Which IKEA button do you have?
“IKEA button” is too broad. BILRESA and SOMRIG serve different purposes and have different requirements.
| Model | Primary purpose | Connection | DIRIGERA requirement | Main caveat |
|---|---|---|---|---|
| BILRESA dual-button remote | Basic control and simple automation | Matter over Thread | Generally not required for direct Matter pairing | Google Home trigger availability may vary |
| BILRESA scroll-wheel remote | Group control, dimming, and additional actions | Matter over Thread | Requires a Thread Border Router for Matter-system connectivity | Scroll and multi-event support may vary by ecosystem |
| SOMRIG shortcut button | IKEA Home smart scenes | Designed around the IKEA ecosystem | Required on the current US product page | Its IKEA single-, double-, and long-press behavior should not be assumed in Google Home |
BILRESA
The BILRESA dual-button remote is Matter compatible and uses Matter over Thread. IKEA says it can control lights, groups, preset scenes, and up to 10 smart products, although the available functions depend on the connected ecosystem. The US IKEA product page showed a price of $6.99 on August 18, 2026; prices and availability can change.
The scroll-wheel BILRESA is a separate model, not merely a different software mode. Its additional controls do not prove that Google Home will expose equivalent scroll, dimming, or multi-event triggers.
Free tools Windows power users keep installed
One-click scans. No signup required.
Both models require two AAA/HR03 batteries, sold separately. IKEA’s manual gives an open-air range of 10 metres and says two new LADDA AAA batteries generally last approximately 24 months, depending on use and conditions. See the BILRESA product page and BILRESA manual.
SOMRIG
SOMRIG is intended primarily to trigger IKEA Home smart scenes. In that environment it supports single press, double press, and long press. The current US product page says a DIRIGERA hub is required. Its observed US price was $12.99 on August 18, 2026, with batteries sold separately.
That makes SOMRIG a different purchase from a low-cost, generic Matter button for Google Home. Choose it mainly for IKEA-native scenes unless the exact current Google Home support for your model and required press events has been confirmed. Details are on IKEA’s SOMRIG page.
Rank #2
- Multi-Protocol Smart Hub with Matter Bridge – The M100 is a versatile smart hub compatible with Thread devices and Aqara Zigbee (** Not third-party Zigbee devices), supporting up to 20 Aqara Zigbee devices and 20 Thread devices. As a Matter Bridge, it connects Aqara Zigbee products to other smart home ecosystems, compatible with Apple Home, Amazon Alexa, Home Assistant, etc. Note: Use a 5V⎓0.5A power adapter (not included) and keep the product continuously powered during use.
- Advanced Matter Bridging for Seamless Smart Home Integration – The M100 enables Aqara’s unique features, such as facial recognition and complex automation, to work across Home Assistant and other Matter ecosystems. Expand your smart home with Aqara or third-party Matter devices (requires a Matter-enabled hub). Currently supports lights, thermostats, plugs, switches, buttons, and various sensors (motion, light, door/window, temperature/humidity), with more devices to be added in the future.
- Local Automation for Reliable Performance – Supports local execution of automations for Zigbee and Matter devices, ensuring smooth operation even without Wi-Fi or cloud access. Enjoy millisecond-level response times for a more stable and reliable smart home experience. (Some automation, such as cloud push notification, will still require the cloud connection to be executed.)
- Flexible Power & Small Size – Features a universal USB-A port for power and data, allowing connection to power banks, wall outlets, PCs, or routers for a simple and quick setup. The Hub M100's shaft can be adjusted within a 210-degree range, making its placement extremely flexible.
- 2.4GHz Wi-Fi 6 for Faster & Security—This product supports a 2.4GHz Wi-Fi 6 wireless network connection, which enables more efficient connections with advanced WPA3 security. Wi-Fi 6 ensures smoother performance even in high-traffic environments, allowing multiple devices to connect without compromising speed or reliability. Note: To ensure a stable connection, place the Hub M100 between 6 to 19 feet from the router.
Why “Matter compatible” is not enough
Matter is the common application standard. Thread is the low-power wireless network used by BILRESA. Google Home still needs to provide the controller, device integration, and automation interface that interpret the button’s events.
Quick wins for a faster PC:
Clear out junk files and repair common Windows errorsFree Scan →Fix the driver behind crashes, sound loss and screen glitchesFind Drivers →Repair Windows errors before they cause bigger problemsFix Now →There are at least five separate layers:
- The physical device: battery condition, firmware, radio range, and supported press types.
- Thread infrastructure: a functioning Thread Border Router and a suitable Thread network.
- Matter commissioning: the process of adding the device to a Matter fabric.
- Platform exposure: whether Google Home displays the device and its events.
- Automation semantics: whether single press, double press, long press, scroll, or other actions can start routines.
Consequently, “compatible with Google Home” may mean that a product can be commissioned, displayed, or controlled. “Works as a Google Home automation starter” is a narrower claim. “Every press type works as a trigger” is narrower again.
IKEA’s Matter guide describes Google Home support and says DIRIGERA is recommended but not mandatory for Matter devices. IKEA’s product pages also warn that features can vary by hub, app, and platform.
What IKEA confirmed
IKEA acknowledged that some customers were experiencing connection issues during setup in certain home environments. The company said it was investigating with ecosystem partners and the Connectivity Standards Alliance.
That statement confirms customer connection complaints. It does not confirm that every BILRESA is incompatible with Google Home, nor does the evidence establish that the issue is entirely Google’s fault. Possible factors include IKEA firmware, Google Home’s Matter implementation, Thread infrastructure, controller behavior, or interactions among those components.
Do not treat the February report as proof that a later firmware, app, or Google Home update has fixed the problem. No dated fix should be claimed without an official changelog or reproducible verification.
Rank #3
- [Multi-Protocol Hub with Matter Bridge] The Aqara Hub M200 is a versatile smart hub that supports multiple advanced features, acting as a Matter Controller, Thread Border Router, and Matter Bridge. It integrates third-party devices into the Aqara Home app. With advanced Matter bridging functionality, it syncs Aqara-exclusive features with ecosystems like Home Assistant, Apple HomeKit, Alexa, and Google Home for seamless integration. Supports up to 40 Aqara Zigbee devices and 40 Thread devices.
- [Smart IR Blaster with Feedback and Learning] The 360°IR blaster not only sends commands but also provides accurate status updates by detecting traditional remote use. It connects IR air conditioning units to Matter, functioning as an AC thermostat when paired with an Aqara Temperature and Humidity Sensor. (Note: Only one AC device can be exposed to Matter. Functionality may vary based on the Matter integration app. For Apple Home exposure, use Matter integration instead of HomeKit.)
- [Wired & Wireless Connectivity with PoE Support] Enjoy flexible setup with dual-band Wi-Fi (2.4/5 GHz) using advanced WPA3 security, and Power over Ethernet (PoE), making the M200 a versatile PoE Ethernet Smart Home Hub. The USB-C port supports mini-UPS or power bank connections for uninterrupted operation, ensuring your energy-saving and security automations stay online. (*2A USB power adapter is not included. )
- [Home Automation and Alarm System] Works with all Aqara devices to create a comprehensive, smart home automation system. The Aqara Hub M200 is equipped with a built-in speaker that can be used in a variety of ways: security alerts, doorbell, alarm clock, and custom audio messages. (** 𝐍𝐨𝐭 𝐭𝐡𝐢𝐫𝐝-𝐩𝐚𝐫𝐭𝐲 𝐙𝐢𝐠𝐛𝐞𝐞 𝐝𝐞𝐯𝐢𝐜𝐞𝐬)
- [Local Automation for Reliable Performance] Supports local execution of automations for Zigbee and Matter devices, ensuring smooth operation even without Wi-Fi or cloud access. Enjoy millisecond response times for a more stable and reliable smart home experience. (Some automation, such as cloud push notifications, will still require the cloud connection to be executed.)
What you need for a direct Google Home setup
A BILRESA Matter-over-Thread setup needs both a compatible Matter controller and Thread infrastructure. The Google Home household must have a Google-supported Matter controller, such as suitable Nest hardware or another supported controller; exact requirements can change with hardware and software releases.
You also need a Thread Border Router. A Wi-Fi-only setup is insufficient for a Thread device unless another compatible device in the home provides Thread Border Router functionality. Keep the phone and controller on the intended household network during setup, avoid isolated guest networks, and maintain reliable Wi-Fi and local-network conditions, including IPv6 where required by the platform.
These are prerequisites and troubleshooting checks, not proven explanations for every reported failure.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errorsDocumented IKEA pairing and reset procedure
IKEA’s current Matter setup guidance is:
- Power on the device and put it into pairing mode.
- Open the preferred smart-home app, such as Google Home.
- Scan the Matter QR code on the yellow packaging cover.
- Add the device to a room.
- Wait for setup and device discovery to complete before building automations.
If the QR code will not scan, use the 11-digit numeric Matter code printed on the device or packaging. IKEA recommends DIRIGERA because it can connect older and newer IKEA products, act as a Matter controller, and simplify setup, but its guide says it is not mandatory for Matter devices generally.
For BILRESA specifically, press the system button to enter pairing mode. The pairing window remains open for 15 minutes. To pair directly with an IKEA smart product, quick-press the system button four times.
To factory-reset BILRESA, open the battery compartment and hold the system button for 10 seconds, or until the red LED stops blinking. After the reset, the remote automatically becomes available for pairing for 15 minutes. These are documented recovery steps, not a guarantee that Google Home automation bindings will be restored.
Rank #4
- Powered by SmartThings: Connect, monitor, and automate your home through the SmartThings app. Build a reliable, unified smart home using Samsung's proven ecosystem
- Matter + Zigbee Smart Home Hub: Supports the newest Matter standard plus Zigbee for lighting, sensors, plugs, switches, thermostats, and more - thousands of compatible devices. PLEASE NOTE: Z-Wave not supported
- Easy Setup with Wi-Fi or Ethernet: Get started in minutes using Wi-Fi or a wired Ethernet connection for apartments, houses, and expanding smart home systems - Z-Wave not supported
- Automations That Work for You: Create custom routines for security, lighting, comfort, and energy savings. Many local automations continue working even if your internet goes offline
- Wide Device Compatibility: Connect compatible smart devices from Aeotec and many other brands to build a unified system for lighting, voice control, energy management, and climate settings
A cautious troubleshooting workflow
- Identify the exact model. Confirm whether it is the dual-button BILRESA, scroll-wheel BILRESA, SOMRIG, or another control.
- Install fresh batteries. Check that the device enters pairing mode and is within a reasonable range of the Thread network.
- Check the infrastructure. Confirm that a Matter controller and Thread Border Router are operating in the intended home.
- Check the network. Keep the phone on the household network rather than a guest or isolated network during commissioning.
- Remove the failed device where appropriate. Clear the old controller entry before attempting a new commission, but do not assume this will always repair existing routines.
- Reset BILRESA using the documented 10-second procedure.
- Pair again. Use the Matter QR code or 11-digit numeric code.
- Allow discovery time. A device can appear in Google Home before it becomes available in the automation builder.
- Start with one simple action. Test a single-press routine before attempting more complex automation.
- Test only exposed events. Try double press, long press, or scroll actions only if the specific model and Google Home present them.
- Test IKEA Home smart separately. If available, use DIRIGERA to determine whether the physical button works within IKEA’s ecosystem.
If the remote works in IKEA Home smart but not as a Google Home routine starter, that points toward an ecosystem-feature, controller, or Matter-bridge limitation rather than proving that the button is defective. That is a practical inference from the different platform paths, not a confirmed diagnosis for every home.
What DIRIGERA improves—and what it cannot promise
DIRIGERA is a wired IKEA hub that connects to the router using the supplied cable. It can serve as:
- the central controller for IKEA Home smart scenes and routines;
- a bridge for IKEA’s broader smart-home system, including older devices;
- a Matter controller for supported Matter products; and
- a device providing Thread Border Router functionality.
DIRIGERA is a sensible choice when the home is primarily IKEA-based, includes older TRÅDFRI or Zigbee products, needs IKEA-native scenes, or would benefit from a dedicated Thread Border Router. It is less attractive if you want a hub-free Google Home setup, have no convenient Ethernet connection, or only want one inexpensive button.
Most importantly, DIRIGERA is not a universal cure. IKEA recommends it for simpler setup, but the February 2026 report also described difficulty linking DIRIGERA through Google Home. Adding the hub does not guarantee that Google Home will expose every BILRESA or SOMRIG event as a routine trigger. The observed US DIRIGERA price was $119.99 on August 18, 2026.
Buying advice
Choose direct Matter-to-Google Home pairing when:
- You already have a compatible Thread Border Router and Matter controller.
- You need only a basic button event.
- You want to avoid buying another hub.
- You accept that Google Home may expose fewer controls than IKEA Home smart.
Choose IKEA Home smart with DIRIGERA when:
- Your home is mainly IKEA equipment.
- You own older IKEA products.
- IKEA-native scenes matter more than platform neutrality.
- You want the officially documented route for SOMRIG.
- A wired hub and additional cost are acceptable.
Consider another Matter ecosystem when:
- Google Home recognizes the device but does not expose the trigger you need.
- You require richer multi-press or scene-controller support.
- You already own a different Matter controller that better supports generic buttons.
The evidence here does not support naming one competing hub or platform as definitively better. The correct alternative depends on the exact button events and devices you need to automate.
Before you buy
- Do not buy SOMRIG expecting a hub-free setup; the current US product page says DIRIGERA is required.
- Do not buy BILRESA solely because the listing says Matter compatible.
- Confirm that your home has Thread Border Router coverage.
- Check whether Google Home exposes the particular event you need, not merely whether it can display the device.
- Budget separately for two AAA batteries. IKEA’s LADDA rechargeable AAA batteries were listed at $9.99 for four on the cited product page, but regional price and availability are volatile.
- Treat user reviews as anecdotal reports, not proof of either universal failure or universal success.
The current bottom line for Google Home users
IKEA’s BILRESA and related controls can be attractive low-cost Matter devices, but the Google Home experience is not yet predictable enough to promise plug-and-play button automation. The reported issue is real, IKEA has acknowledged some Matter setup problems, and failures can occur at pairing, connectivity, device visibility, or automation-trigger stages.
Buy BILRESA for inexpensive experimentation if a basic event is sufficient and you already have the required Thread and Matter infrastructure. Choose SOMRIG plus DIRIGERA when you specifically want IKEA Home smart scenes. Buy DIRIGERA for its broader IKEA ecosystem benefits—not as a guaranteed fix for Google Home’s button automation problems.
Quick Recap
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Leave a Reply